Result:

| The only leveling systems we carry are the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote - 4-Point Set # LC358590 and 6-Point Set # LC675817 which use the OneControl touch panel. |

In addition, you will also receive the proportional action of the Brake Buddy Classic 3 which applies the Wrangler's brakes at the same level that you apply the brakes to your RV. With the braking system, you will need a brake light relay in order to not override your RV's signals. |

The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. | If I flat tow a 2004 Jeep Wrangler...

Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 Safety Chains - RoadMaster 68" Single Hook, Coiled Safety Cables item # RM-643 Charge Line - Roadmaster Battery Charge Line Kit for Towed Vehicles item # RM-156-25 Supplemental Braking System - Roadmaster InvisiBrake Supplemental Braking System item # RM-8700 High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

I am looking to set my 2001 TJ Jeep for towing behind my RV. Is the Demco Classic Base plate # DM9518045 compatible with the Blue OX Acclaim tow bar? | I am looking to set my 2001 TJ Jeep for towing behind my RV. Is the...

The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. | Will this base plate fit a 2002...

The rest of the parts you will need to flat tow your 2005 Jeep TJ are listed below: Tow Bar and Safety Chains - Blue Ox Alpha 2 Non-Binding Tow Bar item # BX7380 Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 for a 7-Way connector or item # HM56202 if your RV uses a 4-way connector Supplemental Braking System - Brake Buddy Select 3 Portable Supplemental Braking System item # HM39524 High Low Adapter - The tow bar needs to be within 3" of level. |

Hi guy’s, I need a flat tow system for our 2002 Jeep Wrangler TJ, incl base plate, wiring and brake system. Our RV is a 2002 Newmar Dutch Star 3893 with electric brakes system for the trailer. | Hi guy’s, I need a flat tow...

The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. | I’m wanting to get a tow bar setup...

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry. | Hello, I am looking for a complete towing package...

You will also need the Roadmaster Brake-Lite Relay Kit # RM-88400 to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. The brake light switch wire for your Jeep is white/tan colored. |

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry. | I want to flat tow my jeep TJ behind my motorhome....

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry. | I have a 2002 Jeep Wrangler TJ. Bumper is factory...

High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |