Result: knobs

The box can then be placed as far forward in the truck bed which will butt it up against the forward-most ladder rack knobs. You could then have the bolt that the second set of knobs uses go through the sides of the box and thread on the knob from the inside of the box to hold the toolbox in place though this may require a longer bolt. |

If you take a look at step 14 in the attached instructions manual, you can see the locking mechanism and how to activate it. There is a pinwheel knob located on the cab rail that holds a lever in place that will need to be positioned towards the driver's side to lock the cover or towards the passenger side to unlock the cover. |

If you take a look at step 14 in the attached instructions manual, you can see the locking mechanism and how to activate it. There is a pinwheel knob located on the cab rail that holds a lever in place that will need to be positioned towards the driver's side to lock the cover or towards the passenger side to unlock the cover. |

Any how if I purchase the sliding rack can I put a truck box on the truck. Would the knob be in the way on the forward rack? Thank you | I have a 2018 Tundra with deck rails, my tracrac one that I had on the Tacoma wont fit...

The front and rear uprights are easily adjusted and secured in place with the twist of a few knobs, and the rack is also rated up to 1,250 pounds. | I recently purchased a 21 Chevy Silverado 1500 with a 6 1/2 foot bed and am...

The integrated, quick-release clamping knobs can be loosened to move rack, tightened to secure it in place and the rack can be removed from track quickly and easily. | What is the best choice of rack that works WITH the Sentry...

At the top of the page the photos show a plastic latch and knob adjustor for the tenion , and at the bottom pictures it shows a metal latch with an automatic spring adjustor ? | Good morning, I am going to buy a tonnaeu cover...

Both of these offer a 500 lb weight capacity and they do have adjustable uprights but you need a tool to relocate them as opposed to the hand knob for the Thule system. The other thing to know is that these use square bars without a T-Slot so you wouldn't be able to use a carrier for your boat. |

So I would use wheel locks and a coupler lock such as # FA86-0015-318 as an example (there are many types of coupler locks) similar to how a door might have a lock at the knob and a dead bolt lock. Now, if only the tow vehicle was that secure. |