Yaris x > F-100, F-150, F-250, F-350 x >

Compatability of Receiver Hitch with Eagle Lift Gate on 1989 Ford F-250 4 x 4

I have an eagle lift-gate on my 1989 F-250 4x4. What is the measurement from the bottom of the frame to the top of the receiving tube for this model 41004? | I contacted Draw-Tite about the Class III Max-E-Loader Trailer Hitch, item # 41004....

Function and Installation of the Pulse Preventer for my 1990 Motorhome

I have a 1990 motorhome on an Oshkosh chassis with basically Ford Electrical system. I have a problem with my electric brakes, pulsating when hooked up to my motorhome and I use my 4-way hazard signals. Will this pulse preventor eliminate this...

Replacement Rear Step Bumper For 1982 Ford F100 Pickup Truck

Do you have a rear chrome stepbumper for a 1982 Ford F100 Flareside. They are different than a styleside. Thank you | I checked with our vendor Westin and confirmed that the only rear bumpers available for a 1982 Ford F100 are the ones listed...

Hitch that Fits 1977 Ford F-250 with Narrower Frame

Ive got a 1977 Ford F-250 4x4 and my frame is narrow, I do not want to drill any holes as well | Sounds like you have a cab and chassis model Ford F-250 which has frame dimensions of 34 inches measured from outside to outside which we have hitches...

Trimming or Removing Metal Air Deflectors on 2007 Toyota Yaris to Install Roadmaster Base Plate Kit

Have 2007 Yaris, 2 door hatchback. I’m purchased this kit and reading the instructions. Step 20: before installing the main receiver brace trim or remove the metal air deflector on each side. If trimming use the yellow marker...I’m not clear...

Availability Of 2-5/16" Hitch Ball with 1-1/4" Diameter Shank That Is At Least 3" Long

I am looking for any ball hitch. But one needs to be 2 5/16 inche size with a shank width of 1 1/4 inches and a shank length of 3 inches. And I need the same hitch in 1 7/8 inch. I have been looking for a while and haven’t seen any with a long...

Replacement Axle for 1993 Western World Tandem Axle Trailer

I am working on a 1993 western world tandem axle trailer. the customer hit a guard rail and bent the front axle/spindle assy. do you guys sell the axle /spindle assy ? I didnt see one here on the website. please reply. thank you. | We do...

Westin Fey Diamondstep Bumper that Fits 1979 Ford F-150

I have a 1979 Ford F150. I need a Westin Fey diamond step bumper part number 71000. What installation kit do I need and do you have the bumper in stock for immediate shipping? | Westin has a Fey bumper and hardware kit that fits your 1979...

Roof Rack and Kayak Carrier Recommendation for 2014 Toyota Yaris with Naked Roof

Recommendations re a means to carry a large kayak atop a 2014 Toyota Yaris 3 door hatchback with naked roof? | The first thing you'll need on your 2014 Toyota Yaris is a roof rack to carry a kayak carrier. The best value for that is the Inno...

Availability Of Replacement Tarp In Grey For A TruXedo TruXport

OK I have1979 f250 styleside 8foot I installed truxport w/grey cover. Can you make one for replacement in grey. its the type soft rollup with bars ed and raised on edge 15 degrees 13/4 original design the original hardware is all good the covr...

Rail Kit to Allow Use of Gooseneck Hitch Adapter in 1975 Ford F-250 Long Bed Pickup

Can I install a goose neck hitch below bed? 1975 Ford F250 8 foot bed | We do not have any under-bed gooseneck hitches for your 1975 Ford F-250 long bed but we do have a way for you to tow a gooseneck trailer. You can start with an above-bed...

Recommended Trailer Hitch Compatible with 1968 Ford Truck

Will the Draw-Tite - FORD VANB.Y - 75315 model hitch fit on a 1968 Ford truck..? | The Draw-Tite 75315 hitch has been discontinued, but is only a fit for Ford Full Size Vans. It will not fit a Ford Truck. For your 1968 Ford Truck, I recommend...

Recommendation of a Base Plate Kit and Tow Bar for Towing a Toyota Yaris

Do you have a Tow-bar that will allow me to tow a Toyota Yaris 3 door hatchback? | If your Toyota Yaris is a 2007, 2008 or 2009 model then you can use the Roadmaster EZ Base Plate Kit, item # 521181-5. If your Yaris is a 2006 model the Roadmaster...

Recommended Circuit Breaker and Wire Gauge for Wiring 7-way Trailer Connector

I have a 1979 f350 crewcab that I have just built a gooseneck hitch for.I am now wiring the 7 pin plug in the bumper and the 7 pin plug in the bed to a junction box at the rear of the truck.My question is about running the wire for the battery...

Thread Pitch for the Replacement Hub Clamp Bolt for Rock Tamers

what is the thread pitch of this bolt?? | The thread pitch for the Replacement Hub Clamp Bolt for Rock Tamers Heavy-Duty, Adjustable Mud Flap System item # ERT052 is 15. I have attached a diagram I made with a couple more dimensions related...

Curt Trailer Hitch Fit Recommendation for 2008 Toyota Yaris Hatchback

I have a 2008 Yaris 4 door liftback/hatchback..need the hitch receiver and i see only the sedan or 2 door hatchback listed. Please advise the proper model...thanks | I checked with Curt and they list their hitch part # C11480 as a confirmed...

Availability of Trailer Hitch Receiver for 2018 Yaris Hatchback SE

Hi, Any hitch model available for this trim. Except SE was market for this one. Thanks | If you have a 2018 Toyota Yaris SE 3-Door (aka 2 door) Hatchback then the Curt # C11480 trailer hitch receiver will fit your vehicle. If it is the SE 5-Door...

What Trailer Hitch Is Available For A 2008 Toyota Yaris Hatchback

Have a hitch for a Yaris 2008 Hatch back? | I have three hitches available for a 2008 Toyota Yaris Hatchback. They are all Class I 1-1/4 inch hitches and are rated at 2000 lbs. towing weight capacity with 200 lbs. tongue weight capacity. The...

Side to Side Measurements for B&W Class V Trailer Hitch # BWHDRH25122

Hello, What is the width including mounting tabs and what is the distance between the bolts, center to center, frame rail to frame rail? I need a class 5 hitch for a 1967 F350 dump truck. If the width on this doesnt work, do you have a recommendation? Thank...