Result: knobs

If they still will not budge you may have to break off the knob and drill out the threaded portion. We do have the Replacement Knob # TAKB-90030-1 or the Locking TracKnobs # TH25700 you will be able to use to replace your knobs. |

The knob controls the braking power and also acts as the manual override. | • Bolt diameter of Part : RV54FR • Trailer brake controller and plug-and-play adapter to fit: 2022 Fleetwood Discovery 36Q motorhome with the Freightliner...

We offer bracket # 853-5513, knob # 753-0783 and carriage bolt # 915-0660-31. | I have the Hull-a-port Aero 838 kayak rack made by Thule. The mounting kit that came with it has a flip fit mechanism to attach the kayak rack to...

If you are able to install and tighten the existing mounting hardware then what I suggest is to simply use some thread locker like # LT37420 to keep the knobs from backing off as you drive. It is generally safer to use the hardware made for the cargo basket. |

This consists of 4 sets of u-bolts, knobs and top and bottom plates. It may be necessary to drill a few new holes in your box to accommodate the new hardware kit. | I have purchased a 2014 Yukon and with limited space now wish...

The addition of new bolts and knobs would be beneficial as well and I see the kit includes all of this, but dont know if it will be large enough for this 4 3/4inch spread. | Would the #SR04952 kit accommodate a 4 3/4inch spread?...

If you are willing to drill new holes at whichever points will allow you to mount the box I recommend going with simple U-bolts, the Replacement Mounting Hardware for Car Top Cargo Roof Cargo Box # CTC-18PARTS which is just U-bolts, plates and hand knobs. You will definitely want to use the Loctite RTV 598 High-Performance Silicone Gasket Maker # LT37467 as sealant for the other holes in your rooftop box. |

The brake controller also needs to be mounted within the range specified in the instructions and not tilted or turned to the side. The leveler knob on the left side of the controller will also need to be in the proper position (straight up and down). |

Then you will need the Locking Knobs # TAKB-90030-1 (4) as stated in the answer you referenced. | Jason S. answered a question for another customer that was exactly what I was looking for in his answer to Recommendation...

Another option is to use other differently-sized U-Bolts, but that might involve drilling if they don't match the 4" holes in your box, and you would have to get matching plates and knobs. An example are replacement Rhino Rack bolts # RUBK which are 2-1/4" wide and 2-3/4 deep which are ideal for the generally narrower square or round bars. |

So I would use wheel locks and a coupler lock such as # FA86-0015-318 as an example (there are many types of coupler locks) similar to how a door might have a lock at the knob and a dead bolt lock. Now, if only the tow vehicle was that secure. |

Drilling is required and it installs with U-bolts and hand knobs. It will be a great choice for you...sorry I missed that in your previous question. | Hi I have a 2013 Toyota Corolla. What’s would you recommend for a rack and...