Vehicle Wiring Harness 4-Way Flat for 2007 Nissan Xterra Relays and Pigtail
If I purchased the four flat one already do I need to purchase the relay part to make the four flat part work? If so do you have the relays for sale by themselves not in a kit | At this time we do not have the relays and wiring connector sold...
Lowering 2 Inch Trailer Hitch Receiver when Using a Motorcycle Rack
Id like to lower my receiver by 8inch for when I want to use a motorcycle rack. What product can you suggest? Ive seen 2 parts from Curt that look like they might work...replacement shank and multi-ball adjustable ball mount receiver. Am...
Troubleshooting Trailer Light Issue with 2016 Ram Big Horn 2500
When i plug in my trailer plug and turn on the lights the trailer lights will come and go out, then my left tail light goes out on the truck. So I unplug the trailer and start the truck and the tail light comes back on on the truck. I always...
Crossbar Recommendation for a Thule Evolution Box to Attach to a 2006 Nissan Xterra
I just procured a Thule Evolution Cargo BoxSerial number 673-022305-029. I would like to mount it on my 2006 Nissan Xterra, but I noticed that the mounting U-bolts were not wide enough to go on the factory installed cross bars. The cross bars...
What is the Correct Trailer Wiring Harness for a 2008 Nissan Xterra without a Factory Tow Package
Will kit number C56225 do what I need it to do? Im looking to buy a harness that has everything built into it so I dont have to run wires all over the place do you make such a kit? Thank you! | Since your 2008 Nissan Xterra does not have the...
Replacement Hardware for a Curt Trailer Hitch
I have a 2012 Nissan Xterra. I have a Curt trailer hitch. I need the bolts for this. I could find the page on the website. | We have exactly what you need. You will want the Replacement Hardware Kit for Trailer Hitches item # RHK. This will...
Best Cushioned Equalizer Replacement for Equalizer that is 6 inches Wide
I would like to know if the Dexter E-Z Flex or Lippert equalizers would be better a better choice for my below application... I am looking to upgrade the suspension on my small 4,500# tandem trailer with a Dexter ez flex # K71-652-00 solution....
Where Should Safety Cables Connect To On A Roadmaster Baseplate On A 2006 Nissan Xterra
Just had this base plate installed on my 06 XTerrabut one gotcha moment has stopped us from using it: where on earth do I attach the safety chains??? | The Roadmaster Direct-Connect Base Plate Kit # RM-344-3B have a tab with a hole on the bracket...
Looking for Timbren Axle-Less Trailer Suspension System w/ 4 Inch Lift and Electric Brake Hubs
Do you carry the Timbren HD 4inch lift kit including the wheel hub and electric brakes? If not, what would you recommend in the way of a 5 on 4-1/2inch hub with electric brakes? Do you know if I could use my existing hubs / brakes from the...
Solution for 7-Way Wiring Harness on 2015 Nissan Xterra that Comes Disconnected
2015 Xterra trailer wiring harness. Backside of socket with all the colored wires going into it wont stay plugged into the backside of the socket. It jiggles off on the highway and I lose my brakes, lights, etc. Looks like it should have...
Recommended Weight Distribution System for Towing a Trailer with 270 lbs Dry Tongue Weight
I think I have the following situation: My trailer is the Fleetwood E1, My tongue weight unloaded is 270#. The recommended system # 49586 seems to heavy. Is there an alternative. I can email sketch of my trailer if you send. Thank you | The...
Troubleshooting NC Error Code on Brake Controller when Trailer is Plugged In
I have an nc code on controller. Dont onow if this means brakes arent set. | The NC code means the controller is not seeing a trailer connected, so the brakes will not work. You will want to clean the connector with some sandpaper specifically...
Which Trailer Wiring Harness Fits 2003 Nissan Xterra
what part # do i need #55244 or # C59496 mine is a automatic | The particular harness you need will depend on whether or not your 2003 Nisssan Xterra is/was already equipped with a factory 4-Way connector. If you do not currently have a 4-Way...
Recommended Wiring and Brake Controller for 2001 Nissan Xterra with Factory 7-Way
Hi there, I have a 2001 Nissan xTerra with a factory trailer connector. Id like to install a brake controller, but cant seem to find any specific instructions on how to do so. Can you help direct me to the right parts and ideally instructions? Thanks!...
What is Amperage Rating of 12 Volt Charge Circuit of 2013 Nissan Xterra
I will be pulling a small camper with a big battery charged by the engine on my 2013 Nissan Xterra using a dc to dc charger. The question is, how many amps will the charge wire supply using this 7 way setup with relays? | To get an idea how...
Roof Mounted Cargo Box Recommendations for the 2005 Nissan Xterra with Factory Roof Rack
Hi. I am looking for a enclosed roof system for my husbands 205 xterra. He already had the tubular roof rack that comes on many of the xterras. We ski and snowboard...looking for some help in finding him the right one for a x-mas pesent. thanks...
Tips for Swapping the 12 Volt and Brake Output Wires on Factory Wiring on a 2007 Nissan Xterra
The Blue and Black wires are incorrect for the Brakes and Constant Voltage for my 2007 Nissan Xterra. This is a known issue as I have read a few similar comments. What is the Etrailer recommended method for fixing this issue. Is there a pin/blade...
Trailer Hitch With Highest Weight Capacity for 2008 Nissan Xterra
Xterra 2008 towing Have dealer added receiver Max towing weight 5K, max hitch weight 350 #. after market and want to know if there is any method/way to increase the tongue weight? I have a basic understanding of towing dynamics and safety...
Can The 4-Way Curt Harness Be Upgraded to 7-Way on a 2011 Nissan Xterra?
2011 xterra. I have your flat Trailer wire setup already installed. Do I need to buy the whole 7 pin kit to upgrade this? | If you already installed the 4-Way Curt Wiring Harness # C56225 on your 2011 Nissan Xterra, you will only need the Replacement...
Diode Tow Bar Wiring For Vehicle with Separate Circuits
I have the Roadmaster 15267 Toad Wiring Kit W/6-7 FLEXCORD. My circuit is separate, brake and turn signal. I want to wire it combined so it works with my class c rv. From the instructions it looks like the diodes only go on the brake/taillight...
Does Universal Towing Mirror KS3891 Fit 2014 Nissan Xterra
One of your experts recommends the KS3891 towing mirror for a 2014 Nissan Xterra. But when I click on the product, it says it is not recommended for my vehicle. I worry the clamp-ons will break my mirror, and these seem more secure. Will the...
Installing a 7-way Trailer Connector On 2010 Nissan Xterra with Existing 4-way Connector
I previously purchased and installed a wiring harness from you:118525 Which works great. Am I correct in assuming that if I want to add the brake-controlling connector I only need to purchase this: 118267 In other words, does the 118525 kit...
Inside Dimensions of Bar Mount Assembly for Thule Hullavator Pro for Mounting on 2006 Nissan Xterra
good morning, I have an Xterra and need to mount a cross bar on my roof rack, that this part will fit over. I was thinking about buying unistrut 1 5/8inch x 7/8 and using U bolts to attach to my round bars. can you tell me the inside dimension?...
Will The SportRack Vista XL Cargo Box # SR7018 Fit On A 2007 Nissan Xterra With Factory Crossbars
Will this SportRack Cargo Box Fit atop a 2007 Nissan Xterra that has a factory installed roof rack? My concern is that the U-bolt wont be wide enough or long enough to fit/wrap around the roof cross bars. I tried a similar cargo box that looked...
Filter Your Search
Contact and Help