Result:

Part Number: INBRP9 I was interested in this part my a Inno Lowdown cruiser but after looking at the QandA section there is conflicting information. One expert response says it is compatible and another says that it is not. Could you please...

Will this mount to the crossbars on the ADARAC truck bed rack? Looks like they use t-slots, but unclear if this rack will work. | Hello Randall, thanks for reaching out. Yes, the Inno Fork Lock Roof Bike Rack # INXA391 can indeed be used with...

Hi I’m looking at purchasing a new Ford Ranger - and would like to outfit it with a locking tonneau cover with low/mid height towers and cross bars across the bed and tonneau cover. Here’s the tricky part we have two step through e-bikes weighing...

Inno Truck Bed Cargo Rack - Standard Beds - Mid-Size Trucks Part Number: INRT101-65 Before I purchase, I would like to make sure that the above part number comes with the c -clamp mounts and the cross bars. Also, can you recommend a thru axle...

I have a thule roof rack on my truck with square bars. I need to replace the bars too much corrosion and I need a set up to hold 2 canoes approximately 75. Any suggestions? | The older style of Thule square bars are no longer made but I do have...

Can you guys help me with fitment of this basket on Rhino Rack Reconn bars? I believe that that there is a way to mount this with the c channels on a Reconn bar. Very similar to the mesh basket and BP4 connectors from the Australia. Can you...

please provide all dimensions of bracket and plate it sits on. | I went out to our warehouse to take a few measurements on both the clamp and mounting plate for the Inno Velo Gripper Bike Rack # INRT201. The black plate measures 4 inches long...

Hi, Are there any recommended ways to secure the rack components, once installed, against theft? Thanks | If you wanted to use the Inno Velo Gripper Bike Rack # INRT201 and then lock the bike to the truck your best option would be a cable...

Can you please confirm the Yakima roof rack that fits my 2020 Subaru Legacy sedan? I'm pretty sure it's the rack that attaches with the fixed mounting points but I do want to make certain before buying. Also, what the correct wind fairing is...

I have a 2013 Kia RIo 5 with a blank roof. I am looking at buying the Aluminum Roof Mounted Cargo Basket but how do I mount that with a blank roof? | For your 2013 Kia Rio 5 door, to add a roof basket you will first need to add a roof rack....

will this fit my 2018 legacy? Rhino-Rack RS 2500 Roof Rack for Naked Roofs - Vortex Aero Crossbar - Aluminum - Black Item # RRRS707B | We do have several roof rack fits for your 2018 Subaru Legacy, but the crossbar you mentioned is a fit for...

I have a 2003 Ford Ranger and I really want to purchase your inno truck bed rail bike mounting system. I do not have utili-tracks or any of that stuff, just a plain truck bed with plain sides. I would like to know which model I would need...

I thought I had finally settled on the rack I wanted, but I need to verify one small detail: the link below is to the rack in question. In the product summary it states non locking. The actual product page show key slots so I assume it actually...

Will this rack clear the pop-up rear of a factory sunroof on a 2018 Subaru Legacy? | For your 2018 Subaru Legacy with a sunroof the Inno Roof Rack part # INXB115-2, # INXS200, and # INK439 is a confirmed fit and will work well. You won't want...

Hi, I am interested in what roof rack options are available for a naked roof. I have a 2008 Mazda 3 and 2014 Subaru Legacy. Ideally, the roof rack would be able to swap back and forth. thanks! | The best option we have would be a roof rack...

You show a Rhino Rack roof rack item number RR39RR Rhino-Rack ROC25 Roof Rack for Naked Roofs - Vortex Aero Crossbars - Aluminum - Black Item # RR39RR which appears to be discontinued by Rhino. Please confirm that this kit is intended for my...

Will this fit and securely hold 2 kayaks without damaging the car? Thank you. | The Inno Aero Crossbar Roof Rack that you referenced, which consists of # INXB145-2 for the two 57 inch Aero Crossbars, # INXS250 for the Through Feet, and # INK439...

I want to make sure I am purchasing the correct equipment. I have a 4 door 2010 Subaru Legacy. I would like to purchase roof racks and any accessories needed to transport 2 paddle boards. Thanks. | The Semi-Custom roof rack # SR1010 is listed...

Does the low profile INNO XS 2000 fit the 2015-2017 Subaru Legacy Sedan? | Yes, you can use the Inno XS200 feet, # INXS200, on a 2015 to 2017 Subaru Legacy sedan. In addition to the feet you will also need the bars, # INXB115-2, and the custom...

Hi, Im looking for a roof rack for a Kia Rio 2014, EX, bare roof, sedan | The Inno Aero roof rack part numbers # INXB123-130, # INXS250, and # INK608 is a confirmed fit and a great option for your 2014 Kia Rio sedan with a naked roof. This gives...

i am about to buy a 2013 kia rio. i have yakima bars for the roof that i use for my 2006 hyundai elantra and would like to use them for my 2013 kia rio. will they work? | The Yakima roof rack you referenced is not longer available and not compatible...

Hi! Do you carry the INTR and the INTR104 for the replacement feet and fit kit for my Inno square crossbars? They are getting rusted. | Yes! For your 2007 Subaru Legacy Wagon, you need the Inno Feet for Square Crossbars # INTR and the Custom...

i am looking for the most affordable and reliable roof rack and the proper attachment for skis and snowboards. I just want to make sure that I am purchasing the right rack and the right attachment. | For your 2008 Subaru Legacy Sedan the most...