Durable steel ball has a 1" diameter x 3" long shank. Built-in wrench flats ease installation. Chrome finish resists corrosion. Fine threads provide strong grip. Lock washer and nut included.Features: Hitch ball provides a connection point for your trailer's coupler Fine threads provide exceptionally tight, strong grip Durable steel construction Corrosion-resistant chrome finish
Replaces the ball on your Curt friction-style sway control system (17200). Also works with Curt sway tab ball mount (D320) or weld-on sway tab (C45822).Features: Replaces the ball on your Curt friction-style sway control system (17200) Also compatible with Curt sway tab ball mount (D320) or weld-on sway tab (C45822) Attaches to sway control tab
It is typical to have approximately 1/2 inch of space between the bottom of the bumper and the axle. Removing the spacer will help to improve the ride quality. With the spacer gone, the distance increases to 1-1/2 inches, and will improve ride…
For the front tie-down, you'd use the Torklift #TLD2140. The rear tie-down will depend on whether you have the factory hitch or a TorkLift Super Magnum hitch installed. If you have the factory hitch, use #TLD3113 for the rear, or if you have…
Yes the Timbren Rear Suspension Enhancement #TDR2500D you were looking at for your 2018 Ram 2500 will fit perfectly. They will be slightly compressed with your Titan 50 Gallon Fuel Tank full, but that is to be expected as that is quite a bit of…
The aluminum TorkLift Talon Camper Tie-Downs #TL94FR that would fit your 2022 Ram 2500 will not fit with the running boards that you have. With how these mount the running boards have to end with the cab and can not extend past it at all. If you…
I reached out to Roadmaster who said the plate is 5-1/4" from the inside of the upright on the Spare Tire Carrier #RM-2000-7. Your 235/65R18 tire has a width of 9.3" and the 51mm offset is approximately 2" off the center giving you…
The Draw Tite hitch pat #24897 is a Class I hitch which has the weld stop in the tube that prevents Class II hitch accessories from fitting. So what you really need to do is determine if the accessories you have are Class I compatible or not. If they…
Yes, we do. I have exactly what you are looking for. It is the Spare Tire and Wheel for Roadmaster Tow Dolly - ST205/75R14 Radial item #RM-200330-80. This is a 14" diameter x 6" wide rim with a 5 on 4-1/2" bolt pattern and a…
There are spare tire carrier options for your trailer that can accommodate your wheel and tire size, but the RoadMaster Spare Tire Carrier #RM-2000-7 that you referenced is designed to be used on Roadmaster Tow Bars and can only accommodate wheel…
The mounting plate of the Spare Tire Carrier for Roadmaster Tow Dollies #RM-2000-7 that you referenced measure 3 inches apart left to right and 3-1/2 inches apart front to back. It's designed to fit 3 inch frame.
The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…
I can help you choose between the Kuat Sherpa 2.0 and Kuat Transfer V2, as both are really nice bike racks. Let me start off, since you mentioned 3-bike rack, if that's what you were after you would need the Kuat Transfer V2 Bike Rack for 3 Bikes…
When installing the Draw-Tite Class I Receiver Hitch #24897 on your 2017 Ford Fusion Energi (along with the other hitch models available for this vehicle) you will indeed want to trim the rear fascia instead of removing it completely in order to…
My order is still in transit, but I cant believe how fast these guys got it packed up and on its way. Im tracking it and I should have it sometime tommorow.I placed my order around 8pm Monday, Ill get it Thursday.
Filter Results
