Result: knobs

Is it possible to get a couple extra plastic knobs for the trailer mirrors. One of the knobs has bad threads, cant get it to start on the hook bolt. | Is it possible to get a couple extra plastic knobs for...

For the KVL-2310-C, do you sell just the knobs? | For the KVL-2310-C, do you sell just the knobs? | Hello Jay, thanks for reaching out. We do have the # KLV-2310-C hardware kit which comes with two clips and two knobs. The knobs...

Have power at the controller, no lights at the knob. | Have power at the controller, no lights at the knob. | I would start by using a hook probe tester like the # PTW2993 to check and see if you're getting a power feed on the...

These slip on over your factory mirrors and use the arm and knob to keep them secure. | I have a 2015 2500 Chevy Silverado that I would like to purchase the towing mirrors that snap on with no knob to hold it. What is the part...

This kit fits your towing mirrors and the CTM1600 mirrors. The knob by itself is not currently available as a separate part. | I have a set of CMT 4000 for my 2003 Toyota Tundra. They have worked just GREAT..... BUT I have...

will I need extra clips and twist knob/ screws with my order of the tow mirrors for my 2019 Ram 1500 new style. | will I need extra clips and twist knob/ screws with my order of the tow mirrors for my 2019 Ram 1500 new style....

This kit comes with two knobs and two hooks like you mentioned wanting. | I need a set of replacement hard ware for the 2500 . The hooks and knobs. 2 sets if possible. Thanks | The replacement hardware kit you need for the Longview...

This kit will include 2 hooks and 2 knob for two mirrors. | Can I purchase a second set of fasteners to carry with me? Thank you | Yes, you can purchase an extra set of hook and knobs for your Longview Custom Towing Mirrors,...

Is this knob the ground connection or what is the difference between the adapators that do or dont have this knob? | I have a 2003 4 Runner with tow package the factory hitch connection is 7 flat. I have a...

To level the sensor, you will set the power knob to maximum by fully rotating it clockwise (with the trailer connected). | Light on controller goes from green to a light green. No assist. Will not adjust with the riflght diel....

I made you a short video that shows how to replace the knob provided that the little tabs on the back of the knob or where they mount are not damaged. | While installing and checking operation, as I activated...

You are going to want the Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional # RED52VR, don't forget to grab a Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-001 for one of those empty spots on your dash. |

Mine have the hook with the threaded section to the knob with a small support stud between and are plastic. | I reached out to Mike Gergely at Longview Towing Mirror for replacements and he referred me to you the seller from...

As a test I held the P2 at no upward angle in my hand and applied the manual power knob, with no increase / improvement in braking power. | Hello eTrailer. I recently installed the Prodigy P2 Brake Controller on my 2017...

Check to be sure that the power knob is not set all the way to the lowest position. | I just hook up a pilot controller and if i hit the break pedal the dot in the middle lights up, but if i use the button on the controller...

Finally, tighten the hand knob to secure the towing mirror in place. | I have a 2021 chev trail boss, will lo54fr fit? | Yes, the Longview Custom Towing Mirrors # LO54FR are compatible with all models of the 2021 Chevy Silverado...

Now for installing the knob of the controller you will need to pick a spot that you have at least 3/4" clearance for the knob, and 1-3/4" space behind the location for the back part of the knob to have enough clearance. |

It has a manual slide, a power knob on the right and another knob on the left. | Its a Journey model # 527408045 approx. 7 yrs. old. I lost my manual and want to set it up for a new trailer. Is there a manual...

Also no lights on the control knob! | How do you make the brake controller think it is connected to a trailer with brakes? Just to make the unit light up. I have no lights on the control knob. I do lights on the tester for...

Then rotate the Level Knob clockwise until you see a shade of orange on the light. | I have the four wires hooked up, have power to the controller. But it doesnt go from green to orange/red when I try leveling the sensor....

Installation is a snap: Just slide the towing mirror over your OEM mirror and insert the provided arm and hand knob through the back of the mirror housing. Then hook the arm around the inside edge of your OEM mirror. | will...

The main unit measures 3-3/8" long x 3-15/16" wide x 1-1/8" tall and the control knob measures 2-3/8" long x 3/4" wide x 7/8" tall. | Im interested in Redarc Tow-Pro Elite # RED44FR because the control can be hidden and placed...

This is with the power knob all the way clockwise. Thanks | My green light looks like its on with trailer disconnected but when my trailer is connected the green light is much brighter. Also, I was trying to adjust my level...

The hooks of the # LVT-1700 that secure it to the mirror housing are plastic. The knobs of the hooks are also plastic. | LVT-1700 hardware. Are the mounting hooks metal, with plastic nuts? What thread do the mounting hooks use?...