Result:

Articles

Recommended Stabilizer Jacks for a Rpod Trailer

Good afternoon, I have a customer that has a 2022 Rpod and his stabilizer jacks were damaged in a wind storm here in Colorado. He wants heavy duty jacks so on the back, I found 24inch rated a 4500lbs, but on the front, I cant find anything...

What do the Two Sets of Hitch Weight Capacities Mean, Weight Carry and Weight Distributing

I want to tow a 1969 Road Runner 4000 lbs. will this product work with a 2001 GMC Safari Van. I dont understand the weight distribution system and carrying weight. The total combined trailer plus car should weigh about 6000lbs. | The Draw-Tite...

Finding Installer for Curt Hitch on 2009 Kia Rondo

A Curt Trailer Hitch Receiver for a Kia rondo 2009 what car brands aré compatible to install the tráiler Hitch | Hey Adrian, I attached a link to an installer locater that you can use to find someone to install the Curt hitch part # C11031 on...

Looking for Hitch Solution for 2004 Monaco Dynasty Coach

Morning Have a customer looking for a trailer hitch assembly for their 2004 Monaco Dynasty coach Diesel pusher The original hitch appears to have been cut off with a torch Any help on this would be greatly appreciated | Hey Bill, I wish...

Parts Needed to Add Brakes to 1992 Coleman Arcadia Pop-Up Camper

I want to add brakes to my 92 Coleman Arcadia pop-up. I am looking for the correct hub/drum and electric brake assemblies. The wheel bolts are 5 on 4 1/2 and the tires are Carlisle USA Trail 20.5x8-10. The current axle includes a square flange...

Replacement Ceiling Garnish For MaxxAir MaxxFan RV Roof Vent

Can I buy spare parts for this model please? I need the inside decorative trim piece that slides inside the hole. | It sounds like you are looking for the Ceiling Garnish for MaxxAir MaxxFan RV Roof Vent - White # MA54FR. This will slide up...

How is Length of 7-Way Connector Lead Determined for Wiring Up Trailer

Is there a rule of thumb on what length to allow when cutting your Hopkins Wiring H20046, 8 foot 7 pin molded connector. Obviously one would hitch up the trailer , run it to both the female port of the tow vehicle and to the trailers female...

Tire and Wheel Recommendation for a Utility Trailer with P155/80R13 Wheels and Tires Installed

I have a utility trailer that currently has P155 80 R13 tires that i need to replace, not knowing the history of the trailer, If I replace the current passenger tires to the correct Trailer tires, will the trailer tire fit the current passenger...

Hitch Recommendation for a Rockwood Roo Trailer

what is the proper hitch for a rockwood Roo? 4900 lbs 500 lb tougue wt. 2003 Safari | If your Rockwood Roo has a frame width between 24 and 46 inches you would want the Draw-Tite Multi-Fit Hitch, part # 5350. This hitch has a 500 lb tongue...

Mounting Bolt Size of Draw-Tite Hitch for 2005 Chevy Astro or GMC Safari

Hello, I just received my hitch part # 75122... can you tell me what size the mounting bolts are? I need to go grab a tap to clean out the holes on my van frame. Thank you! | Thank you for your purchase of the Draw-Tite Trailer Hitch Receiver...

Recommended Trailer Hitch Receiver for 2011 Kia Rondo

I am looking for a trailer hitch for my KIA Rondo 2011. Do you guys have anything for this models Thanks | For a trailer hitch that fits your 2011 Kia Rondo we have the Draw-Tite Trailer Hitch Receiver # 36525. This is a custom fit Class I...

Trailer Hitch Recommendation for a 2007 Kia Rondo

I am looking for a trailer hitch for a Kia Rondo that was manufactured in Dec, 2006. I dont see one in your listing earlier than 2007. Thank You | That is because you most likely have a model year 2007 Kia Rondo that happened to be built in...

Maximum Tongue Weight for 75122 for 1995 GMC Safari

Can you please tell me the maximum tongue weight capacity of this hitch. Thank you, Steve | The Draw-Tite part # 75122, has a maximum weight carrying towing capacity of 5,000 pounds and maximum tongue weight of 500 pounds. If you utilize...

Identifying Wiring on 1997 GMC Safari

I am preparing to install trailering equipment on a recently-acquired GMC Model M11006 compact van and need some ID help on the stock harness stub in the jack compartment, on which I plan to use one Erich Jäger or two Hopkins powered converter/isolators...