Is Platform of Andersen Adjustable Ball Mount Lockable
Question, can I put a lockable pin where adjusting is being done? Second question, say I only use a 2” ball can I get just the 2” ball without the other ball? Thanks | We have a lock kit that will give the Andersen Adjustable ball mount part...
Can I Use a Weigh Safe Ball Mount with a Weight Distribution Hitch
I am looking at this WD/Sway hitch and need to know if I can use my Weigh Safe Wsun-3 2-5/16in Universal Tow Ball no Clam Shell with it. | No. You cannot use a Weigh Safe ball mount like the # WS4-2 with a weight distribution hitch like the...
Best Way To Gain Tailgate Clearance With Electric Trailer Jack
Can you remove the four sockethead screws and rotate the motor assembly 180 degrees to get more clearance to allow lowering the tailgate? | There are other ways to help gain tailgate clearance, but disassembling the electric jack # 3370093500...
Is There A Weigh Safe 180 Ball Mount Available With A 1-7/8" Ball For A 3" Hitch
180 Hitch 2-Ball Mount w/ Stainless Balls - 3inch Hitch - 8inch , 8inch Rise - 21K Item # LTB8-3 Is there an 17/8 ball size option for this hitch. | I do have another option available that will suit your needs, but we currently do not offer...
Which Ball Mount Needed for 20111 Silverado with 3-1/2 Inch Lift
Question recently bought a truck with 3.5 lift want to buy a trailer hitch that fits my camper hitch with stabilizer s on it any recommendations | The hitch height of a truck can vary widely according to the tire sized used and the presence...
Hitch Lock Recommendation for 2 Receiver with Hitch Receiver Cover
Which lock is good for the 2inch spurs texas hitch cover for a 2019 toyota tacoma TRD sport? | I have the perfect solution to secure your Spurs Hitch Receiver Cover # HTCC2223 and any other receiver mounted accessories you may want to secure;...
Ground Clearance Dimension for 180 Hitch 2-Ball Mount w/ Stainless Steel Balls # LTB8-2
21.5inch receiver hitch height. With this ball mount set at max of 8inch using the 2inch ball, clearance between the 2 5/16inch ball to the ground? | If you had the Weigh Safe Ball Mount # LTB8-2 in the max drop position with the 2-5/16 inch...
Adjustable Ball Mount Recommendation with 1-7/8 inch and 2 inch Hitch Ball
Hi, I want to buy a fastway E ball mount. Do you have dual ball mount 1-7/8 - 2 available? | Fastway no longer has a dual ball mount with the two hitch ball sizes you are looking for but we do have the 180 Hitch Dual Ball Mount part # WS54FR...
Can I Use the Weigh Safe WSUN-1 with a Curt Rebellion XD Ball Mount
Can this hitch be used with the weigh safe ball? | I may have a solution for you, but the Curt Rebellion XD Shock-Absorbing Adjustable Ball Mount - 2" Hitch - 6-1/4" Drop - 15K # C45949 has a 1-1/4" shank diameter for hitch balls; the Weigh...
Is There All Chrome Version of B and W Tow n Stow Ball Mount for 3 inch Hitch
Does the 3 ball 71/2 3 in receiver come in all chrome. 2120 dodge ram 3500 dually | There isn't an all chrome version of the B and W Tow n Stow part # BWTS30049B. The closest option since there isn't anything all chrome for the 3 inch hitch...
Fighting Sway From Wind With Light Weight Enclosed Cargo Trailer
I just purchased a new Interstate 6foot x 12foot enclosed cargo trailer my first trailer ever. Im trying to get educated about safety. Its a single Dexter axle, with brakes and the Tekonsha P2 brake controller installed in the truck. Pulling...
Recommended 2-1/2 Inch Adjustable Ball Mount for Use with Hitch Mounted Mud Flaps
Getting ready to order a set of the 10100713 Rockstar mud flaps to go on a 2018 F450. Plan to order the Access part #A810089 so it will mount to a 2 1/2inch ball mount. Finally I want to purchase an aluminum 2 1/2inch adjustable ball mount,...
Locking Hitch Pin For B&W Tow & Stow 2-Ball Mount # BWTS30040B
Do you have a set of locking pins for your product #BWTS30040B? I can only find the Infinite Rule pins #IR57FR which are only meant for the 14,000 B and W Tow and Stow, not rated for the 21,000 B and W. | The B&W Tow & Stow 2-Ball Mount, #...
Recommended Rock Tamer Mud Flaps for a 2020 Chevy Silverado 2500
I want to use the Rock Tamers on my 2020 Chevy Silverado 2500, will they work? Also, will they interfere with the back-up sensor? | The correct Rock Tamer Mud Flaps for a 2020 Chevrolet Silverado 2500 is part # ERT00108 for 2" hitch receivers...
Recommended 7 Way Trailer Connection to Fit a 2009 Porsche Cayenne
I have a 2009 Porsche Cayenne which came with the factory installed trailer hitch but does not have the seven connector female plug-in. It has a block off plate secured by four screws. Apparently US customers are supposed to purchase the appropriate...
How to Choose Correct Ball Mount for 2017 Ram 2500
I recently purchased a 2017 Ram 2500 that has a class v hitch. I noticed it is considerably higher than my previous 1500. I was wondering how much of a I need when purchasing a ball mount. From some the reviews I read, I saw a picture and...
Ball Mount Recommendation for a 2016 Ford F-350 with 2-1/2 Inch Trailer Hitch
I have a 2016 Ford F350 diesel with a 2 1/2 inch receiver. My main trailer I will be towing is a 3 horse slant with a empty weight close to 4000 pounds. The measurement from level ground to the bottom edge of the trailer coupler is 17 1/2...
Towing a Jeep on a Car Hauler with my 2002 Silverado 2500 HD do I need WD?
I will be towing a jeep on a car hauler in my 2002 silverado 2500 hd. My tow ball is rated at 6000 pounds. My jeep weighs around 4500 not including the trailer. Will that be safe or will I need a ball thats rated for more weight? | All towing...
Ball Mount with 8-Inches of Drop for Use in 2-1/2-Inch Hitch
I need a 2.5inch ball mount with an 8inch drop. Im towing a 3500# 24foot enclosed cargo trailer. Probably total weight loaded is 5000#. Can you recommend a safe and proper product for me? Thank you! | We can offer you a choice of fixed and...
Reducer Sleeve Needed for Diversi-Tech 2
I have a Diversi-Tech 2 inch ball mount with a 2.5 inch sleeve i used in my Denali. I recently bought a Ford F350 which is a 3 inch sleeve. Is there a sleeve that I could use to make the hitch work for me? Currently, I am using the 2.5 inch...
Adjustable Ball Mount with a 2-1/2 Inch Shank and 2 Balls
Does this item have a 2-1/2 inch shank or does it have a sleeve? | Adjustable ball mount # DTSTBM6625 has a fixed sleeve. I have tired to take one off before and they just do not come off. It isn't welded but it is very much stuck on there making...
Options For Reducing Sag While Hauling A Camper On A 2010 Toyota 4Runner
Ive recently purchased a 2016 Forest River 206STSE pop up camper and am towing it with a 2010 4runner LTD. I dont have any issues with pulling or braking, but its sagging and Id like to correct this for optimal towing. Is there a WD system that...
Overall Height of the 180 Hitch 2-Ball Mount w/ Stainless Balls # LTB10-25
What is the overall height of this hitch? Also, I am comparing this hitch with the fastway FA42-00-2925. Which one will have less rattle at the ball to ball mount connection, and ball mount to drilled shank? I understand I would be better off...
Heavy-Duty Tow Package for a 2009 Chevrolet Express 1500
I have a 2009 chevy express 1500 AWD. i cannot find any distinction in the wiring differences between the 2wd vs AWD are they the same? i am looking to put the curt class 4 hitch on, and i will need a 7 pin iring with trailer brake controler....
Filter Your Search
Contact and Help