Recommended Option to Carry Bikes and Skis on 2008 Land Rover LR2 HSE
I am looking for a better way to haul my bikes and ski/snowboard equipment around. The bikes are a bigger deal to me, but I might be open to something different if it would allow me to also haul my skis and or snowboard during the winter. I...
Distance Between Hitch Pin Hole and Rear Bumper When # C13052 is Installed on 2011 Land Rover LR2
hello, i plan to purchase the referenced hitch from you for my LR2 and also want to buy a folding cargo basket, but am not sure I will be able to fold it up. Can you tell me what the dimension is from the center of the pin to the rear face...
How to Fit a Bike Rack for a 2 inch Hitch Receiver on My 2013 Land Rover LR2 with a 1-1/4 inch Hitch
Im looking for a 1.25inch to 2inch adapter for a class II hitch on my 2013 Land Rover LR2. I need this to accommodate my bike rack, which requires a 2inch receiver. Unfortunately, I cannot find an adapter that fits. The problems is that I need...
Parts Needed to Install 7-Way Trailer Connector on 2008 Land Rover LR2
Hi, I would like to know what wire to buy to install on my Land Rover LR2 2008. Your finder tool tells me to get a 4-way flat connector, but the trailer I want to connect is a 7-way connector. Do you sell 7-way connectors for the LR2? | To install...
Is the European Style to 4 way Flat 118710 Considered a 12N connector
Hello, Im looking at your item number 118710. Is the 7 pin European connection it uses the same as a 12N 7 pin connection? | Yes. The Trailer Connector Adapter for Land Rover - 7-Way, Round Pin, European Style to 4-Way Flat # 118710 is considered...
Distance From Hitch Pin Hole to Sleeve of Hitch Extender e68YR
What is the distance from the hitch side hole to the sleeve? | The distance from the hitch pin hole to the sleeve is 2 inches for the Trailer Hitch Extender for 1-1/4" Trailer Hitch Receivers - 7" Long # e68YR. |
Adding a 7-Way Trailer Connector and Brake Controller to a 2008 Land Rover LR2
Im curious about what mods to make to my 08 Land Rover LR2 to get an electric brake hookup to work. Our LR2 came with a 4 prong wiring harness and we have been told that to hook up a 7 prong requires splicing and that the splicing will set...
Availability of 13-Pin to 4-Pin Adapter for a 2008 Land Rover Configured for European Standards
Hello, I have a 2008 Land Rover LR2 with a standard European 13-pin trailer light hook-up. Now back in the states, Id like to get a 13 to 4-pin adapter without having to do a complete rewire. Is there such an adapter out there? Thanks!...
Is Bulldog Winch Custom ATV Winch Mount Compatible with Other Brands?
2014 Kawasaki Teryx4 800LE Can I use this mounting bracket with a Badlands 5000lb winch? Got the winch for my birthday and really dont want to have to return it. | For your 2014 Kawasaki Teryx4 800LE the Bulldog Winch Custom-Fit Steel ATV Winch...
Recommended Roof Cross Bars for a 2007 Land Rover LR2 SE
Looking for black rill guard and roof for 2007 Land Rover LR2, SE | While we do not have any grille guards that will work with your 2007 Land Rover LR2, we do have a wide variety of roof racks that'll work great. If your vehicle has a slick...
Recommended Cover for 22' Jayco Travel Trailer for 6 Months Storage in Connecticut
always have had a adco cover the item # 290-52242 looks good, it says for rain and snow, but to be used between trips. well i am covering it for 6 months threw the winter, is it ok for that length of time, this is not short term, i like that...
Recommended Trailer Hitch And Trailer Wiring For 2008 Land Rover LR2
can i use euro ball mount with Curt 13052-59146 Trailer Hitch | The Curt Trailer Hitch Receiver, part # C13052 is a verified as a good fit for your 2008 Land Rover. This is a Class lll hitch and it has a 2 inch receiver opening. The Euro...
Custom Fit Winch Mount and Winch for a 2016 Kawasaki Teryx4 800 UTV
I need a mount and a winch for my 2016 Kawasaki Teryx 800. Will the LT2000 work? Which mount fits? thanks. | Yes, you can use the Superwinch LT2000 ATV winch # 1120210 on your 2016 Kawasaki Teryx4 800. All you will need is the proper mount kit....
Will the Thule Hitch Post Trailer Hitch Mount Bike Rack Fit a 2011 Land Rover LR2 with Curt Hitch
I have a 2011 LR2 and a Thule Hitching Post bike carrier for 2inch hitch left over from my last vehicle. Im looking to purchase the Curt 13052 trailer hitch and am wondering if this setup will be compatible with the proper clearance? Thanks...
Difference Between Rhino-Rack # RR67GR and Leg Kit # RRRLKVA for 2008 Land Rover LR2
Whats the difference between this model for $ and the one shown higher up on page #JA2134 that just has 2500 series and lists for $? Im equipping a Land Rover 2008 LR-2 with smooth roof has sunroof but no factory mounted rails at all. Intending...
Trailer Hitch and Wiring Recommendation for 2012 Land Rover LR2
I want to install a trailer hitch on my 2012 LR2 Land Rover. My questions are as follows: What hitch will work best as a bolt on where I dont have to cut the rear bumper? What electricial unit do you recommend for this vehicle. Keep in mind...
Parts Needed to Install a Brake Controller in a 2015 Land Rover LR2 with 4-Way
Hello, Do you have instruction on installing brake controller and 7 pin connector on recent year Land Rover LR2? I have a 2015 model with factory 4 pin connector. However my camper requires brake controller. Thank you | From there you would...
Will Curt 4-Way Trailer Connector Work With 2009 Land Rover LR2?
I have read that this vehicle cannot be wired for towing because it has a CAN network protocol to transmit signals. Does this kit work on my 2009 Land Rover LR2. Do I need it programmed by a Dealer? Thank you for any assistance. | The Curt Powered...
LED Light Strip Flickering When Plugged Into 4-Way Connector on 2008 Land Rover LR2
I have a 2008 landrover lr2. Im trying to install a light strip along the bumper that plugs into my 4 pin trailer connector, but it just flashes. I know there are 7-4 way adapters that correct this, but my vehicle only has a 4 pin connector....
Will the Thule OutWay 3 Trunk Mount Bike Rack Fit a 2008 Land Rover LR2
Will this bike rack fit a Land Rover LR2 2008? | I checked with Thule and the OutWay 3 bike rack, # TH56BV, will fit your 2008 Land Rover LR2. If you will be carrying women's, children's, or alternative frame bike racks, I recommend using...
Recommended Trailer Hitch And 4-Bike Carrier For 2011 Land Rover LR2
Will Draw-Tite Max-Frame Trailer Hitch Receiver, # 75688, Fit my 2011 Land Rover LR2 HSE? And could you please recommend a bike rack which can carry 4 bikes from you ? | The Draw-Tite trailer hitch, part # 75688 will work great on your LR2....
Recommended Electric Fireplace with Blower Fan
looking for one that has a fan on it for the wife. do you carry one with a fan? | The 26" Greystone Electric Fireplace with Remote Control # 324-000065 does force the air out utilizing a blower fan. It works like a space heater with the different...
Winch Mount Compatibility With 2016 Kawasaki Teryx 2 Door
My Teryx is a 2016 2 door. I dont see anything listed on your web site for a 2 door version. Do you know if there is a difference in the front end for the mount/winch? Thanks! | I reached out to my contact at Bulldog Winch, and the Bulldog...
Does the Draw-Tite Hitch 75688 for a 2008 Land Rover LR2 Require Trimming of the Rear Fascia
land rover states that the bumper needs to be cut to fit towbar is this true? | I could see needing to trim the rear fascia for the Land Rover OEM hitch, but the Draw-Tite hitch does not require fascia trimming. It is designed to fit just below...
Filter Your Search
Contact and Help