1998  x   >   1964  x   >   !MagnaFlow  x   >   Nissan  x   >  

I want to verify fitment before purchasing. My truck is a 1998 Nissan Frontier 2WD Standard Cab Long Bed. There are no existing holes in frame. I assume that I will need to drill all four holes. Need to make sure that the hitch extends back...

passenger side mirror for 1998 maxima i cut the wire that was connected to the mirror now only driver side window go down not the others window what can it be | It sounds like the wire that was cut serves more than one function or was not the...

will this work on an 1998 Nissan Pathfinder??? | The Class III hitch for your 1998 Nissan Pathfinder would be the Curt Class 3 2-Inch Hitch, part # 13088. I am including a link to the installation instructions on this hitch. The Draw-Tite Class...

what Tow bar is used with #325-1 Roadmaster Cross bar base plates | The Roadmaster Falcon part # RM-520 would fit and work well with the base plate kit part # 325-1 that you referenced. It's perfectly compatible and one of the easiest to use...

I have a 1998 Nissan Frontier4x4 extended cab, 5 speed with neutral in the tranfer case. Will the 327-1 Road Master XL Base Plate Kit work on this Truck and can this truck be flat towed with out hurting the drive train? | I did some checking...

Unfortunately my car is not with me but I want to buy a black wheel cover for my 1998 Nissan Pathfinder and was wonder what size to get | Don't worry, I can still help you figure out which tire cover you need. I did some research and according...

Can my 1998 pathfinder pull a 2002 wildwood 19 ft lite trailer and do I need to install a brake controller? | To determine if your 1998 Nissan Pathfinder can pull the 2002 Wildwood travel trailer you will need to consult the vehicle owners manual...

Will the hitch come with fasteners? Are there any installation videos or instruction sheets available? | The Curt hitch part # C13064 that you referenced comes with all of the hardware needed to install on your 1998 Nissan Frontier. I also attached...

WHICH BULB WILL FITS A 98 Nisson PATHFINDER? | For a 1998 Nissan Pathfinder the reverse lights take an 1156 bulb so for a backup alert you would use # HM20100VA. |

Installed t connector on 1998 Nissan frontier have everything but brake lights | The first thing I would do is test the circuits of the 4-way on the Tow Ready Wiring Harness part # 118362 with a circuit tester like part # PTW2993. This will...

Hi, I have a 1998 Nissan Pathfinder. I was wondering, between the following two hitch receivers, which one sticks out past the rear bumper the LEAST? Curt 13156 round tube vs Curt 13088 square tube The one I have on my Pathfinder currently...

what is the angle for the trailer tongue for part #CA-5400-B | The A-Frame Trailer Coupler - Thumb Latch - Black - 2-5/16" Ball - Weld On - 14,000 lbs # CA-5400-B is designed to fit over the frame of your trailer and sit flat. The angle of...

I have a nissan pathfinder with a 4 pin flat trailer wire. The trailer that I bought has the female end of a 7 pin. the adapter that I have to go from 4 pin to 7 pin has extra wires for trailer brakes and another black one for the hot wire....

I have 4 steel wires. What are they for. | Your Draw-Tite hitch # 75186 that fits your 1998 Nissan Frontier includes among its hardware items four fish wire tools, also called bolt leaders. These are supplied to make it easier to place the carriage...

Do you guys know if this fits the requirements for the 4x8 cargo trailer ? | The Curt Trailer Hitch Receiver # C11261 is a custom-fit Class I hitch with a 1-1/4 inch opening designed to fit the 1998 Nissan 200SX. The Curt hitch is designed to...

What light weight trailer hitch do you recommend for a 1998 Nissan Pathfinder. I am just pulling a boat trailer with a 12 foot aluminum boat on it. Thank you | I recommend installing the Curt Trailer Hitch Receiver # C13156 on your 1998 Nissan...

Will hopkins #48895 work on my 98 nissan frontier | For trailer wiring for your 1998 Nissan Frontier I have a much better solution for you than a universal wiring kit like the part # HM48895 that you referenced. You would want the Tow Ready...

Convenience tabs I noticed this base plate does not have them and Im wondering if they can be added--BX1826 | The Blue Ox Base Plate Kit - Removable Arms # BX1826 for a Nissan Pathfinder do not have the convenience link tabs as you mentioned....

The 13064 trailer hitch wont fit on the the frame of my 1998 Nissan frontier pick up. The alignment is OK but the tailpipe is directly in the way of the hitch mount to the frame. There doesnt seem to be enough play in the pipe if I try to move...

Will this work on a1998nisson frontier | The Curt # C19748 is designed to attach to a steel front bumper but doesn't have a specific fitguide. I looked up pictures of your 1998 Nissan Frontier and found that the upper portion of the bumper...