!mercury  x   >   !Road Glide  x   >   !Jeep  x   >   Brophy  x   >  

Can you recommend an anti-rattle device to use with this Flash self-locking aluminum ball mount? Also: is a 2inch hitch ball available in stainless -steel to fit this ball mount? My vehicle is a 2014 VW Touareg TDI with factory 2inch hitch...

I have an old Hollywood bike rack model SE2-A. It is configured with a 2 draw bar. Is there an option I can purchase separately to replace the 2 draw bar with a 1.25 draw bar? Thanks in advance. | Unfortunately that 1-1/4 inch shank is not available...

The bike rack does not have enough clearance to be used on my Jeep. | It looks like you ordered the Swagman XC 2-Bike Rack, part # S64650, and it's not clearing your Jeep well. You can always look at exchanging bike racks, but I believe I have...

Bought a 2016 C max and need a hitch for my bike rack. Its 2 inches, a platform style. I love it and want to keep using it. This Curt hitch is 1.25. Would i get a connector to make them work together? Excuse my ignorance! Thank you! | You...

Are there any max weight specs for this reducer- tongue weight/trailer GVW? | The short answer to this question is- No. The B&W Hitch Receiver Reducer Sleeve # BWRHXA2182 does not reduce the tongue weight or towing capacity of your hitch in...

What is the outside diameter of the female part of the mount. I have a bike rack that requires a male fitting | The outside diameter of the receiver portion for the Hitch Extender for Brophy Hitch-Mounted Stairs # RHSE is about 2-1/2" while...

Can I use brophy mounts to mount my Hallmark slide in camper and use in an off road scenario? This whole be going on a 2022 Nissan Frontier SV. Thanks! | You'll need to take a few measurements to ensure that the Brophy Clamp On Camper Tie-Downs...

Do you carry a hitch adapter that would fit into the female end of a stock two inch 2007 Toyota Tacoma, and convert to one and a quarter female? I have a nice bike rack I am trying to utilize. Thanks | To reduce your 2007 Toyota Tacoma's factory...

The folding hand rail thats for camper scissor stairs. Will it mount on the left. | The Stromberg Carlson Rail Mate # AP-101 is intended for left hand mount. All 3 Brophy Handrails # AHR3 for 3-step scissor steps, # AHR4 for 4-step, and #...

I have a 2016 Honda Accord 4DR Sport with a 1 1/4inch hitch. I also have a 2inch Cart Caddie in which it scrapes the road when pulling out of the driveway and beach access points. So, I would like to know if you make a 1 1/4inch Hitch Riser...

Does the classic bed require a different clamp assembly, Give list recommended clamps and tie downs for this combination Thanks, Mike | According to my contact at CR Brophy, the # TDSF stake pocket camper tie down isn't compatible with your...

I would like to fit a Thule Apex XT Swing on my 2021 Outback with OEM hitch shallow hitch. Is there an extension mechanism I can use for this hitch? | We can take some measurements to see if a hitch extension is even necessary for your 2021...

Do you guys sell a trailer hitch for a 2017 Nissan Marano that is an inch and a quarter? I see plenty of 2 inches but I don’t see an inch and a quarter and the problem is I have an inch and a quarter on my Forrester so I want to try to keep...

Hi Im trying to find an 1 1/4 to 1 1/4 riser for my Yakima bike rack it hangs to far out and frequently drags. I want something that rises immediately upon exit of hitch. I dont know why I cant find one, tons of options in 2 Any ideas? Thanks!...

Hello, will the HSAB TIE DOWNS work with 2020 Toyota Tundra 8 ft bed? | The Brophy Clamp On Camper Tie-Downs part # HSAB are universal tie-downs used to secure a truck bed camper to a truck bed. They are universal because the manufacturer does...

This brand seems to be the only one with ratings for weight distribution. Why don’t any of the others allow this? In one of the QandA for the 18in equalizer shank it specifically says not to use WD with a hitch extender. I have a Tundra and...

I have seen photos of these steps on a fox landing, however, my fox Landing is 19” wide and this says the step bracket is 21.5” wide. Will this step work on the fox landing? | Given that the mount of the Torklift # TLA7844 is 2-1/2 inches wider...

Im trying to install a trailer hitch for my 2009 ford mustang. my bike rack is for 2 inch opening, I only see a 1 1/4 inch hitch. do you any hitch that would fir my bike rack? | There are not currently any 2 inch hitches available for a 2009...

I see the 7 inch extender which will probably work for me. I really only need 4 - 6. Are there shorter ones available less than 7? Thanks, | The Brophy 7" Hitch Extender for 2" Hitch Receivers # HE06 is the shortest hitch extender that's...

Will these fit a 2016 F-250 2WD? | The Brophy Clamp On Camper Tie-Downs part # HSAB are a fit for a 2016 Ford F-250 so long as you have a SRW model. If you have a DRW model then you'll need to use a set of frame mounted camper tie-downs from...

Because I have a S250g shelter like the one th as t you have a picture that a person into you ? Why I am asking is would like to know if I need j31 or the j41 . Thank you | I would be happy to help! The only difference between the Brophy Cable...

i have a Kia soul 2010. i want a hitch for my car so i can use my yakima 2 bike rack. The only hitch i found to fit my vehicle is part # 11110, but this only has a 1 1/4 opening. Do you sell an adapter that will work? | There are adapters available...

I am considering purchasing this item. The fact that it is extra long raises a question for me. Does using this item reduce the weight capacity of the hitch being used? I refer you to the use of extenders that are available that clearly indicate...

My wife has a 2013 Chevy Captiva with Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 Item # 75556 installed. We have a carrier for her medical scooterpicture attached. The holes on both the hitch receiver and the carrier...