Recommended Kat's Heaters Engine Block Heater For A 2017 Toyota Yaris iA
Will this heater work on my 2017 Yaris IA. Hole to block is located fron drivers side | Yes, the Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts # KH11813 is a confirmed fit for your 2017 Toyota Yaris iA 1.5L...
Tow Bar Lighting Recommendation for a 2010 Yaris Hatchback
Good Morning: My Yaris has separate turn singles from my brake lights, my motor home uses the same bulb fro brake and turn signal. I think that means I need the six diode kit? Also do you have a kit that would charge my Yaris battery from...
Front Hitch for 1986 Ford F-350
Will this hitch fit the front of my 86 F350 2 wheel drive, crew cab dually ? | The B&W Heavy-Duty Trailer Hitch # BWHDRH25122 that you referenced is confirmed to fit your 1986 Ford F-350 Dually, but it's designed to install onto the frame...
Is There an Airbag Kit that Fits 1991 F250 with Fifth Wheel Rails
I came across a 1991 F250 4wd Lariat in awesome condition and want to use it mainly for pulling a couple of trailers. Is there any air bag kits that will work with a Fifth wheel hitch?? Thanks | The Air Lift air spring kit part # AL88298 fits...
How Does Draw-Tite 2-1/2 Inch Trailer Hitch Install on a 1988 Ford F-250
I do not have the holes on the bottom side of the fam. | Drilling is required to install Draw-Tite trailer hitch # DT45502 on a 1988 Ford F-250. You will need to drill eight 1/2 inch holes to secure the hitch to the bottom of the vehicle frame....
Selecting a Bolt-On/Non-Weld Trailer Hitch Receiver For a 1990 Ford F-Series Super Duty Truck.
Can I order a hitch without the drilled holes in frame or a detailed description of where I need holes drilled. Trying to get a non weld on hitch for a 90 f-superduty | First we will need to determine which style F-Series Super Duty your 1990...
Will Draw-Tite Trailer Hitch # 75038 Fit a 1989 Ford F-150 Regular Cab, Short Bed
Will this receiver fit on an 89 f150 standard cab, short bed? | If your 1989 Ford F-150 has a standard or step bumper AND the frame measures 37-1/4 inches from left to right (outside to outside) then you can use trailer hitch # 75038. If your...
Installation Differences Between Curt, Draw-Tite and Hidden Hitch Models for 2010 Toyota Yaris
I notice this hitch costs more than Draw-Tite hitch. Is it easier to install? I know some of the comments say the other 2 hitches attachment points have two upper bolt locations that are difficult to get to. | After looking over the installation...
7-Way Trailer Wiring Solution that Fits 1991 Ford F-350
I have a 1991 f350, I currently have the 5 pin t connector that hooks up to the factory wire harness underneath. So now im trying to get a 7 pin connector on my truck, and I am having a bit of a hard time trying to find the right one, although...
Does Tow Ready Trailer Wiring Harness # 118517 Require a Battery Connection on a 2009 Toyota Yaris
For the T-One Vehicle Wiring Harness with 4 Pole Trailer Connector - 2009 Toyota Yaris does a line have to be run to the battery? Thank you | The installation instructions for the Tow Ready Wiring harness, # 118517, are correct. The power...
Torklift Front Tie Down for 1991 Ford F-250 4x4 Long Bed without Running Boards
Is TLF 2000 the correct tie down for a 1991 F250 4x4 Long bed super cab no running boards? | Yes, the Torklift front tie down part # TLF2000 is the correct front tie down for your 1991 Ford F-250 long bed, 4x4, super cab, without running boards. |
Do Highland or WeatherTech Floor Mats for a 2007 Toyota Yaris Hatchback Have Grommets
Do these floor mats have grommets for the driver side? | I spoke with my contact at Highland, the manufacturer of Floor Mats, # 46021, and she stated that there is no grommets on the 46021 mats for your 2007 Toyota Yaris. I made a call to...
What is WD TW - I understand the TW stands for tongue weight, but what is the WD? I am looking at the Curt Class V hitch and this is one of its designations. | Correct! TW stands for tongue weight and WD stands for Weight Distribution. I have...
Adding Side Marker Lights to Open Utility Trailer
are you allowed to add more side marker lights to a open utility trailer | Yes, side marker lights can be added to your open utility trailer. When adding these lights you will just need to make sure that you do not exceed the amp rating of the...
How Does Draw Tite Hitch for 1986 Ford F-350 Install
looking at a hitch for an 1986 f350 dually. all these options appear to mount on TOP of the frame, vs in the factory location where the bolts go thru the side of the frame. perhaps your descriptions are a bit off or the photos of the hitches...
Are Buyers Products Parts Made in the USA
Is this one made in the USA? If not do you sell a comparable one made in the US? Can you give me a list of any other pintle hitches you sell with the same bolt pattern as this one? Thanks | I'm happy to inform you that all Buyers Products engineering,...
Are Thule Xsporter Pro Crossbars Compatible with a Side Load Assist?
Is the Rhino Rack Universal Side Loader bar compatible with the Thule Xsporter Pro Cross Bars? Thanks for your help! | The Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack - Aluminum - 450 lbs - Silver # TH500XT has load bars that...
Draw Tite Hitch Recommendation for 1990 Ford F-150
How wide of frame will this fit on? For a 1990 F150 XLT 4x4 300CI | For your 1990 Ford F-150 the Draw Tite hitch part # 41004 is a confirmed fit and would work well. There would be no need to measure your frame width. |
When Should the TorkLift SuperHitch Original Trailer Hitch Receiver Be Used on a 1987 Ford F-250
Is the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2inch Receivers - TLF1000inch my best option for a heavy duty hitch for everyday use, but will eventually put a camper on the truck? I would also like...
Economically Priced Fifth Wheel Hitch and Rail Kit Recommendation for 1985 Ford F-150
Got 1985 f150 need any can of hitch thats cheap to pull it home | For a economically priced hitch the Reese fifth wheel hitch part # RP30047 can be used in your 1985 Ford F-150 with the universal rail kit # RP30035 installed in your truck bed. |
Recommended Front Mounted Trailer Hitch For A 1984 Ford F-150
I have a 1984 Ford F-150 four-wheel drive I need a front hitch cannot seem to find it. Maybe the back hitch will also fit the front?? Please help me out. | For your 1984 Ford F-150 I recommend the Draw-Tite Ultra Frame Service Body Trailer...
Using Yakima HoldUp Bike Rack, Part # Y02445 on 2009 Toyota Yaris with Class I Hitch
I drive a 2009 Toyota Yaris 2-door hatchback. I would like to use the Yakima Holdup with 1.25 hitch mount to transport one bike approximately 25 pounds. Can the Holdup be used with a Class I hitch the only size available for my car? Thank you...
Trailer Hitch for 2012 Yaris SE Recommendation
As per QandA and research hitch that fits normal Yariss doesnt fit SE model https://www.etrailer.com/vm/Toyota+/Yaris/hitch QandA response from Adam R. Can anyone provide an explanation on why it doesnt fit the SE model? | Curt has indicated...
Brake Controller Does Not Work with Hazard Lights on a 1987 Ford F-350
Ive had this truck with the 5504 controller for over a decade with no issues. A few years in there I was pulling a trailer daily with no problems to report. The past few years the truck hasnt seen much use so I dont know if that may be a factor....
Filter Your Search
Contact and Help