Result:

This alarm can detect levels as low as 30 ppm. | I was told that these are only good for 7 years. Does the seven years start from the manufacturing date? How exactly do these detect CO? Thanks, | The lifespan of the Atwood...

The 2020 Mercedes Forest River Prism is a Class C Motorhome, we do not currently carry any hydraulic self leveling system at this time for the Class C. The best option we have would be to use multiple Ultra-Fab Power Twin II Electric Stabilizer for Trailers and RVs - 22" Lift - 6,000 lbs # UF39-941707. |

I have towed this edge will my RV for 2 yrs 8 to 10 m miles p/ yr and the following problem came once last yr twice yesterday. | I have towed this edge will my RV for 2 yrs 8 to 10 m miles p/ yr and the following problem...

These are the correct snappads for my 2022 Jayco Precept 31ul correct? | I would love to tell you exactly what you need but unfortunately that is not possible. The reason for this is that not all 2022 Jayco Precept 31UL's come with the same...

The tow bar needs to be within 3" of level from the RV motorhome to the front of your Ranger. | Need to prep my new ford 2023 ranger to be tow in the back of rv What cable do I need between my rv and thé ranger...

To flat tow a 2023 Ford Ranger with a Blue Ox Base Plate and tow bar you will need the following parts: Tow Bar and Safety Chains - Blue Ox Alpha 2 Non-Binding Tow Bar item # BX7380 Base Plate Kit - Blue Ox Base Plate Kit - Removable Arms item # BLU77XR Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 Supplemental Braking System - SMI Stay-IN-Play DUO Supplemental Braking System item # SM99251 or item # SM99243 if your motorhome has air brakes Both of these systems will also require the item # RM-88400 in order to prevent the Ranger's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. High Low Adapter - The tow bar needs to be within 3" of level. |

High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

I recently had this system installed by a local rv dealer maintenance department. My tow vehicle is. 2023 ford ranger and trailer is 180 Rpod. | Hi. I recently had this system installed by a local rv dealer maintenance department....

Here's the parts you'll need to flat tow a 2018 Jeep Wrangler Unlimited Sahara: Tow Bar and Safety Chains - etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates item # e74ZR Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-521453-5 Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 Supplemental Braking System - Demco Stay-IN-Play Duo Braking System for RVs w/ Hydraulic Brakes item # DM86VR. High Low Adapter - The tow bar needs to be within 3" of level. |

In addition, you will also receive the proportional action of the Brake Buddy which applies the Edge's brakes at the same level that you apply the brakes to your RV. With the diode kit, this will allow you to connect your RV's tail, brake, and turn signal lights to your Edge's lighting system. |

In addition, you will also receive the proportional action of the Brake Buddy Classic 3 which applies the Ranger's brakes at the same level that you apply the brakes to your RV. The required relay kit keeps your Ranger's brake signal from overriding the turn signal sent by your RV. |

Looking for a base plate for a 2022 Ford Ranger 4x4 with LED lights or a complete tow package to tow it behind my RV. | Looking for a base plate for a 2022 Ford Ranger 4x4 with LED lights or a complete tow package to tow it...

The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. | Can you flat tow a Ford Edge 2008...

Lastly you will likely need a high-low adapter to level your tow bar to your RV so I have included a link to a helpful article that goes over how to measure for the correct adapter, and a link to all of our high-low adapters for you to take a look at. |

To flat tow your 2023 Ford Ranger you will need the following parts: Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-524459-5 Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 Supplemental Braking System - SMI Stay-IN-Play DUO Supplemental Braking System item # SM99251 or item # SM99243 if your motorhome has air brakes High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

To flat tow your 2023 Ford Ranger you will need the following parts: Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-524459-5 Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 Supplemental Braking System - SMI Stay-IN-Play DUO Supplemental Braking System item # SM99251 or item # SM99243 if your motorhome has air brakes High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

I have listed them below: Tow Bar and Safety Chains - etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates item # e44ZR Base Plate Kit - Roadmaster Crossbar Base Plate Kit - Removable Arms item # 483-1 Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 Supplemental Braking System - Brake Buddy Select 3 Portable Supplemental Braking System item # HM39524 High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

To flat tow your 2024 Ford Edge ST you will need the following parts: Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-524460-5 Wiring Harness - Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for LED Tail Lights item # RM38FR Battery Disconnect Switch - Roadmaster Battery Disconnect with Switch for Towed Vehicle item # RM-766 Supplemental Braking System - SMI Stay-IN-Play DUO Supplemental Braking System item # SM99251 or item # SM99243 if your motorhome has air brakes High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

The steering wheel would need to be unlocked so that the vehicle can track behind the RV around corners. For a base plate kit you would need the part # 483-1. | Hi can i flat tow 99 ranger xlt stickshift also do i leave steering...

The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. | can I tow all 4 down with out taking...

The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. | I was told by the Ford sales manager...

The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. | I have a 2007 Ford Ranger sport2wd...

The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. | Do you have a video of how to install...

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry. | I need to flat tow a 2020 ford ranger 4x4 behind...