Result: Brake Controller

Hi, I have a 1988 Ford Ranger 4x4, currently without a brake controller but with a trailer 4 pin | Hi, I have a 1988 Ford Ranger 4x4, currently without a brake controller but with a trailer 4 pin connector for...

what would be the best brake controller and wirer harness pulling a 7x 16 tandum axle trailer have | what would be the best brake controller and wirer harness pulling a 7x 16 tandum axle trailer have 1988...

is there a trailer brake controller adapter wiring to plug controller in without having to hard | is there a trailer brake controller adapter wiring to plug controller in without having to hard...

Hello I have a 1988 k1500 with a tekonsha voyager brake controller. The light is not lighting up | Hello I have a 1988 k1500 with a tekonsha voyager brake controller. The light is not lighting up green when...

a brake controller Which controller and are ther wiring diagrams for this hookup Thanks | I have a 1988 fleetwood pace arrow with a 7 pin connector for my tailer I would like to install a...

so i could use the Curt Spectrum Trailer Brake Controller and to change over to a 7 slot connection | I have a 1988 chevy 1500 with just a 4 pin trailer wire at the back what kit or kits would i need so i could...

Hello, I am n the process of installing a electric brake controller in a 1988 Ford F-350. My | Hello, I am n the process of installing a electric brake controller in a 1988 Ford F-350. My questions are did...

trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes | I have a 88 Plymouth Voyager minivan. I have hitch already installed, but no harness....

for to see if my RV is wired for a plug and play brake controller? At the 7-way female plug it looks like | My 1998 Fleetwood Flair on a Chevy P30 chassis with 454ci engine. What should I be looking for to...

will include the 7-way connector, wiring, and hardware needed to wire the brake controller to the trailer | Hi, Could you possibly help me out with a diagram of how to install a tekonsha p3 into a 1988 Chevy...

# 90195 brake controllers. The P3 has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer | I need to purchase a brake contoller. I am looking at tekonsha prodigy P3 or P2. I have a 1988 ford...

The brake controller install kit part # ETBC7 that you referenced is totally compatible with your | is there a ETBC7 wiring harness to fit my 1988 ford e250? | The brake controller install kit part # ETBC7 that...

Which Tekonsha P3 Prodigy brake controller model do you recommend for a 1988 Chevrolet P30 Step Van | Which Tekonsha P3 Prodigy brake controller model do you recommend for a 1988 Chevrolet P30 Step Van 1 ton...

for the brake controller and power wires to the front of the vehicle. I would recommend the Prodigy brake | I am planning to purchase tear trailer with electric brakes and need to know what...

There isn't a brake controller wiring harness for the 1988 Chevy K1500 so the brake controller | how to install on a 1988 chevy k1500 , already have drawtight activator II |...

brakes, so you'd need to install a brake controller. I'd recommend a proportional controller like | Have a 1988 Chevy dually 1 ton crew cab given to me by my brother, in good...

slab side? Opinion? Best Brake Control? Opinion And $$$ is always an issue but safety first... Right | I have a 1988 Ford F-250 HD with a 35 gallon tank where the original 19 gallon and spare tire used to...

Hi. I was wonder what the 360 degree feature is that is listed with the Elite Controller? Thank | Hi. I was wonder what the 360 degree feature is that is listed with the Elite Controller? Thank you. | The 360 degree orientation...

controller for your truck you will need one to control the brakes on the trailer; for that I recommend using | I have a 1988 F350 crew cab dually with a 7.3l diesel and a Lance camper that...

WD Compatibility w/Surge Brakes - I own a 1988 Jeep Cherokee/4Dr/4WD/5-Speed manual. My | WD Compatibility w/Surge Brakes - I own a 1988 Jeep Cherokee/4Dr/4WD/5-Speed manual. My receiver is a Class III Reese 37013? I transferred...

I bought a brake controller and 7 pin setup from your company. I installed the t connector | I bought a brake controller and 7 pin setup from your company. I installed the t connector on a 1988 C/K Chevy pickup....

to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round | I got your info from a friend who you had helped previously so I hope I’m reaching out to the right person. I’ve...

to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking | I want to flat tow my 88 Mazda B2200 with Manuel transmission behind my RV. My owners Manuel doesnt help. Will...

and Trailer Tow Relay Blocks are located in the engine compartment near the brake master cylinder | Hello, I have a problem with my 1999 Ford F-250 Diesel. I just replaced the trailer connector but I still do not have running...