What Platform Rack Do I Need For My Factory Roof Rack On My 2005 Ford Expedition?
Hello, I have a 2005 Ford Excursion with a factory roof rack and tracks. I want to make sure before ordering anything that I get the correct rack for my needs. Will this platform fit on my factory roof rack tracks and will it support the weights...
Replacement 2-1/2 Inch Weight Distribution Shank for Reese Strait-Line WD System on Ford F-350
I currently have the following Reese WD Hitch: Strait-Line Weight Distribution System w Sway Control - 12,000 lbs GTW, 1,200 lbs TW - Code: RP66084. I have also upgrade my truck to Ford F350 with a Class V receiver, so that means my 2x2inch...
Towing a Trailer and Carrying a Dirt Bike at the Same Time on a 2002 Ford Excursion
I am hoping to haul 4 dirt bikes using the MT70070! I know, crazy, right? Would it be possible to haul a single motorcycle carrier and small, 3 place motorcycle trailer, using MT70070? Specs: 02 Ford Excursion - Max tongue weight 1,250 lbs 3...
Replacement Upper Bracket for Firestone Ride-Rite Air Helper Springs # F2251
hello, can you help me find a replacement upper bracket for a firestone kit part number F2251? | We have exactly what you need! For a replacement upper bracket on your Firestone Ride-Rite Air Helper Springs # F2251, you will just need the part...
Trailer Wiring Harness to Add 7-Way 2001 Ford Excursion Limited with Factory Tow Package
Is this a direct fit to the harness on a 2001 Ford Excursion? | The Curt Vehicle Wiring Harness # C55774 is confirmed to fit your 2001 Ford Excursion as long as you have the factory tow package. If you do not have the tow package you can add...
How Long Should Installation of Firestone Ride-Rite Air Bags Take
I need to have these installed. What is the expected hours to install on the rear? | If you are installing just the Firestone Ride-Rite airbags # F2255 without an on-board air compressor like the # F2158, then I would estimate that it should...
Recommended 7-Way and 4-Way Connector Combo for a 2005 Ford Excursion Eddie Bauer Edition
There is confusion on which vehicle this trailer wiring is for in the description it mentions Chevy Silverado and Ford Excursion further in the reviews I read multiple different makes and models that were referred to. I have a 2005 Ford Excursion,...
Recommended Weight Distribution for 6,000 Pound Dry Weight Travel Trailer
I am needing a wd hitch with sway control. I will be towing a travel trailer between 5k and 6k lbs empty and behind that a pwc trailer right at 2k lbs max. My tow vehicle is a Ford Excursion 7.3l 4wd. Sometimes we will tow both, other times...
Does Power Grip RV Temporary Power Cord Extension Require Adapters
Our Camper has a 25 foot built in cord but not long enough to connect at a particular site we like. Will this extension fit on the end without the need for a special adapter? If an adapter is needed can you recommend? | The Power Grip RV Temporary...
Trailer Brakes Seem Weak After Installing Prodigy Brake Controller on 2001 Ford Excursion
I RECENTLY INSTALLED THIS BRAKE CONTROLLER IN MY FORD EXCUSION 2001 MODEL YR. I AM TOWING A 30 FT TRAVEL TRAILER WITH DOUBLE SLIDE. THE TOW VEHICLE AND TRAILER ARE SIMILAR IN WEIGHT .MY QUESTION IS IT UNUSUAL TO HAVE TO TURN IT TO 7.5 FOR PROPER...
Trailer Hitch, Wiring Harness and Weight Distribution for 2000 Ford Excursion
Good Morning, I have a 2000 Ford Excursion 7.3L diesel. Im interested in a tow package that is adjustable in height and a weight distribution/sway bar package to tow my camper that will work with my lift. Thanks in advance. | So it sounds like...
Recommended Base Plate for 2003 Ford Excursion
The base plate that is recommended shows its only rated for 5K. Gross vehichle weight is 9K, what other base plate would you recommend? | The 2003 Ford Excursion has a curb weight between 6,650 and 7,688 lbs based on my research so the tow...
Can Weight Distribution Shank be Used Upside-Down to Keep Trailer Level When Hitched
Can the hitch bar on a Reese weight distributing hitch be turned up side down to adjust the height of the ball from the ground to ensure level towing of a travel trailer? | As long as your particular weight distribution shank is not specified...
Which Aries Grille Guard Fits 2000 Ford Excursion
I have a an aries grille guard 3067-2 i need the mounting hardware to fit a 2000 ford excursion 6.8 limited please. | Aries makes their grille guards and their hardware kits specifically for the vehicles so unfortunately it's not as simple as...
Parts Needed to Upgrade Blue Ox Sway Pro Weight Distribution System to Higher Rated Bars
Hello Good morning. I have a blue ox sway pro and I am upgrading to a new travel trailer. I want to get the new bars for the added tongue weight. Also want to get the rotating latch being one of mine is cracked and is the old style where you...
Recommended Flat Tow Components For 2004 Ford Excursion
Have an 04 Base Model 5.4 V*8 Excursion 4 Wheel drive. Can i tow it flat? If so, your best value base plate and 7k lb tow bar system including wiring on Excursion? No Brake components needed. Already have Roadmaster Falcon system mounted...
Recommended Snow Chains for 35/12.5-18 Tires on 2002 Ford Excursion
Hi! Im looking for chains for my 2002 Ford Excursion. Has a 4 lift, 4x4, 35 12.50 R18 tires. Want something for ice, deep snow and can be driven at somewhat high speeds 30-40 mph at most. What would you recommend for options? I want something...
Weight Distribution for a 2018 Jayco Octane SL 272 with 1,000 to 1,500 Pounds Tongue Weight
Hello - Im interested in this product: Strait-Line Weight Distribution w Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW Item # RP66074 for my 2018 Jayco Octane SL 272. Will it fit the a-frame of my trailer? If so, will I need...
Suspension Enhancement For 2002 Ford Excursion
would the sumo spring help my lifted 2002 ford excursion, what is the length of them? | The SumoSprings won't do anything for a lifted vehicle; they are 7-1/4 inches and designed for a vehicle at standard height. The best option for suspension...
Weight Distribution for Towing Grand Design with 1,250 lb Tongue Weight
What weight distribution should I use when pulling a grand design momentum UBS 9294 with a hitch weight 1250 | When picking out a weight distribution system you want to go with a system that has a tongue weight range where your trailer tongue...
Replacement Surge Brake Actuator Recommendations for Atwood 82541
I have an Atwood hitch p/n 82541 Disk brakes 3 inch wide alum sq tube 6000 lb max weight Looking for a direct replacement | I recommend either using the Demco 6K # DM8605101 if you want a standard actuator that fits a 2" hitch ball or the...
Firestone Ride-Rite Air Helper Springs Recommendation for a 2002 Ford Excursion
What’s the difference between F2255 and F2251, Firestone airbag kits for a Ford Excursion? | Thanks for reaching out, Philip! The Firestone Ride-Rite Air Helper Springs # F2251 replaced the # F2255 so I recommend going with the newer version...
Hardware Size Used to Install Curt # C14011 or Torklift # TLF1006 on 2000 Ford Excursion
Greetings and thanks for your help. The question I have is in regards to the 2000 and early 2001 Excursions. From my research, those model years had an early model hitch that had smaller 14mm hardware and the later 2001-2005 models had an updated...
Replacement Hitch Pin for Yakima SwingDaddy Bike Rack
Do you sell the replacement hitch pin for this rack? Yakima SwingDaddy 4 Bike Rack - 2inch Hitches - Swinging Item # Y02464 Thx | We do sell a replacment hitch pin for the Yakima SwingDaddy. The hitch pin is part # 889-0231. |
Filter Your Search
Contact and Help