No Brake Lights when Towing New Wheelchair Trailer With 2007 Chrysler 300 Wiring # 118404
Connected my new Wheelchair trailer all LED and found no brake lights. Disconnected trailer and tested the harness flat plug coming from the car. I have power for running lights, turn signals and 4-ways but no power for brake lights. Tested...
Best Tire Chain Recommendation for Tire Size 245/45-20 for 2019 Chrysler 300
My wife drives a 2019 Chrysler 300 Touring L Rear Wheel Drive Sedan. Tires are 245*45*20 inch rims. The OEM tires are Firestone Firehawk GT model of that size but also can use OEM Firehawk AS in that size. WHICH SELF-TIGHTENING set of chains...
What E-Bike Carrier Do You Recommend For 2013 Itasca Navion iQ Motorhome And A Toyota 4Runner
Mark S answered my previous question but a follow- up, please. I think the Yakima will be too heavy for me to move between my vehicles. Is there a lighter weight carrier available? Maybe Saris Superclamp HD which I think is out of stock everywhere??...
What is the Best Trailer Hitch and Wiring for a 2014 Chrysler 300 Base Model with 3.6 Liter Motor
Does this product fit the Chrysler 300 Base model, year 2014, 3.6 L engine | Yes, Curt trailer hitch # C13093 fits all models of the 2014 Chrysler 300 including the base models. If you plan on doing some towing you might be interested in etrailer...
Measuring for Trailer Hitch Receiver Ground Clearance on a 2013 Chrysler 300
I am looking at either the Drawtite 76145 or Curt C13093 receiver for my 2013 Chrysler 300. It appears that the receiver clearance from the ground is more on the Drawtite than the Curt. I couldnt find any specific dimensions from the frame...
Can a Pro Series 5th Wheel Head Be Used With a RBW Lil Rocker 5th Wheel Base
I like to go to more locking head than the little rocker side bar action, will this bolt on my excisting square bar a frames, my center to center pin is 20.5 inches. | I would love to help but the RBW Lil Rocker 5th Wheel Hitch is made by RBW...
Bike Rack for E-Bikes With Fenders & Step-Through Frame on Motorhome
I am trying to make the right decision regarding a back rack for our 2 Blix Vika folding bikes. Our RV has a rear slide out so I would like a rack that tilts. The videos I see for Swagman or KUAT racks show the locking system attaching to...
Trailer Hitch Receiver Fit For 2012 Chrysler 300
Chrysler 300 2012 .Need a hitch | We can help you out with a trailer hitch receiver for your 2012 Chrysler 300, and there is one option for you that I recommend, which is a hitch from Draw-Tite: - Draw-Tite Max-Frame Trailer Hitch Receiver...
Compatible Trailer Hitch Receiver For A 2019 Chrysler 300 Limited
is trailer hitch receiver 76145 correct 2019 chrysler 300 limited | Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76145 is a confirmed fit for your 2019 Chrysler 300 Limited. This hitch has an easy, bolt-on...
Cargo Carrier And Hitch For 2011 Chrysler 300 To Carry Folding Wheelchair
You have some nice stuff but there is an item I do not see. I need to transport a closed wheelchair that is just to hard for the women in our lives my son and I to put in the trunk. I am looking at your hitch for my wifes 2011 Chrysler 300...
Does The Draw-Tite Trailer Hitch Receiver # 36336 Require All 4 Drivers Bolt Holes To Be Used?
Hello, in my 2005 ES330, there appears with one hole already drilled on the driver side rear frame with a black plastic cover. Do I need to drill another hole? In the video, the last hole was left open without a bolt. Is it safe to have only...
Converter For Motorhome With Separate Turn/Brake Signals to Combined Towed Vehicle Signals
I have a 2008 Navion IQ on a 2007 Sprinter Chassis with the Winnebago installed 6 pin round trailer adapter, which has separate circuits for turn signals and brakes. I want to convert this for a tow vehicle with 4 pins. Do you have a solution...
What is Tongue Weight Capacity of Draw Tite Hitch 76145
I was wondering if the draw tight Max frame trailer hitch would support a 400 lb power wheelchair on the rear of a 2014 Chrysler 300. | The Draw Tite hitch part # 76145 that you referenced which fits your 2014 Chrysler 300 does have a 675 lb...
How To Identify The Transmission Return Line on the 2005 Chrysler 300 2.7L For a Derale Cooler
I have a 2005 Chrysler 300 2.7l Can’t figure out which transmission cooler line is the return | I find the best way to verify what transmission cooler line is the return is by using a TireMinder Infrared Thermometer # TM48FR. This will ensure...
How to Use Roof Top Tent with 2014 Chrysler 300
Want to put this rack on a 2014 Chrysler 300S, what would go up there is a roof nest/basically a tent. I’m 340lbs man, and an concerns of the weight capacity. Y01156,Y00146,Y03541 | I have a way for you to transport and use a roof top tent,...
Does Tekonsha Trailer Wiring Harness 118658 Fit 2019 Chrysler 300C
Is the 118658 tekonsha T-one connector assembly a fit for a 2019 Chrysler 300Ch | I checked with Tekonsha and they list the trailer wiring harness part # 118658 as a confirmed fit for all models of the 2019 Chrysler 300 so that would also include...
Distance Between Bolt Holes On Draw-Tite Hitch for a 2018 Chrysler 300
Trailer hitch for 2018 Chrysler 300 Limited What is the measurements inside frame Center to Center | In regards to the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76145 which is a confirmed fit for a 2018 Chrysler 300 (All Models), the...
Fixed 2" Ball Mount w/ 10-3/4" Rise and 12" Drop
Do u carry a hitch similar in dimensions to the AMSC12 | Yes, we do carry multiple hitches, ball mounts, that are similar to the Convert-A-Ball Ball Mount for 2" Hitches item # AMSC12 you were looking at. The closest comparable product would...
Will DeeZee Universal-Fit, Brite-Tread Mud Flaps, # DZ1808 Fit a 2008 Chrysler 300 without Drilling
Hello to everyone! Will this product fit on Chrysler 300 208 and do we have drill for the installation? | The DeeZee Universal-Fit, Brite-Tread Mud Flaps, # DZ1808, are a universal fit item so fit guide information for specific vehicles is not...
3 Bike Platform Bike Rack Recommendation for 2007 Chrysler 300
I am looking for a hitch mount platform bike rack that can hold three bikes. I have a 2007 Chrysler 300. Can you recommend a product for my needs? Thanks! | For a 3-bike platform rack the Kuat Transfer part # KU24FR would be a great option....
Is the Four Pin Brake Controller Connector Installed Under the Dash on All 2004 Ford Explorers
The instructions say this connector will plug in to the mating factory under-dash mounted connector on 2000-08 Ford Explorers. Is that factory connector on all those vehicles or just ones with special towing packages? I have a 2004 Explorer....
How to Determine Which Ball Mount Will Have Enough Rise for Curt Hitch on a 2005 Chrysler 300c
So I am considering the curt class III hitch #13465 for my 2005 Chrysler 300c. I have seen a previously answered question suggesting the #d-26 ball mount would be recommended to clear the rear bumper. I notice that the D-26 has a lift of 3/4...
Will a Trailer Hitch Mount Bike Rack Affect Park Assist Sensors on a 2012 Chrysler 300s
I have park assist sensors in the rear bumper and would the hitch mount bike carrier interfere with the sensor activity? | It is likely that anything mounted in Curt trailer hitch # C13093 would set off the park assist sensors on your 2012...
Availability of a Folding Cargo Carrier To Fit a 2008 Chrysler 300 and Carry a 19 By 40 Inch Scooter
Which of the folding cargo carriers will fit a Chrysler 300 when folded? The handicap scooter I want haul is 19 inches wide and 40 inches long. Thank you | The closest match for your 2008 Chrysler 300 that we have is the Draw-Tite Hitch Cargo...
Filter Your Search
Contact and Help