1998  x   >   !Mighty Cord  x   >   Rampage  x   >   Optronics  x   >  

I am interested in your tow bar #63180 to tow a 1998 Jeep Wrangler. Can this be bolted directly to to the bumper? Thanks. | To flat tow your 1998 Jeep Wrangler, you will first want to install a base plate kit like the Roadmaster EZ4 Base Plate...

Can I make the side marker ligh blink when the turn signal is on? | If you want to make a side marker light blink with the turn signal it will have to be tapped into the turn signal/brake light wire for that side. But then it will also come...

Hello I have a 1998 GMC sierra truck. I currently have a 5 way plug for boat trailer with surg brake I have a trailer 7 pin with electric brakes. What kind of adapter can I uses if any in conjunction with my 5 way plug? | A 5-way to 7-way adapter...

Hello, Can you please offer guidance parts, info, estimated cost, etc. to set up towing of a 1998 Jeep Wrangler TJ Sport, 6cyl, 5 speed manual, 4x4, behind a 2017 motor home with Ford E-450 chassis, 6.8L, V-10? Thank You Very Much. | To flat...

I only seem to find the left hand light. Do you hve the right hand? Or are they universal. JIM | We do offer the right hand version of the # ST57RB light. Part # ST56RS would feature the same functions as the left tail light, but does not...

If I want to tow my Jeep Cherokee Sport 1998 with my 2012 Pleasureway RV claas B do I have to buy a braking system to be legal? | Virtually all U.S. states and Canadian provinces require that a towed vehicle be equipped with a supplemental braking...

I have a 1998 Honda Accord with the Roadmaster 1541-1 base . Will this tow bar hook directly to my car | The Roadmaster XL base plate kit # 1541-1 does not fit your 1998 Accord but the similar kit # 1545-1 does fit, and with it you can use the...

Hello I am restoring a 1973 Hunter Compact 2 and always get my stuff from you guys...I was wondering how these lights come apart? does the lenses come off and the electronics remain inside? or are the LEDs and board attached to lense? I want...

I would like to pull my 1998 Jeep wrangler behind my 2007 Fleet Wood motor home, with my jeep lights plugged in. I'm using a flat 4 connector, will this Block diode work, or will I need more than one? And how would I wire it in? | The Hopkins...

Which Aries Grille Guard brackets hardware will mount with 1998 Jeep Wrangler? | Aries doesn't offer a Grille Guard for a 1998 Wrangler, so there wouldn't be a bracket kit either. Not only are the brackets vehicle specific, but the grille guards...

I have gone through and wired up my trailer with two truck lite 60 two tail lights in the rear and a couple amber turn signals on the sides. Using a four wire harness, dielectric grease, auto connectors, shrink wrap, etc. Everything works as...

I need a new light bulb, what item do i need? | It looks like you are are using Optronics 7 function trailer light # ST9RB, which you referenced. The replacement bulb for this light is # A1157B. The Optronics replacement bulb, # A1157B , is...

I need brackets for the tail lights in the tl5rk kit. Im not sure witch ones fit. Thank you. | The Optronics Trailer Light Kit # TL5RK that you referenced does not include mounting brackets for the two tail light assemblies since these lights...

trailer light STL603RB mounting hardware do you sell what it takes to mount the lights. | Yes! In order to mount the Light Guide LED Trailer Tail Light part # STL603RB you are going to want to use the Rubber Grommet for 4" Round Trailer Tail...

I have a 98 Ram pickup with all incandescent lights. Added hitch accessory with LED lights. The tail lights work on truck and acc., but the turn signals will not work on truck or acc. Will I have to change the truck bulbs? Or add a capacitor...

REF RA98815. I would like to review printed installations before we purchase. Please advise. | I attached the install instructions to this page for you to checkout for the Rampage Replacement Soft Top Fabric for Suzuki # RA98815. |

I am looking for an oval amber clearance marker light with two bulbs and one wire. I have found item MC66AB which is the correct size but with 2 wires. Any help would be greatly appreciated. Thanks. | The difference between a clearance light...

Good Day I have a 1998 Jayco Eagle UD10 Pop up camping trailer and I need to replace the back red taillights. The Information that is on the broken taillights is as follows top center it states Westbar the number on taillight is SAE-AIPCRST-96-DOT...

I have an aluminum flatbed on my pickup. The taillights/brake lights are 6inch oval incandescent. If I switch to LED do I need to install resistors to avoid rapid flashing? | Yes, when switching to LED taillights on a vehicle that will be...

Do these hinges have new bushing installed? | The Rampage Lower Door Hinge Bracket Kit for Jeep # RA7607 includes the two hinges and mounting hardware but not bushings. |

will this fit my 1998 pontiac Trans am thats not a WS6? Does the hood style matter? Mine is not the Ram Air version. | Yes, the Rampage cover part # RA1304 that you referenced is a confirmed fit for your 1998 Pontiac Trans Am NON-WS6. Yours...

Could you tell me the measurements from mounting-hole-center to mounting-hole-center? Thanks. | The distance between the mounting hole centers of the GloLight LED Trailer Tail Light # STL201RFMB that you referenced is 4-1/4 inches. |

have 2 year oid box trailer with led lights everything works as should behind my 2015 Ram hook it to my 2004 Fleetwood mtr home only have marker lites on sides and top no tailites, start motorhome and marker lites go out with running lites...

What size mounting hole for the Optronics A91 rubber mount for marker light? | The Optronics Grommet # A91GB that you referenced, which is designed to work with the Thinline LED # AL91RB that you were looking at, will install into a mounting...