1998  x   >   1964  x   >   1999  x   >   Redarc  x   >  

I have a 1999 superduty F250. I think originally it came with 4 way plug. Had nothing when I got it. I installed a 7 way so all my trailers used same plug. I would like to put a Redarc brake controller and they are plug and play. I took the...

Hello. I have a 1999 Toyota Land Cruiser without the towing package. Im interested in adding the Draw-Tite hitch, Redarc Tow-Pro Elite, and a combined 4/7 pin socket. Im wondering what other parts I will need to get the job done on my Toyota....

I could use this in my 1998 GMC c2500 ? Also what else would I need to make this work in there ? Thanks | To install the Redarc Tow Pro Liberty part # RED24FR in your 1998 GMC C2500 all you need is the correct install harness which is the part...

I JUST PURCHASED A 2022 NISSAN PATHFINDER WITH TRAILER TOWING PACKAGE. I NEED TO PURCHASE A ELECTRIC BRAKE CONTROL UNIT. I DO NOT FIND THIS MODEL ON YOU VEHICLE LIST. VEHICLE CAME WITH A JUMPER CABLE TO PLUG INTO UNDER DASH. Rear bumper mount...

Hi I have a 1999 coachman sportscoach with the freightliner xc chassis. it has a tow hitch and a four prong plug at the hitch. I want to be able to pull a small two horse trailer that has electric brakes- 7 way plug Which products to I need...

Will the redarc 69fr/24fr work with a 4 pin trailer connector? | It will not; a 4-way does not have the necessary components for any brake controller to work. A 7-way is required, so here is exactly what you will need to use the Tow Pro Liberty...

Do you have a 7 pole plug, and wiring harness, that will plug directly into the factory wiring on a 1999 Chevrolet K1500 Suburban? | We do have all the parts you will need to install a 7-way on your 1999 Chevrolet Suburban K1500, unfortunately...

Several other models I was researching shows a harness that plugs from the controller to an existing prebuilt harness that is located beneath the vehicle dash on a 1998 Ford F150. Is there a harness available or an plug that can be added...

Hello. I am needing to upgrade my 99.5 F350 from four flat to seven pin trailer wiring so I can have use of trailer brakes.I currently have Redarc part number RedFR24 In my cart. I am looking to use this with either part number 118243, or part...

i have a 98 dodge ram 1500 if i put a deep cycle battery on my trailer.i hook up a batt cable from the truck batt to an isolator and frm the isolato to the trailer batt will the batt on the trailer maintain the 12 volt charge.i will run a long...

I would like to install a RED44FR on my 1999 Ford E250 which didnt come equipped with a towing package. I have purchased and installed a T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Item # 118344. I have also purchased and...

I am looking at replacing a 1998 Tekonsha brake controller with something newer. The folks at the RV Repair Club suggested your site. I am interested in the Redarc Tow Pro Elite with the mount anywhere controller and remote knob control. ...

Looking brake controller for 1999 gmc sierra classic 1500 with z71 package. Looks square like a 1998 so not sure which way to search. The only 2 options coming up are over $400. Thanks for your help. | For a brake controller on your 1999 GMC...

Hello, I have a 98 Toyota 4runner with a 4 pin connector. Heres what I want to do: 1. install electronic brake controller 2. control all trailer lights 3. charge my rv batteries while driving to the destination. Ideally, I prefer oversized...

I ordered a brake controller which came with a factory plugin harness TPH-006 (RED87FR). When I went to plug into my Ford I noticed that the factory plug on the truck has 5 pins and the harness only has 4 pins. Is this a problem and do I have...

I own since new a 99 Jeep Cherokee XJ w/ factory tow package 7 wire round. I think this vehicle does not have an existing electrical socket for an electric trailer brake controller. Is this correct? | That is correct, the 1999 Jeep Cherokee...