Search: Anti Sway Hitch Pin   >   !Locks   >   Front Receiver Hitch   >  

The Draw Tite hitch pat #24897 is a Class I hitch which has the weld stop in the tube that prevents Class II hitch accessories from fitting. So what you really need to do is determine if the accessories you have are Class I compatible or not. If…

For the front tie-down, you'd use the Torklift #TLD2140. The rear tie-down will depend on whether you have the factory hitch or a TorkLift Super Magnum hitch installed. If you have the factory hitch, use #TLD3113 for the rear, or if you have…

It is typical to have approximately 1/2 inch of space between the bottom of the bumper and the axle. Removing the spacer will help to improve the ride quality. With the spacer gone, the distance increases to 1-1/2 inches, and will improve ride…

Yes the Timbren Rear Suspension Enhancement #TDR2500D you were looking at for your 2018 Ram 2500 will fit perfectly. They will be slightly compressed with your Titan 50 Gallon Fuel Tank full, but that is to be expected as that is quite a bit of…

I reached out to Roadmaster who said the plate is 5-1/4" from the inside of the upright on the Spare Tire Carrier #RM-2000-7. Your 235/65R18 tire has a width of 9.3" and the 51mm offset is approximately 2" off the center giving you…

I can help you choose between the Kuat Sherpa 2.0 and Kuat Transfer V2, as both are really nice bike racks. Let me start off, since you mentioned 3-bike rack, if that's what you were after you would need the Kuat Transfer V2 Bike Rack for 3 Bikes…

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

Yes, we do. I have exactly what you are looking for. It is the Spare Tire and Wheel for Roadmaster Tow Dolly - ST205/75R14 Radial item #RM-200330-80. This is a 14" diameter x 6" wide rim with a 5 on 4-1/2" bolt pattern and a…

When installing the Draw-Tite Class I Receiver Hitch #24897 on your 2017 Ford Fusion Energi (along with the other hitch models available for this vehicle) you will indeed want to trim the rear fascia instead of removing it completely in order to…

The trailer hitch I recommend for a 2023 Hyundai Tucson is the Curt Trailer Hitch Receiver part #C94WR which I confirmed as a fit with Curt for all models, including the Hybrid. This trailer hitch features a bolt-on installation so there is no…

For a 2022 Chevrolet Colorado you only flat tow four-wheel-drive vehicles that have an N (Neutral) and a Four-Wheel Drive Low (4 (n) setting. Look for knob on the dashboard. This will most likely be the last position on the right of the knob and be…

Yes you can do whatever you want to the Flint Hill Goods 22" x 49" Hitch Mounted Aluminum Cargo Carrier #FHG59ZR once it's yours but modifying it is not going to be covered by the 90-day warranty so if you accidently break it while…