Result: Step Support

If you have a circuit tester like # PTW2993 you can test the power at the RV wiring to see if it is delivering the full 12V required for the steps. | I just replaced the step motor. Now with the step in up position...

Since you have 2004 Kwikee Electric Steps, the correct replacement part is actually Motor Upgrade Kit for Kwikee Electric RV Steps # LC379145. | Will this part be compatible with my step controlller...

When step closes it vibrates with a new motor and module replaced what is wrong? | I am not sure what model steps or motor you currently have, but there are a few reasons why there might be some vibration when closing the step. The first thing...

Please note, if installing on exterior wall on aluminum trailer steps will need to be taken to prevent galvanic corrosion. | Could I bolt this to front wall/rail on my aluminum trailer? | The CE Smith Offset Spare Trailer Tire...

Since you have tested your Lippert Replacement Motor for RV Electric Sliding Steps # LC301695 directly at your battery and found it to operate properly the issue you're having is likely to be related to the RV's wiring. |

I attached a help article that covers installing solar panels on an RV but it seems like you are on the wiring of the panels to your RV step so for that you'd need a controller like the # FSCC30PWBBL which can handle three of your panels so you'd need two of them. |

In order for the trailer entry steps & windows to be on the 'Lake View' side of the trailer the tow bar must be "in". | Is there any hitch product that can be mounted to the rear frame of a 24foot Keystone Cougar travel trailer...

It's not a long or involved process by any means, it is just an additional step that you'll need to do to tow. One final component that is needed is a charge line to prevent the battery on your Explorer from draining. | What...