Replaces the torque knob used to tighten your Inno roof rack feet or ski and snowboard rack. Fits Inno roof rack feet (INXS200, XS201, XS250, and XS400) or Inno Dual Angle ski and snowboard rack (INUK729).Features: Replaces the torque knob used to tighten your Inno roof rack feet or ski and snowboard rack Fits Inno roof rack feet (INXS200, XS201, XS250, and XS400) or Inno Dual Angle ski and snowboard rack (INUK729) Fits: Inno roof rack feet: INXS200, XS201, XS250, and XS400 Inno Dual Angle ski and snowboard rack: INUK729
... Ratcheting straps connect over boat or boards and tighten with integrated hand knobs to secure gear. Crossbar pads included. Easy, clamp-on installation.There are 2 long straps that stretch over your cargo and secure to 2 short straps. The straps are tightened in place with ratcheting knobs. When transporting a kayak or canoe, load the boat onto your crossbars first. Then connect the straps over the boat - securing the wire looms on the ends of the short straps to the hooks on the ends of the long straps - and tighten them with the hand knobs.
... Ratcheting straps connect over boat or boards and tighten with integrated hand knobs to secure gear. Mounts with included hardware into T-slots in tops of crossbars.There are 2 long straps that stretch over your cargo and secure to 2 short straps. The straps are tightened in place with ratcheting knobs. When transporting a kayak or canoe, load the boat onto your crossbars first. Then connect the straps over the boat - securing the wire looms on the ends of the short straps to the hooks on the ends of the long straps - and tighten them with the hand knobs.
This locking carrier lets you transport 3 shortboard or 2 longboard surfboards on your roof rack. Ratcheting straps connect over boards and tighten with hand knobs. Integrated pads on carrier protect boards. Easy, clamp-on installation.The carrier is easy to load and use with integrated straps and ratcheting hand knobs. Adjustable pads on the straps and rubber padding on the carrier base protect your boards during transport. The Locker installs easily with clamp-on hardware.
This post-style carrier lets you safely transport 2 kayaks on your roof rack. Padded upright arms support kayaks during transport, and they fold down when not in use. Space-saving carrier clamps to most crossbars without tools. Tie-downs included.The cradles mount to your crossbars with hand knobs and brackets. Set the cradles in position on top of the crossbars and hold the mounting brackets in place under the crossbars. Thread the knob bolts through the top of the cradles and into the mounting brackets below the bars.
Saddle-style cradles let you safely transport 1 kayak on your roof rack crossbars. Rubber-padded cradles securely grip your boat's hull, and they're easy to load from the side of your vehicle. Tool-free installation. Tie-down straps included.Adjust the cradles until your kayak is stable, then tighten the knobs until the lower plates are parallel to the cradles.
These feet let you mount 2 Inno square crossbars to your vehicle's rain gutters. Feet clamp onto rain gutters and tighten down with hand knobs. Feet provide 5-1/2" of load bar clearance above the roof of your vehicle.Locking Covers A telescoping hand knob on each foot secures the system to your rain gutters. With the hooks and covers installed, turn the hand knobs to tighten the feet on your roof.
These feet let you mount 2 Inno square crossbars to your vehicle's rain gutters. Feet clamp onto rain gutters and tighten down with locking knobs built into the covers. Feet provide 7-1/2" of load bar clearance above your roof.The feet clamp onto your rain gutters and tighten down with integrated hand knobs. The knob covers can be locked with keys to secure the system to your roof. And these extra-tall feet provide extended clearance above your roof.
These feet let you mount 2 Inno square crossbars to your vehicle's rain gutters. Feet clamp onto rain gutters and tighten down with locking knobs built into the covers. Feet provide 9-7/8" of load bar clearance above your domed roof.The feet clamp onto your rain gutters and tighten down with integrated hand knobs. The knob covers can be locked with keys to secure the system to your roof. And these extra-tall feet provide extended clearance for your vehicle with a domed roof.
These durable, pivoting feet help you mount 2 Inno square crossbars to your vehicle's naked roof. Torque-control knob prevents overtighting. Locks and keys included. Tool-free installation.Features: 4 Feet let you mount Inno square crossbars on your vehicle's naked roof Pair with 2 crossbars and a custom fit kit (sold separately) to create a complete roof rack Bases pivot to ensure crossbars are level on your roof Locking torque knobs secure system to your roof 2 Keys included Durable, weather-resistant AES plastic construction Tool-free installation and removal - no drilling required Torque knobs prevent over- and under-tightening Black color Specs: Stay height: 3-7/8" Weight capacity: 132 lbs Always observe your vehicle's maximum roof load capacity Limited lifetime warranty
These Through feet help you mount 2 Inno Aero crossbars to your vehicle's factory fixed mounting points to create an extended-length roof rack. Hand knobs tighten feet in place on your roof. Locking covers secure system to roof.Features: 4 Feet let you mount Inno Aero crossbars on your vehicle's factory fixed mounting points Pair with 2 crossbars and a custom fit kit (sold separately) to create a complete roof rack Through design helps create an extended-length roof rack that maximizes carrying capacity Mounting brackets secure to vehicle's fixed mounting points Fit kit hooks anchor feet to mounting brackets Integrated hand knobs tighten hooks on mounting brackets Locking leg covers secure system to your roof - includes 2 keys Durable, weather-resistant AES plastic construction Easy, slide-on installation to channels in bottoms of crossbars Snap-on covers protect mounting brackets when feet are removed Specs: Weight capacity: 165 lbs Always observe your vehicle's maximum roof load capacity Limited lifetime warranty
These Through feet help you mount 2 Inno Aero crossbars to your vehicle's factory flush side rails to create an extended-length roof rack. Hand knobs tighten feet in place on rails. Locking covers secure system to roof.Features: 4 Feet let you mount Inno Aero crossbars on your vehicle's factory flush side rails Pair with 2 crossbars and a custom fit kit (sold separately) to create a complete roof rack Through design helps create an extended-length roof rack that maximizes carrying capacity Integrated hand knobs secure feet to your roof Easy, slide-on installation to channels in bottoms of crossbars Locking covers secure system to your roof - includes 2 keys Durable, weather-resistant AES plastic construction Specs: Weight capacity: 165 lbs Always observe your vehicle's maximum roof load capacity Limited lifetime warranty
These Flush feet help you mount 2 Inno Aero crossbars to your vehicle's naked roof to create a roof rack with a streamlined look. Hand knobs tighten feet in place on your roof. Locking covers secure system to roof.Features: 4 Feet let you mount Inno Aero crossbars on your vehicle's naked roof Pair with 2 crossbars and a custom fit kit (sold separately) to create a complete roof rack Flush design helps create a rack with a streamlined, from-the-factory look - bars don't extend past feet Integrated hand knobs secure feet to your roof Easy, slide-on installation to channels in bottoms of crossbars Locking covers secure system to your roof Also secure T-slot-mounted accessories to your crossbars 2 Keys included Durable, weather-resistant AES plastic construction Specs: Weight capacity: 165 lbs Always observe your vehicle's maximum roof load capacity Limited lifetime warranty
These Flush feet help you mount 2 Inno Aero crossbars to your vehicle's factory flush side rails to create a roof rack with a streamlined look. Hand knobs tighten feet in place on rails. Locking covers secure system to roof.Features: 4 Feet let you mount Inno Aero crossbars on your vehicle's factory flush side rails Pair with 2 crossbars and a custom fit kit (sold separately) to create a complete roof rack Flush design helps create a rack with a streamlined, from-the-factory look - bars don't extend past feet Integrated hand knobs secure feet to your roof Easy, slide-on installation to channels in bottoms of crossbars Locking covers secure system to your roof Also secure T-slot-mounted accessories to your crossbars 2 Keys included Durable, weather-resistant AES plastic construction Specs: Weight capacity: 165 lbs Always observe your vehicle's maximum roof load capacity Limited lifetime warranty
These Flush feet help you mount 2 Inno Aero crossbars to your vehicle's factory fixed mounting points to create a streamlined roof rack. Hand knobs tighten feet in place on your roof. Locking covers secure system to roof.Features: 4 Feet let you mount Inno Aero crossbars on your vehicle's factory fixed mounting points Pair with 2 crossbars and a custom fit kit (sold separately) to create a complete roof rack Flush design helps create a rack with a streamlined, from-the-factory look - bars don't extend past feet Mounting brackets secure to vehicle's fixed mounting points Fit kit hooks anchor feet to mounting brackets Integrated hand knobs tighten hooks on mounting brackets Locking leg covers secure system to your roof Also secure T-slot-mounted accessories to your crossbars 2 Keys included Durable, weather-resistant AES plastic construction Easy, slide-on installation to channels in bottoms of crossbars Snap-on covers protect mounting brackets when feet are removed Specs: Weight capacity: 165 lbs Always observe your vehicle's maximum roof load capacity Limited lifetime warranty
... Installs to square bar or 2" round bars. Apply tension using a hand knob, as well as a torque bar, drive socket, or wrench. 1,500 lbs Max load.Features: Heavy-duty tie-down lets you secure ladders, siding, pipes, and other cargo to your truck bed ladder rack Designed to work on square bar racks and 2" round bar racks - hardware not included Position anywhere along the rack's crossbars Sturdy ratchet uses adjustable hand knob helps you maintain maximum tension on the strap Works with included 5/16" torque bar, as well as a 3/8" drive socket or 3/4" wrench for additional tensioning on ratchet mechanism Double-J hook securely connects to anchor points Built-in anchor point on frame allows hassle-free connection Adjustable D-ring on strap provides a custom anchor point Unique packaging doubles as an adapter for 2" round bars Mountable holder included for torque bar Durable steel construction with black powder coat resists corrosion Sturdy yellow polyester webbing Permanently mounts to your ladder rack Specs: Quantity: 1 top-loader strap Application: square and 2" round ladder rack tubing Dimensions: Strap: 8' long x 1-1/2" wide Bracket: 5" wide x 1-3/4" long x 1-11/16" tall Safe working load limit (WLL): 500 lbs Maximum load (break strength): 1,500 lbs Note: Tie-down straps must be chosen according to their safe working load limit (WLL).
This lift assist allows a single person to easily load a kayak onto a roof rack. Swing-out arm holds your boat upright - away from your vehicle - as you load it, and it stores on your crossbars when not in use. Easy, clamp-on installation.Thread the mounting bracket onto the ends of the bolts - under the crossbar - and secure it in place with hand knobs. Simple, One-Person Loading The swing-out arm lets a single person easily load a boat onto the roof of a vehicle. To load, rotate the arm out and away from the base bar on the side of your vehicle.
Adapter lets you mount a roof rack on your vehicle's short or curved naked roof. Easy installation with components from your existing Inno roof rack for naked roofs.Then clamp the feet to your roof with a custom fit kit. To complete installation, tighten the knobs to secure the kit to your roof.
8' Long ratcheting, top-loading tie-down strap lets you secure large, heavy cargo to your ladder rack. Double J-hooks and D-ring secure strap to anchor. Multiple methods of tensioning make it easy to tighten down the strap. 1,500 lbs Max load.Features: Heavy-duty tie-down strap helps secure cargo to your ladder rack Sturdy ratchet helps you achieve and maintain maximum tension on the strap Knob and included 5/16" bar allow for tightening Additionally, you can provide tension with a 3/8" drive socket or 3/4" wrench Double J-hook securely connects to anchor point on mounting bracket Adjustable D-ring lets you customize anchor points Mounts to ladder roof racks (hardware not included) Packaging includes a 2" round pipe bracket adapter for rounded roof racks 2 Built-in attachment points allow hassle-free connection Large release lever allows easy operation Zinc-plated housing for corrosion resistance Durable polyester webbing Specs: Quantity: 1 top-loader strap Dimensions: 8' long x 1-1/2" wide Safe working load limit (WLL): 500 lbs Maximum load (break strength): 1,500 lbs Note: Tie-down straps should always be chosen according to their safe working load limit (WLL).
Filters
