Result:

My fifth wheel has standard landing gear legs. Is that the RV24FR kit? | Hey Dennis! If your fifth wheel uses standard 2" square leveling jack legs, the RVpaws articulating jack pads # RV24FR is the correct kit. If the legs are standard 2" round...

Looking for a recommendation for wheel chocks for my equipment trailer. Fully loaded my truck and trailer weigh 32k. The ones I have don’t secure the trailer during loading. | Hey David. For your equipment trailer, I recommend the Rumber 20"...

I bent one of the factory jack feet on my RV. Are these RVpaws pads a stronger replacement? | Good question, Mark. The RVpaws V2 pads are definitely stronger than most OEM setups. They are built from 1/4" plate steel with 6 gussets, so they’re...

Is if trailer parked on on slight incline is fine how do I is I keep the trailer from rolling when not hooked to toe vehicle | In order to keep a trailer from rolling on a slight incline, what you will need are wheel chocks. You will simply...

Which RVpaws pads fit an Equalizer leveling system on a motorhome? I have factory 12" round. | Hi Jeff! For an Equalizer leveling system with 12" round feet, you’ll want the RVpaws V2 Premium Articulating RV Jack Pads # RV84FR. These are made...

Do these RVpaws jack pads move with the ground, or are they fixed like the factory feet? | Good question, Linda. The RVpaws V2 pads are designed with an articulating ankle, so the foot can pivot up to about 10 degrees instead of staying rigid...

Can I put leveling blocks under RVpaws jack pads? | Yes, Chris. You can use leveling blocks under RVpaws jack pads when you need extra height or want to reduce how far the jack ram has to extend. That can actually help keep the setup more stable,...

Are the RVpaws pads sold individually or as a pair? | Hi Mike! The RVpaws V2 jack pads come as a pair, so each kit includes 2 pads. If you are replacing 4 jack feet, you’ll need 2 kits. The correct part will depend on your setup: - # RV24FR...

I’m not sure which RVpaws kit fits my camper. How do I pick the right one? | Good question, Dave. The easiest way is to match the RVpaws kit to your jack leg or leveling system. For example, there are specific kits for the brands and lineups...

Which RVpaws pads fit my Equalizer leveling system? | Hi Robert! For an Equalizer leveling system, you’ll want the RVpaws V2 Premium Articulating RV Jack Pads # RV84FR. These are made for Equalizer motorhome leveling systems and come in a pack...

Do you have this available with the chain already? | The Flint Hill Goods Wheel Chock w/ Eyebolt # FHG36ZR isn't offered with the chain or a rope installed already but we do have an alternative option with the Rumber 8" Wheel Chocks w/ 3' Pull...

1. Can I use the Super Grip Chock Wheel Stabilizer Item UF21-001090 to hold a 3500-pound trailer in place on a moderate slope? 2. What would you recommend for this application? | The Super Grip Chock Wheel Stabilizer for Tandem-Axle Trailers...

So, does the break away pin once pulled keep the rpod from rolling backwards. Some campsites can be somewhat inclined which is a little unnerving even with chocks behind each wheel. I was wondering if the braking system keeps the trailer...

I have seen the wheel chocks like the anderson and am looking for something similar. I have a Jayco Seneca 37RB which has 40 diameter tires. most of the chalks only fit up to 32 tires. Any suggestions? Thanks | We have just the chocks for you!...

Will these wheel chocks in the attachment also be good to use on my 2020 Hyundai Palisade when backing up a 21 foot boat on a tandem boat trailer on a boat ramp? I assume good for the actual boat trailer itself. | The Runber # RM74FR tire chocks...

• Bolt diameter of Part : RV54FR • Trailer brake controller and plug-and-play adapter to fit: 2022 Fleetwood Discovery 36Q motorhome with the Freightliner XC chassis | Hey Oscar! I'm assuming you want the diameter of the bolt end that runs into...

I have Lippert Level Up jacks with factory 9 inch pads. Which RVpaws kit should I use for my Keystone 5th wheel? | Hi Angela! For that setup, you’ll want the RVpaws V2 Premium Articulating RV Jack Pads # RV34FR. These are made for Lippert Level...

Can I use SnapPads with these RVpaws feet? | Yes, Steve. The 12" RVpaws jack pad feet are compatible with the SnapPad Xtra # SP74FR, which is sold separately. The RVpaws give you the articulating steel foot with more surface area than OEM, and...

Are RVpaws sold as a full set or do I need to order more than one kit? | Hi Terry! The RVpaws V2 jack pads come in a pack of 2, so the number of kits depends on how many feet you’re replacing. For 4 jack feet, you’d need 2 kits. Just make...

I have Lippert Ground Control 3.0 landing gear. Which RVpaws kit do I need? I see some universal and some for lippert brand. thanks | Hi Brian! For Lippert Ground Control 3.0 landing gear, you’ll want to match the RVpaws kit to the shape of...

What is the difference between RV24FR and RV57FR? | Great question, Karen. The difference is the jack leg shape. The # RV24FR fits standard 2" square leveling jack legs, while the # RV57FR fits standard 2" round leveling jack legs. Both are...

I want to buy chocks for my 38foot diesel motor home which weighs approx 38,000 pounds. Can you recommend which chocks would be best? I was looking at Rumber 16inch chocks with a chain. Would that be a good choice? Thanks for your help! |...