Result: Step Support

You can remove the four screws from the cover which will allow you to pull it out. Then remove the 3 screws to pull it free from the door/cover and reverse the steps to attach the new one. ...

The electric step door magnet switch part that attached to the Rv door is gone. | The electric step door magnet switch part that attached to the Rv door is gone. Can I purchase just that and attach to the door...

Question: How easy is it to INSTALL the Flexco Manual Pull-Out Steps for RVS on my 2006 Honda Pilot? | Question: How easy is it to INSTALL the Flexco Manual Pull-Out Steps for RVS on my 2006 Honda Pilot? | The...

I do have an option for you but if the motor is hardwired to the controller then that tells me you have a unit that was made before 1999 and in which case the Replacement Motor part # LC379147 won't work and you'll need the Motor Upgrade Kit for Kwikee Electric RV Steps part # LC29VR. |

Will my Aventon Aventure Step Through E-Bike fit on this, or other, bike rack? | Will my Aventon Aventure Step Through E-Bike fit on this, or other, bike rack? My vehicle is a 2018 Honda Pilot. Thanks | Your Aventon Aventure...

In order to install a brake controller and 7 pole adapter, you first need to install the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118336. I have attached a step-by-step installation video. Next you will need to install the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat # ETBC7 to convert the 4-way to 7-way. |

Will my 2017 harness support a 5 pin plug? Thank you | I installed a 4 Curt plug wiring harness on my 2017 Pilot a few years back. I now need a 5 plug harness to control my electric surge brakes. Can I convert, or do I need...

Additionally, please note that when using any hanging rack like the RidgeBack you'll need bike frame adapter bar # Y02531 if your bike is dual-suspension, has a step-through frame or you want to carry a small children's bike....

If the issues you are having are still there after re-installing, just email me a picture of the hitch installed and I would be happy to go over more in-depth troubleshooting steps. | Hello, I bought a Solid-Tow Adjustable...

If you already have a 4-way connector, then you can skip the previous step. You will then need to install a 7 and 4-way Installation Kit, # ETBC7. | Will this work on my 2009 2wd Pilot Touring or will I need to hard wire the...

The anti-sway cradles will keep the bikes from making contact with each other. If you have any step-thru bike frames you will need a frame adapter bar like # 64005 to hang the bikes level. | I’m looking for a solution to...

You will likely, however, need a bike adapter bar, # HRBA-PRO, for any bike with a step through or alternative frame, like most women's and kids's bikes do have. | I have a Honda Pilot 2019. What are some options for a 5 bike...

I ended up pulling the entire thing out of the vehicle frame - but even with it out I couldnt release the factory installed cover. I kept pushing the top tab on the cover and trying to wrestle the cover off with pliers. |

If you don't see 12V power on the brake controller pin then you know the wiring wasn't run and you can follow the steps mentioned above as if you don't have the tow package. | I have ordered and received several items, but...

| I suggest a first step be a check of your Honda Pilot manual to confirm the tongue weight (TW) and gross towing weight (GTW) ratings for your factory-installed 2-inch hitch receiver. | I have a 2012 Honda Pilot that I plan...