Recommended Roof Rack And Kayak Carrier For 2015 Chrysler Town And Country
Have a 2015 Chrylser TandC with factory stow and place roof rack. The crossbars are low and seem low quality. Im hauling 2 kayaks and my Malone staxpro2 does not fit factory crossbars. Got anything better and more durable that will screw...
Compatibility of Lippert SolidStep RV Step Assemblies
Will the Lippert Solid Step work on a Cross Roads 2012 Sunset Trail Reserve? The closer for the door is threshold mounted only allowing door to open 90 degrees unlike most doors that swing 180 degrees. | The fit of RV steps such as the Lippert...
Hitch Pin Hole to Bumper Dimension for Curt Hitch part # C12264
on a chrysler 2014 town and country with stow and go, what is the clearance from the center of the hitch hole or pin hole to clear the bumper for a bike rack? For a Curt 1.25inch trailer hitch | The distance from the center of the hitch pin...
How To Find Correct Bearing Kit for CrossRoads Sunset Trail Travel Trailer
I have a 2012 sun set reserve 33 ft travel trailer. Im looking for rear axle wheel bearing kit. gvwr 9275.00lb.Thanks | In order to choose the correct replacement wheel bearing kit for a CrossRoads Sunset Trail Travel Trailer you'll need to...
Replacing 25-1/2 Long Leaf Springs on 2009 Crossroads Sunset Trail
my trailer is a 2009 crossroads sunset trail. my tires rube on the fender well sometimes and the trailer rides very low. I measured the leaf spring with the weight of the vehicle on it and it was 26, I jacked the tire off the ground and it...
What Vehicles Does the Curt Hitch part # 13364 Fit
what years do the trailer hitch for a 2013 town and country fit | The Curt Hitch part # 13364 that has been confirmed to fit your 2013 Chrysler Town and Country fits the following vehicles: 2012 - 2014 Dodge CV 2012 - 2015 Ram CV 2008 - 2015...
Is there a Maximum Ceiling Height for the Thule MultiLift Cargo Lift and Storage System
My garage has 13foot ceilings because I have an auto lift. Im trying to find out if this hoist will work with my ceiling height. I didnt see anywhere that this was mentioned. | I checked with Thule and the max length from the mounting surface...
Recommended Hitch Mounted Bike Rack for 2006 Chrysler Town and Country
Is there a 3 bike rack to fit my vehicle that doesnt have the upper arm with foam protector go on the window ??! 2006 Chrysler town and country | All of the trunk mounted 3 bike racks for your 2006 Chrysler Town and Country will have an upper...
50mm Ball and Getting Lights to Work on Altera Strada DL3 Bike Rack on 2016 Chrysler Town & Country
I have brought to the US my beloved Atera Strada DL3 bike rack and need a Euro-style ball mount 50mm - 1 7/8 to fit a 2 trailer hitch receiver. I am not sure though what lift I will need. Please advise. ALSO - if you can suggest the best...
Tongue Weight Capacity for Pintle Hook part # C48004
I saw an expert say that the rated tongue weight of a Pintle hitch is 1/4 the total GWR. 5000 LBS Is there a class of hitch that can handle that kind of tongue weight? | For the applications that we normally deal with we don't have a trailer...
Will Dexter Nev-R-Adjust Electric Brake Assemblies # 23-468 & # 23-469 Work w/ Axeltek Brake Drums
My existing rig has a 3500lb axle with Axletek brakes. The Axeltek drums are 10inch dia x 2.25 wide. Can I replace the Axeltek manual adjusting brakes with the Dexter never adjust and utilize the existing Axeltek brake drums. The existing drums...
Installation Sockets Needed for 2016 Chrysler Town and Country Draw-Tite Trailer Hitch Installation
2:42 on video What is the socket size for the 3 bolts holding the exhaust system? 4:45 on video When tightening the 5 bolts on the hitch, what is the correct torque setting? 75579 Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit -...
Cover For Crossroads Sunset Trail 210FK Travel Trailer
I have a sunset trail 210fk camper. What storage cover will fit correctly since it has a sloped front end. The standard square front covers do not fit correctly and loose in the front. | We do have a cover that will fit your Crossroads Sunset...
How to Pick Out Replacement Bearings and Seal for a Camper Trailer Hub
Do you know what wheel bearing and grease seals are need for a 2002 Coleman Cheyenne popup camper? Thanks, | To pick out bearings for a trailer hub you will need to remove one of the hubs so that you can remove the bearings and get the numbers...
Filter Your Search
Contact and Help