Fit of Curt #12064 on Challenger SXT V6 2015
Hi! Can you provide a picture of the Curt #12064 installed on a 2015 Dodge Challenger? The new rear bumper fascia is different, and I hope it look similar to the Charger 2014. Thank you for your help | I spoke with my Curt representative about...
Ball Shank Diameter, Rise, Drop, and Length of the Ball Mount that Comes with Trailer Hitch # 12240
what is the rise/ height? | The ball mount that comes with the Curt Trailer Hitch, # 12240, has a rise of 2-5/8 inches and a drop of 3-1/4 inches. Its overall length is 7-1/4 inches. It accepts a ball with a 3/4 inch diameter shank. I have...
Will the Magnaflow Cat-Back part # MF15123 Cause Issues with the MDS Of a 2013 Dodge Challenger
2013 dodge challenger rt. with automatic transmission. Fuel saver kicks in and out at speeds under 40mph . Dealer states exhaust system is the problem and suggest removing it! They further states tht without back pressure the EGR valve is...
Trailer Hitch Receiver For 2015 Dodge Challenger
Can I put a hitch on a 2015 Dodge Challenger | Yes, you can absolutely put a trailer hitch receiver on a 2015 Dodge Challenger, and what you will need is a hitch from Curt: - Curt Trailer Hitch Receiver # C13236 This is a Class III hitch with...
Heavy Gauge Wiring For Lighting Functions on Trailer
Looking for a heavy wire gauge, 4-prong trailer wire connector set about 16 foot long. This will go on a simple open 3-rail motorcycle trailer. Im tired of the cheap flimsy Chinese wire sets always corroding from the inside out. Any help would...
WeatherTech Side Window Rain Deflectors for 2019 Thor Synergy 24SK Motorhome
I have a 2019 Thor Synergy 24SK motorhome. will these fit it or do you have something else that would fit. I also would like to get a bug shield/wind deflector, do you have one that will fit? | For your 2019 Thor Synergy 24SK motorhome, the...
Which Hitch and Bike Rack Should I Get To Carry E-Bikes On My 2014 Dodge Challenger?
I have a 2014 Dodge Challenger with a aftermarket Borla exhaust. Im looking into getting a E-bike that weighs approximately 50lbs and need a hitch and rack that would accommodate the weight of 1 E-bike and 1 regular bike. Im worried about ground...
How Much Clearance From Hitch Pin Hole on Patriot Hitches Adjustable Drop Hitch Receiver.
Hi, I have a 2018 dodge challenger I already installed a hitch but now I need a riser of at least 10. I am looking at this one item # ph67sr. My only concern is if it will clear past the bumper on my car. | You will want to measure the distance...
Is Trimming or Cutting Required to Install Draw-Tite Trailer Hitch 36548 on a 2012 Dodge Challenger
is there any cutting needed on the bumper or under the car, to instll this? | I have included a link to the installation instructions for the Draw-Tite trailer hitch # 36548. There is no mention of having to cut, trim, or drill anything for...
Can Rear Diffusers be Kept When Installing Trailer Hitch on 2020 Dodge Challenger
I have rear diffusers mounted is it possible to keep this with this hitch ? There are 5 I would give up the middle one thanks | Thanks for the photo, and the rear diffusers on your 2020 Dodge Challenger would have to be removed in order to install...
Wireless LED Tow Bar Light with Magnetic Base
So I dont use any of my cars wiring the lights will automatically work wireless and can make the brakes , signal.s And tail lights work Or am I reading it wrong | The Custer Wireless LED Tow Bar Light with Magnetic Base, # LIW-LDTL is a wireless...
Will the MagnaFlow Catalytic Converter Set for a 2010 Dodge Challenger SRT8 Cause Engine Light
Will these catalytic converters cause a check engine light on my 2010 SRT8 Challenger 6.1? | The MagnaFlow Stainless Steel Catalytic Converter Set part # MF16420 which is a fit for a 2010 Dodge Challenger SRT8 will not cause any check engine...
Is It Normal for Brake Lights Instead of Turn Signals to Flash When Using Hazards With Converter
Hi. I buy the Curt 2 to 3 wires converter to separate turn and brake lights on a Dodge Challenger 2017 and it works good. But when i turn on the warning signals, it blinks the brake lights instead the turn lights. There is a way to solve this...
Draw-Tite Class III Max Frame Receiver Hitch & 2018 Dodge Challenger
I have a 2018 challenger 392. I was looking to get the Draw-tote trailer hitch but I would like to know what else I may need to be fully ready to tow a trailer. This is a side note but I’m looking to get a bushwhacker plus 15fk. Dry: 1900 lbs...
What Types of Jacks do the Bulldog Powered Jack Motor Kits Fit
I have a goose-neck trailer with two 10000lb capacity jacks the jack on the right has the 2 speed gear box mounted on the right side between the trailer frame and jack. will I need to get into the two speed gear box to install the powered-Drive...
Locating Replacement Hardware For Trailer Hitch Receiver For a 2012 Dodge Challenger
Looking for the trailer hitch mounting hardware kit ,for a 2012 Dodge Challenger. Ty | First you will need to verify the exact receiver you have for your 2012 Dodge Challenger. I have listed the different receivers we carry below. Once you have...
Part Needed to Separate Brake Lights and Turn Signal in 2010 Dodge Challenger
Hello, I have a 2010 dodge challenger. I want to separate Brake and turn lights. You have any diagram With wire colors, and witch Parts i need it? Thank you | The Vehicle to Vehicle Tail Light Converter # C56196 will allow you to separate your...
Power and Muffler Style MagnaFlow Cat Back Exhaust for a 2013 Dodge Challenger with 5.7 Liter Hemi
will my stock catalitic converters rob any of the extra power with this system. and are the resonators on this system piped straight through. what kind of real gains in hp and torque can i expect with this system on my 5.7 | A MagnaFlow cat-back...
Replacement Jack for Lippert Level Up Hydraulic System on Gulf Stream Friendship
Can you tell me if the LC26FR is a direct swap part for the passenger side rear Hydraulic Leveling Jack of my 2004 Gulf Stream Friendship G7? | As long as your 2004 Gulf Stream Friendship G7 has the Lippert Level Up Hydraulic leveling system...
Recommendations for Carrying 3 Bikes with a 2010 Dodge Challenger
I have a 2010 Dodge Challenger I need a 3 bike rack. I cant find my model on your list. Do you have one with locks for my vehicle?? Thank You, | I do have a solution that would allow you to carry 3 bikes with your 2010 Dodge Challenger, but...
Troubleshooting Turn Signals That Do Not Keep Flashing
Purchased a Curt 55534 wiring harness. Was easy to install but the turn signals on the vehicle and trailer only flashing 3 times then quit flashing they still have the flashing arrow on dash | If your turn signals work at first and then stop,...
Recommended Hitch for a Bike Rack on a 2010 Dodge Challenger
Hello, Im planning a new bike rack system for my car. I would like to go with a Kuat Serpa 2.0 bike rack mounted to a Curt 2 Hitch #13465. I dont have the hitch installed, so I cant take measurements to verify proper rack to bumper spacing. Can...
Can a Manual MaxxFan Roof Vent Be Converted to a Powered Unit?
Hello. Are there replacement parts that we can change our manual open, 12 V Maxxair ceiling fan 11 to a powered lift with remote? | Unfortunately there is not a kit that that'll convert your manual opening MaxxFan roof vent to a powered roof...
Recommended Trailer Hitch For 2019 Dodge Challenger Towing Light Trailer
Hello, I am going to be in drag week 2020. With drag racing weight and time is an issue so I wont be able to take the hitch on and off. What are the dry weights of the curt c13236 and c12064? I am pulling a trailer less than 1800# so the pull...
Filter Your Search
Contact and Help