Result: RV lock

Hey Shelly! The Velit Portable Diesel Heater #VE76QV does not have a built-in fuel tank. It uses an external diesel supply instead and includes a 6' fuel line that connects to the heater. For the fuel source, you can use the Velit 1 Gallon…

Hey Michael! We are still carrying Draw-Tite hitches. However, their parent company had some legal problems and went bankrupt so the brand is for sale right now. Most of their products are currently out of stock, so you won't find them on our…

Hello Sue, thanks for reaching out. The best cover for your 2022 Keystone Cougar 316rls Fifth Wheel is the Adco SFS AquaShed RV Cover for 5th Wheel Toy Haulers up to 37' Long #290-52256. Basically, when it says "toy hauler" that just…

Great question. Yes you can use the Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU #FR93FR to replace your Suburban water heater. It does not have an active freeze protection and will need to be winterized. It will perform best…

Hey Jay, yes the wet bolts for the suspension hangers are included with the MORryde X-Factor part #MR33WR that you referenced. In the attached picture you can see the new looking silver wet bolt holding the CRE3000 equalizer.

The #42 E-Z Lube Spindle w/ Flange #TRU37FR has a 1"-14 thread size. A replacement Trailer Spindle Nut #165686 is available if the treads are damaged on the castle nut.

The MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR includes new wet bolts for the hangers on your 2022 Keystone Montana High Country 351BH 5th wheel camper. So you will not loose the ability to grease your hanger bolts.

Thank you for the pictures of the lock core and lock. From those I could tell you have a lock from Fastec Industrial Corporation (FIC) on your 2006 Georgie Boy Pursuit Motorhome. I was also able to determine you have a M315 lock core from your other…

As long as the door has some sort of lip for the hook part of the Camco RV Baggage Door Catches to grab onto they'll work for you. Use part #CAM44173 in polar white or part #CAM44163 in colonial white.

Hi Laurie! It's nice to hear from you. The Flap Jack is a great product but I would not recommend using the Flap Jack with your setup, mainly because your SnapPad brings the foot to about a 10 inch round diameter and the top of that block is…

I spoke with my contact at Valterra who said that the Valterra Waste Valve Body #TC372 would be able to replace the Bristol Valve body that you currently have installed but that they haven't tested their cable kits like part #TC72PB with Bristol…

Hey Bob, thanks for reaching out, and good question. For the #MR93RR hand rail, the 33" of clearance needs to be measured with the step folded up. Basically, you measure from the edge of the step where the rail attached straight back. There…