Result: Boat Loading Guide

Yes the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect # TLA7311S that you mentioned does come with the needed drill bit and guide to install the kit. | Hello, Does this kit include the returnable...

While we definitely have what you need, I am guessing there was maybe a misprint in regards to the tongue weight, which can't be a max of 3,500 lbs (tongue weight is generally 10%-15% of the trailer's maximum loaded weight). So I am guessing that the trailer's overall max loaded weight is 3,500 lbs, which makes a lot of sense because you mentioned your boat was 1,600 lbs. |

Which I recommend depends on how often your truck has the camper and is towing the boat. Or at least how frequently you switch between having the truck loaded to not loaded. | I have a 2004...

Hello, I would like to know if this weight distributor could be used for a 40-foot boat trailer to load a very heavy boat? keeping in mind that the truck I use is a 2003 dodge ram 3500. | Hello,...

The fully loaded and ready to tow tongue weight of your boat and trailer is likely in the 600-1200 lb range. | I have a 2000 Ford F350 Super Duty Diesel Pickup and need to know what other parts I need in order...

With the weight of the Arctic Fox 865 and the occasional boat trailer, you can adjust the air pressure to match your load and keep the truck level. | I have a 2015 ford f350 diesel 4x4 long box SRW. I have...

Will this help with my ‘05 F250 w/a 6” lift, that’s typically loaded with tools and pulling a 24’ boat w/ a large motor sway and sag are my main issues? | Will this help with my ‘05 F250 w/a 6” lift, that’s...

The RAS gives up to 2000-lbs of load support so it will be ideal for your combination of camper weight and trailer tongue weight. | I have a 2018 Nissan Titan and I plan on purchasing this product but I need to know if it...

My concern is that when fully loaded, water 65 gallon cap and personal items + my boat using a 36 inch extension with a superhitch tongue weight approx 350lbs that I will sag even further. | Hey gang, I have...

This trailer has smaller 8 inch wheels so it is low to the ground so you can get your boat on the bunks when loading up. Like the Malone trailer, the CE Smith comes with a winch so you don't have to make a separate purchase. |

For your 2019 Ford F-150 Raptor towing a 6000lb boat I recommend using the RoadActive Suspension Leaf Spring Enhancement Kit # RAS3611 you purchased as it will be the best at preventing sag like you are experiencing, but will also eliminate axle wrap and minimize sway and body roll giving you a better driving experience loaded or unloaded. |

I put a slide in pop up camper in the bed that weighs 1100lbs and tow a smaller boat with about 100lbs of tongue weight. The camper is fairly easy to load and unload so I keep it unloaded when not using. ...

Keep in mind that suspension upgrades improve ride and handling but do not increase load capacities. | In need a Heavy Duty Roadmaster Active Suspension Kit for a 2002 Chevy Suburban 1500, 4x4. | RoadActive # RAS4611 Active...

The boats dry weight is about 3500 pounds. If you include 50 gallons of gas, a few hundred pounds of gear, and the weight of the trailer, Id estimate the load being about 4500-5000 pounds no, I dont know exact weights. |

I want to move my kayak on trailer by hand, but getting older. kayak loaded weights 100lbs how much does trailer weigh. | I want to move my kayak on trailer by hand, but getting older. kayak loaded weights 100lbs how much...

With camper on I will need a 24inch extension to pull boat. Boat and trailer weight total 6500 lbs. Whats best for the extension? | I have a 2014 Dodge Ram 3500 with a Class V factory hitch. With camper on...

You can measure the loaded boat trailer TW with scale # e99044. Since it is pretty tough to estimate that part of the camper's weight, I suggest you err on the high side and choose a system rated for the 1000-1200-lb TW range, such as the Equal-I-zer # EQ37120ET. |

Currently, there is no sag with the popup loaded. Do you suggest air springs and if so do you have any that are no-drill? | I have a 2005 Toyota Tundra 4WD with 265/70R16 tires. Ive just added a popup camper on the back and...

The correct system will depend on the fully loaded and ready to tow tongue weight of the boat trailer. | I have a 2017 F350 dually with an 1172 lance slide in camper. I have the factory 3inch ford hitch. ...

I pull a tandem axle ski boat and dont like when i hook the boat up , it looks like it is squatting. | I have 2001 gmc sierra 1500 LD 2 wheel drive extended cab truck. My truck has a 3 inch lift on it. I...

I have a 2022 F-350 Super Crew 4x4, and this part is a match, according to the etrailer fitting guide. The description of this part on your page specifically says no drilling required but I see 2 drill bits included in the kit, and what looks to be a drilling template/guide...and it sure looks like there are 3 screws that need to go through the leaf spring to mount the bottom plate. |

I will be purchasing a 42 inch extension and I need a load distributing hitch which is recommended with a 42 inch extension for what I’m towing I have a boat with a 700 pound tongue weight and 7000 pound overall trailer weight But I also have an in bed camper that weighs 4150 pounds Can someone tell me what low distributing hitch system I need for the set up? |

I'm attaching a photo of a 2017 Colorado towing a boat trailer with this kit installed - what type of trailer are you planning on towing? | Do these help with sagging when hooked to a trailer? | Hey Jeff, thanks for reaching...

is there just one size or one weight capability, i.e. medium load size vs heavy load size. Do not need to handle extreme heavy loads, just pulling a large fishing boat. |...