Result:

A Curt Trailer Hitch Receiver for a Kia rondo 2009 what car brands aré compatible to install the tráiler Hitch | Hey Adrian, I attached a link to an installer locater that you can use to find someone to install the Curt hitch part # C11031 on...

What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...

I am looking for a trailer hitch for a Kia Rondo that was manufactured in Dec, 2006. I dont see one in your listing earlier than 2007. Thank You | That is because you most likely have a model year 2007 Kia Rondo that happened to be built in...

have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...

I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. However - after install, I now experience a lot more noise at low RPMs. Theres vibration being transmitted back...

I am interested in the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector for a 2009 Kia Rondo. One of the issues I see in the reviews is that the green wire from the drivers side to the passenger side can be too short....

What would be best hitch/towing set up to order from you guys for a 07 to 09Rondo V6 with a view to owning a camper trailer? Would a transmission cooler enable higher tow loads? I have not bought the Rondo yet. ..still looking. She will be used...

Hi - I recently received a CURT C11074 Trailer hitch for the 2009 VW Rabbit from a friend who no longer has their MK5 rabbit. Is it possible to purchase *only* the replacement mounting hardware for this specific mount instead of the generic...

Why does the Curt hitch require a strap but Draw Tite and Hidden Hitch do not?Is the Curt weaker or less stable? | Curt recommends the stabilizer strap with non-supported loads like bike racks to help support the hitch when going over bumps...

Installation instructions for this part Curt Trailer hitch indicate that minor fascia trimming is required for installation on a 2008 VW Rabbit. Can you tell me just how much trimming is actually required and if a non-professional will be capable...

need to buy a motorcycle trailer hitch and required accessories. Renting motorcycle trailer from UHaul. I have a 2008 Volkswagen rabbit | For your 2008 VW Rabbit the Curt # C11074 is a fit and is a Class I hitch with a 1-1/4" receiver that...

Hi, I am looking to get a hitch to install a bike rack on my 2007 Rabbit? However, there are 2 types Class 1 1000 lbs and Class 1 2000 lbs which one should I buy? and what is the difference? Would this make a difference in the installation?...

can i tow a trailer with my 08 kia rondo | Yes, you can tow a trailer with your 2008 Kia Rondo. I found a copy of the owner's manual online and found the following towing capacities. First, if the trailer does NOT have brakes models with the...

Will this hitch fit a 2005 VW Rabbit? If Not do you make one? Or what is the difference between 05/06? | The new body style VW Rabbit was introduced to the US as a 2006 model. I do not have a listing for a 2005 VW Rabbit, just a Golf. You...

Im planning to purchase a trailer hitch and wiring harness for my 2007 Kia Rondo. A little confused about whether or not I need a separate converter? | The trailer wiring harnesses that fit your 2007 Kia Rondo like the Tekonsha part # 118431...

I NEED EXACT INSTS FOR INST INCLUDING MUFFLERHEAT SHLD MODS. I AM UNABLE TO DOWNLOAD. 4CYL ENGINE | Installation of hitch # C11031 on your 2009 Kia Rondo would go as follows. 1. Lower exhaust to ease installation. 2. Temporarily remove heat...

can you use a 1 1/4 to 2 inch adapter with this hitch. I want to put a cargo carrier on it to go on a trip to haul a couple of light weight totes approx. 100# | I did some research and found that the towing capacity of your 2008 Kia Rondo is...

I want to buy this part for my Kia Rondo trailer hitch. What Hitch Ball do you recommend I order with it? Mostly need to know the shank length. Thank you, | For a ball with a 1-7/8 inch diameter you would want the Hitch Ball part # C40001...

Does the same hitch fit both the Rondo 4 and the Rondo V6 models? I have the V6 model so I want to be sure of the fit. | Yes, the Curt Trailer Hitch, item # C11031, will fit both the 4 and 6 cylinder models of the 2010 Kia Rondo, so it will...

Can I attach this 3-bike hitch rack to the Draw-Tite Trailer Hitch for Kia Rondo? Can I carry 3 bikes with it? Thanks for helping. | The only hitch available for the Kia Rondo is the Curt Class I hitch, item # C11031. Class I hitches are limited...

will this size carrier fit an 2008 Kia Rondo? | According to my contact at Curt Manufacturing, the U-bolt mounts of the # C18115 cargo basket will accommodate crossbars up to 3 inches wide and 2-1/4 inches tall. If you have cross bars on your...

Does this hitch require trimming of the bumper? | No, installation of the Curt Class I Trailer Hitch, item # 11074, on a 2008 Volkswagen Rabbit does not require trimming of the rear bumper fascia. I have included a link to the installation instructions...