Result: knobs

The Master Lock Electric Trailer Winch, # 2953AT, has a clutch knob on the side of the winch. You will need to loosen the knob in order to allow the winch to free spool. | how do we pull out cable from spool...

I need a replacement ratchet plunger knob for a Fulton F2 3200 lbs model FW32000101 boat winch. | I need a replacement ratchet plunger knob for a Fulton F2 3200 lbs model FW32000101 boat winch. Can you help? | Hello Kenneth. I...

Once you have selected your combination numbers, turn the knob back to the original position in a counterclockwise direction. | how do you set the combination? | I went out into our warehouse and pulled a Master Lock Quantum...

I also need a control knob for opening and closing the vent. And, a spare tire and rim, a Loadstar K550, ST205/75, D15. | I have a 2010 Royal Cargo trailer and I need a replacement vent top. Metal, if available, but plastic...

Basically, the brake will always be applied when powering in and will only be released when you activate the freespooling clutch knob to let the cable out. | Does this winch have a brake for trailering aboat on trailer?. Does...

I went out to the warehouse and pulled Repair Kit for Fulton Channel Tongue Coupler # F520801 to measure the bolt used to thread the knob on. It is a 5/8 inch coarse threaded bolt. | What is the thread size of this hand wheel....

Will the 3794DAT fit this hitch considering the little half-round wall thing in front of the twist knob? | Attached is a photo of the hitch on the trailer Im going to rent. It will be parked at a friends house for the weekend...

Is there anyway to temporarily lock this hand nut Knob M6 Low on the M6 carriage bolt of the 593 Wheel-ON Wheel Carrier to prevent theft of the carrier from the car roof? | Is there anyway to temporarily lock this hand nut...

I went out to the warehouse and pulled Repair Kit for Fulton Channel Tongue Coupler # F520801 to measure the bolt used to thread the knob on. it is a 5/8 inch coarse threaded bolt. If this will not work, let me know the brand coupler you have, the capacity, and the ball size it is for and I can determine if we have something that will work. |

This is a power load in only winch, and has a clutch knob that allows freewheeling out for the cable. | I have a 1987 Dodge Pickup and a Ranger Trail boat trailer. I will use this to load 18foot Ranger Bass Boat. Does this...

What about the spring that I assume activates the in-gear/out knob. Any issues there, or with the in-out pull handle mechanism? | Before purchasing one of these am looking for weaknesses/plusses. On the Fulton 2-spd, is the...

The other option we have for you is the Titan Coupler part # T2343400 which has the same multi-fit knob as the Fulton but the manufacturer does state will work with a 50mm hitch ball as well as a 1-7/8" or 2" hitch ball. |...

To stop you would need to stop turning the handle, hold it there, and then manually turn the pawl knob to the opposite setting. I have attached the mounting hole pattern for this winch as well. | I see very little choice in...

If you want to try to have some control unloading/loading, you will have to stop turning the handle, hold it there, and then manually turn the pawl knob to the opposite setting. The winch does come with a 2 inch by 20 foot strap with a 2,000 pound capacity. |

Maybe Im not understanding how these mast-type bike locks work, but it appears to me from the video that all a thief would need to do is to loosen the knobs on the wheel cradles, slide the wheel cradles backwards thus freeing the tires, shift the tires slightly to the side off the cross-bar upon which the wheel cradles are mounted, and then lower the bike to the ground to make off with your bike. |

So I would use wheel locks and a coupler lock such as # FA86-0015-318 as an example (there are many types of coupler locks) similar to how a door might have a lock at the knob and a dead bolt lock. Now, if only the tow vehicle was that secure. |

You also cannot use a latch style pin lock like part # e98887 on the knob latching mechanism but you can use a surround lock like part # ML389DAT. | I need to change my boat trailer brake actuator. You sell Titan and Demco....

Lastly, do not forget you will need a brake controller installed in your tow vehicle to operate the electric brakes, such as the Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional # RED52VR. If you could please provide the year, make, and model of your tow vehicle, I would be happy to see if we have a vehicle-specific pigtail available to make the installation much easier. |