bing tracking image

Search: draw tite v 5   >   Trailer Brake Controller   >   Indicator Lights  x   >  

Truobleshooting Inability to Shift Truck Without Hitting Manual Override on Brake Controller

I have a 2010 Ford F150 with a Draw-tite activator trailer brake controller for 1-4 axles | I have a 2010 Ford F150 with a Draw-tite activator trailer brake controller for 1-4...

Draw-Tite Brake Controller # 5504 Does Not Have Power After Switching Out Goosenecks on a 1999 Z71

controller. My technical contact at Draw-Tite indicated that you probably just need to re-install your | rewired a goose neck trailor and blown light fuses on my truck found that problem and...

How to Test Trailer Brake Controller with Direct Power Input to Bypass Vehicle Wiring

Since you have confirmed that your Draw-Tite Activator # 5504 trailer brake controller is getting | I get 12 v from plug pin from battery and output to trailer. Control doesn’t...

Troubleshooting ER Error Code on Draw Tite Activator Brake Controller

. Assuming that is the case, the "Er" code indicates an internal short and the brake controller will need | What do i need to do? What does this mean? | The DrawTite Activator 5100 referenced...

Troubleshooting Draw Tite Activator Brake Controller that Has Brake Light on All the Time

If the brake light indicator of the Draw-Tite Activator Trailer Brake Controller # 5504 is on all | brake lights on the time...

Troubleshooting Draw Tite Activator that Shows Intermittent Connection

weekend i went to hit the brakes and only a dot came up. No trailer brakes, all the trailer lights work | OK last week the controller worked fine, gave me...

DrawTite Activator Brake Controller 5504 Flashing Error Code

It sounds like you installed the Draw-Tite Activator Trailer Brake Controller 5100 in a vehicle | Flashes error | It sounds like you installed the Draw-Tite Activator Trailer...

Why is Brake Controller With Low Voltage Not Activating Trailer Brakes

I have a drawtite series 5000 controller. As of now it will not activate my trailer brakes. I am | I have a drawtite series 5000 controller. As of now it will not activate my trailer brakes....

Should the BK Indicator Light on the Curt Adapter be Lit up While Vehicle is Off and No Trailer

power and then watch the 12V indicator light as someone uses the manual override on the brake controller | Should the Bk light indicator be lit up when my...

Tekonsha Brake Controller Indicator Light Flashes on a 2005 Dodge Ram when Truck is Off

The indicator of course goes NC when my brakes are applied on the truck with no trailer. The light | The indicator of course goes NC when my brakes are applied on the truck...

Green Light No Longer Shown On Reese POD Brake Controller

My POD brake controller green led doesnt light up anymore when connected to my trailer. I checked | My POD brake controller green led doesnt light up anymore when connected...

Solution for Draw Tite Brake Controller Where Light Stopped Working

. Typically the light indicates that the brakes are working but it is possible your light just has problems | After working fine for many years, the LED does not consistently...

What is a 6o Error Code For Draw-Tite Activator IV Trailer Brake Controller # 5504

Draw-Tite Activator IV Brake Controller # 5504 indicates that you have a sync issue. The sync control | This is an intermittent problem. When I apply the brake...

Troubleshooting Draw-Tite Activator 5504 Constant Braking

Your Draw-Tite Activator Trailer Brake Controller # 5504 is showing a brake signal when that red | Hi there, Ive had this system for about a month now, and...

Troubleshooting Green Light on Brake Controller Stays on Without Braking

are getting that light without a trailer connected it is an indication of a slight draw on that brake output | Hi, I am having trouble with green lights staying...

Wiring and Display of the Draw-Tight Activator 2 on a Nissan Titan

. Also, are the numbers suppose to light up always when brakes are applied or only with trailer hooked on? | I need to wire brake controller to Nissan titan. The plug has 5 wires and the controller...

Trailer Brake Controller Wont Light Up and Trailer Brakes Do Not Work Even with Manual Override

When a brake controller like your Draw-Tite Activator # 5100 does not light up to indicate | the light on the controller wont come on and trailer brakes wont...

Troubleshooting Locked Trailer Brakes with Activator Brake Controller Displaying No Connection

Since the Activator Brake Controller 5100 does not have a display chances are that you have another | I have a DrawTite activater2...I have a dot on the display when hooked to the trailer | Since the Activator...

Troubleshooting Draw-Tite Activator Trailer Brake Controller 5504

On the Draw-Tite Activator II trailer brake controller # 5504 the red dot on the front panel | Everything is hooked up correctly and I get voltage at the brakes but when I check...

Troubleshooting Trailer Brake Controller Indicator Light When Connected To Trailer Without Brakes

Would the indicator light on a Tekonsha Voyager come on if a trailer with no brakes were connected? | Would the indicator light on a Tekonsha Voyager come on if a trailer with...

Installing a Brake Controller Based on Wire Function Because Wire Colors Arent Consistent

I have the Draw-Tite Brake Controller 5504. I have installed this on a 2013 GMC Sierra. I used | I have the Draw-Tite Brake Controller 5504. I have installed this on a 2013 GMC Sierra. I used...

What Does The Code OL Mean on Draw-Tite Activator Brake Controller # 5504

power from the controller back to the trailer connector and to the brakes. You will want to inspect | What does the code OL stand for on activator 4 | If the display on your Draw-Tite Activator...

Daw-Tite iCommand Brake Controller Causing Lights To Not Work

lights to malfunction on your 2006 Ford E250. I would start by testing your brake controller | When I plug in my3035-p tekonsha Ford brake control harness into my 2006 e250 van port under...

Troubleshooting Trailer Lights Not Working and Brake Controller Not Recognizing Connection

function. The your electric brake controller connection indicator light should be on when your trailer | I have a 71 nomad that when I plug into my truck...

Filter Your Search