Search: Door Seal   >   RV Toilets   >  

We have a very similar entry door lock with the Bauer Products Camper Door Lock #BA65FR. The configuration appears to be very similar to the lock on your 2004 Featherlight horse trailer. The Bauer lock is made to fit a cutout 5-1/4" wide x…

You are correct and the linkage does need to be replaced. For that you would want the part #LC379160 which matches what you have. My contact at Lippert technical confirmed that two washers, not four, are supplied with the Kwikee Step Gear/Linkage…

Our Bauer door lock part #BA64FR is the same as the BP-12 that you mentioned so this will work great.

We do have the BP 12 ETP you are looking for with the part #BA64FR.

The #CB250D96SHD is designed to work with trailer ramp doors that open from the top and when fully opened create a ramp used for loading the trailer. The brackets that are attached to the door are typically placed at the top of the door(top of door…

I reached out to Valterra for the dimensions of the Valterra RV Toilet Floor Gasket with Hold Down Bolts #Q23653VP, and they sent me the accompanying dimensional diagram. It has an outer diameter of 4-3/4", an inner diameter of 3-1/4" and…

Replacement Dometic toilet floor flanges are universal. But you need to determine the threading of your current flange. They will work with 3 inch pipes. The two options are below: The Replacement RV Toilet Floor Flange - 3 inch MPT #T05-0782…

The best option we have for you is the Continuous Stainless Steel Hinge part #SH300. This hinge is 6' long, 3" wide, and has 1" long knuckles. The overall length of the hinge will be an exact fit but the width will be about 1/4"…

Thank you for the photo. We may have a few replacement seal options for your Seal on 2001 SnoPro Clamshell Enclosed Trailer but you'll need to confirm the dimensions we have will work for what you're needing. The Rubber Large Half Round Seal…

Thank you for the detailed photo, it was a great help. The latches are actually not designed to fit the thickness of the door so you could use whichever size would allow the pin to catch in the door lip. f you were able to make it so the door did not…

We do have a bunch of seals available for you, however to find out exactly what you need for your RV, you'll need to cut a section off of your existing seal, and measure the width and height, well as measure the entire area you need to replace.…

If you the 3-3/16" overall length matches what you currently have on your 2016 Grand Design Reflection 313RLTS then the Rubber Wiper Seal and Bulb for RV Slide Out #SR98FR will work just fine. With that being said, if you want something that…