Result: knobs

Then reinstall the knob and secure the cover. He said you will want to do this on both sides of the bed. | front corner wants to raise up in wind . is there an extra clamp you can put on that corner? 2018 Chevy Colorado |...

The Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR with Custom Wiring Adapter # 3020-S will give you what you want - a brake controller that is completely out of your way so there is no bulky unit underneath your dash. The Tow-Pro's knob will allow you to install the knob anywhere you like which makes the unit extremely convenient. |

If the clamp like the part # EX1034 is tight even after unscrewing knob that would mean it's either seized up and would need to be sprayed with some WD-40 to try and release it or it is some how binding up to the shaft of the threads. |

Hey Thomas, the clamp like the part # EX1034 is tight even after unscrewing knob that would mean it's either seized up and would need to be sprayed with some WD-40 to try and release it, or it is somehow binding up to the shaft of the threads. |

When it is time to remove this tonneau cover all you have to do is the following: fold the tonneau cover, slide the clamps toward the center of the truck bed, and undo the torque knobs at the bulkhead of the truck bed. It weighs just 35 lbs, so it is not particularly heavy. |

If you don't mind spending a little more on the brake controller, the Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional # RED52VR would be a much better option than the two Curt controllers. |

At the top of the page the photos show a plastic latch and knob adjustor for the tenion , and at the bottom pictures it shows a metal latch with an automatic spring adjustor ? | Good morning, I am going to buy a tonnaeu cover...

The main unit for this controller hides behind the dash with only a small control knob on the dash to adjust the brake force. For you 1997 Coleman Fleetwood Taos you will need 2 Hub/Drums # AKHD-545-2-1K. | I just bought a...

So I would use wheel locks and a coupler lock such as # FA86-0015-318 as an example (there are many types of coupler locks) similar to how a door might have a lock at the knob and a dead bolt lock. Now, if only the tow vehicle was that secure. |

I recommend the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR since you can mount it out of sight and only have the control knob in the cab of your vehicle. If you let me know which vehicle you have I would be happy to let you know if there is a custom wiring harness for installation. |

Lastly for a trailer brake controller I really like the Redarc Tow-Pro Elite # RED44FR as it was designed specifically for overlanding, and with only the knob of the controller visible it keeps a factory look inside of your tow vehicle. |

We don't offer a Subaru-specific bezel for the control knob but a universal model is available as part # 331-TPSI-007, or you could modify the switch knockout as shown in the video. | I have a 2021 Subaru Outback Onyx XT....