Result:

Can you get me a set of Optronics STL87 Smoke Series lights? The manufacture part number is - Polypack part no. STL87DSRSHBP | Hey Glen. We've got a couple of options for Optronics Smoke Series lights but we don't have the STL87DSRSHB which...

I am looking to upgrade the rear lights of my Car Mate 5x8foot utility trailer. I currently have Peterson PM444L lights. I am hoping to use the TLL16RK set however I am not sure if they will fit. The Petersons have the standard 2 inch center...

Will this mount to the crossbars on the ADARAC truck bed rack? Looks like they use t-slots, but unclear if this rack will work. | Hello Randall, thanks for reaching out. Yes, the Inno Fork Lock Roof Bike Rack # INXA391 can indeed be used with...

Hi I’m looking at purchasing a new Ford Ranger - and would like to outfit it with a locking tonneau cover with low/mid height towers and cross bars across the bed and tonneau cover. Here’s the tricky part we have two step through e-bikes weighing...

Where is this manufactured? | Hi Peter; Optronics does have some manufacturing facilities in the US but as far as I know the components included in the Optronics Trailer Light Kit # TL16RK come from their facility in Taiwan. |

Hello, I have 2024 Ford Ranger Raptor and was wondering if this would fit since i have the raptor? Part RAS29VR. Was also wondering if they have air bags instead. I have a trailer that’s 4,500 pounds that i haul and I’m looking to get more stability...

Inno Truck Bed Cargo Rack - Standard Beds - Mid-Size Trucks Part Number: INRT101-65 Before I purchase, I would like to make sure that the above part number comes with the c -clamp mounts and the cross bars. Also, can you recommend a thru axle...

I have a thule roof rack on my truck with square bars. I need to replace the bars too much corrosion and I need a set up to hold 2 canoes approximately 75. Any suggestions? | The older style of Thule square bars are no longer made but I do have...

I have the trailer lights wired through a conjunction box to a WesBarg 7-Way, RV-Style Connector w/ 6foot Long Coiled Cable - Trailer End - WG54006-043. the turn and brake lights work. the right side running lights work but not the left. | On...

Can you guys help me with fitment of this basket on Rhino Rack Reconn bars? I believe that that there is a way to mount this with the c channels on a Reconn bar. Very similar to the mesh basket and BP4 connectors from the Australia. Can you...

Will this fit a SAE AP2 01 replacement amber side maker lens for a 2007 Rockwood Freedom 1640 LTD tent trailer? | If your original light is 4" L x 2" W x 1-1/8" D then Optronics light # MC32AB will fit in its place. If you have different dimensions...

Hello, I have a camper and the receiver for the bunk light has a 5.5mm female connector but my bunk light/fan is a 1/4 in stereo jack. Is there an adapter or would I replace the existing Jacks? Thank you | We don't have an adapter, but...

I have purchased a 2006 Ford Ranger Pickup which I want to flat tow behind my motorhome. Are there special brackets to mount on the pickup for the tow bar or are they universal mounts. I need to order a tow bar and brackets but I am not sure...

Looking for a complete LED submersible wiring kit for my 1991 ranger bass boat trailer. the kit would include 2 amber and one red LED on each side and sort of oval red brake/turn/tail lights and 2 small red rear lights as seen in the attached...

What parts do I need? | If you haven't already the first thing you want to do is make sure your 2000 Ford Ranger can even be flat towed with all 4 wheels down behind a motorhome. From my research the 4-wheel drive model can as long as it's...

Id like to upgrade my non- reflector trailer lights with your reflectors only. Are there any requirements as to how close these should be placed to the side marker lights? Thank you. | Trailer lighting requirements will vary depending on the...

Hi, Are there any recommended ways to secure the rack components, once installed, against theft? Thanks | If you wanted to use the Inno Velo Gripper Bike Rack # INRT201 and then lock the bike to the truck your best option would be a cable...

The signal wire from the right turn signal is disconnect somewhere in the vechicle, so where does the green wire start from in the 2000 ford ranger? I put all new wiring harness on boat trailer and it still does not work. | If your 2000 Ford...

please provide all dimensions of bracket and plate it sits on. | I went out to our warehouse to take a few measurements on both the clamp and mounting plate for the Inno Velo Gripper Bike Rack # INRT201. The black plate measures 4 inches long...

How can I attached Obtronics led license light to a pre-installed Curt aux led indicator lights, #5302? I have a hitch mounted cargo carry or is there a product that incorporates indicator lights and license plate light? | The Optronics LED...

base plates for a 2002 ford ranger super cab standard 4 wheel drive - can I use a front mount hitch to attach tow bar? | A front-mount hitch such as # C31063 cannot be used to flat tow a vehicle such as your 2002 Ford Ranger because you would...

I have a 2002 Ford Ranger just put new wire harness and lights on my trailer but now neither lights work when I turn on the turn signal in the truck.I did check all the fuses in the cab of the truck,but the fuses under the hood you cant tell...

Do you have a kit that will work with a 1989 ford ranger? I want to set it up to be towed behind RV. | We can help you with the items you'll need to flat tow your 1989 Ford Ranger behind your motorhome. These include components like the tow...

I have a 2003 Ford Ranger and I really want to purchase your inno truck bed rail bike mounting system. I do not have utili-tracks or any of that stuff, just a plain truck bed with plain sides. I would like to know which model I would need...