Result: pop

On a Viking pop up trailer the winch is locked and I can’t reverse it | Not all winches are reversible but on a pop up I would assume it is and it normally can crank both directions. Sometimes you have to relieve some tension in the setup by...

How do I get a pop up on a 1999. To reverse and go down | Without knowing the make and model of your pop-up camping trailer, all I can do is give you some general help. It sounds like you can get your pop-up camper roof up but are not able...

Do you have a recommendation for a replacement jack on our 1999 Viking pop up M-2465. The current jack is a side mount, top wind, Alko 8 in wheel with # 244304123973? | That's an interesting jack, and there are no specific replacements for it...

I have a 2002 viking pop up and I need to replace the crank jack with wheel but not sure what weight capacity I should get | The capacity of the jack you choose needs to be greater than the tongue weight of the fully loaded and ready to tow...

Will this Jack work for a 12 ft. box Coleman Pop-up Camper. My top winding jack just stripped out this weekend and Im looking for a replacement. | As long as the tongue framing on your Pop-up Camper is 3x3 or 3x4 inches and you will have clearance...

I am looking to replace the electric worn out winch on my pop up camper with a manual winch. Looking for an economical option to sell pop up. The old winch is in a capped area of the frame just behind the hitch and jack. There is a whole for...

looking for a swivel bolt-on electric trailer jack. 1500 3000 lb Fleetwood pop up trailer tongue has no coupler hole | I recommend taking a look at the Fulton F2 Swing-Up Jack # F1413230134 for your pop up trailer. This is a really nice,...

I have a 2007 Viking Pop up camper. The welded on wheel jack broke off, very cheap design. Can I replace with this type of bolt on Swivel Jack? Can I mount on either side, left or right? Is this 1600 rating lb sufficient for the weight? Its...

I’m looking for a replacement jack for Jay Series pop up camper. Normally, I would just order it, but the problem is this jack is small and the “normal” jack sizes won’t fit. It’s an A-frame center mount. I think the diameter is about 2” or...

Is this the same fender that is on a 2010 6.0 Livin Lite trailer, with 12inch wheels. | Trailer makers do not maintain specific details about the items like fenders that are installed on their trailer products but we do carry a wide range. I...

I have a new pop up, with an off road package. The tongue height is a somewhat ridiculous 21 inches, and the jack that came with it is inadequate. Even when the jack is relatively low the single caster wheel refuses to turn, and it provides...

I have a 2004 Viking Legend 2485ST pop up camper, and my top-wind trailer jack with 8 wheel needs to be replaced. The jack uses a clamp to hold the 48mm 1.9in OD tube, and it must be unclamped and retracted upward to get the wheel out of...

Hello, I had a trailer jack with a wheel that came with the 2,300 lb pop up trailer, this jack broke two days ago. I am looking to buy one but all of them say max capacity 1,500 Lbs. am I ok with a jack like that ? did I explain myself...

Which spare tire carrier do you recommemd for bumper or tongue of 1995 coleman utah pop up? thanks | A lot depends on the wheel bolt pattern of your spare tire and the frame size of the trailer. I have included a link to an FAQ article on measuring...

My trailer frame is 3inch tall by 2inch wide. Will this jack work on this small of a frame? Coleman Cheyenne Pop-up | The Fulton # FXP15 will indeed be compatible with a 3 x 2 inch trailer frame member. I've confirmed this with my Fulton representative....

Will the hooks for RP49151 fit on the holddowns for Reese kit 30140. These holddowns are 1.5 in all the way across and require a deep hook to fit over them. Thanks | You're going to want a bigger size like the 1/2 inch # FCHA0070324 that I attached...

Should grounding strap on boat trailer be behind the folding tounge? Fuse keeps popping on running lights only. | Normally a fuse that wants to blow isn't related to an insufficient ground but I would recommend having the ground strap connect...

I have a fulton winch on my boat trailer...can send pics but I don't see a model #....and the spring for the catch lever popped off a few weeks after use. Wondering if you carry replacement springs. | We have a wide range of replacement parts...

i have a 1978 apache solid state hard sides pop up would the fulton bolt on jack fit 3 inch frame ? | The Fulton F2 Swing-Up Trailer Jack, # F1413040134, fits up to 3 inch by 4 inch frames, so there is a good chance it will fit your trailer...

The cap on the crank handle that keeps the black plastic tube in place popped off and is gone. Can I get a replacement cap? It is the round metal pressure fit cap that is about the size of a quarter but shaped like a hat. This is for a Fulton...

My pop-up camper has an AL-KO tongue jack, part number 1222434, that needs replaced. The problem I have is that the part is not sold in the US as its a German company. Are there any viable replacement options? | Hey Nick, That is a very interesting...

I bought grease caps 1.98 of for my 87 coleman pop up camper they wont fit they are the same size as my of on axel I need to purchase 2 smaller in size grease caps any suggestions ty | We do have a grease caps that are smaller than those with...

So Ive been looking through countless trailer jacks and not finding what I think I need. Wondering if Im looking for something that doesnt exist. I have a welded on snap ring jack on my popup camper. I did the axle flipinch and now it doesnt...

Hi, I am needing a replacement dust cap for a Fulton 800 lbs jack, to keep the dirt and grit out of the gears. The inside diameter is 1-13/16”. Do you carry that part? | I spoke with the Fulton rep to get more clarification. He told me that...