Will Curt Trailer Hitch Fit a 2006 Chevy Corvette with Corsa Cat Back Exhaust
Wondering if this will still fit with an aftermarket Corsa exhaust system! | Trailer hitches including # C11380 are designed for and tested on stock vehicles so I cannot say for sure if it will fit with aftermarket exhaust installed on your...
Parts Needed to Tow Trailer With 2001 Chevy Corvette
Have a 2001 Corvette Coupe, need the undercar hitch, extension, and ball to tow my Jetski Trailer that receives a 2inch ball. Can you list the components and costs for all 3 parts.....Gordon | I can indeed list out all the parts you need to...
Installing Curt Universal Wiring Harness on 2003 Chevrolet Corvette
Reading your installation sheet for the 59236 harness, I cannot determine which vehicle wiring type applies to my 2003 Corvette. Is it the PWM-ST? Thanks | When installing the Curt Universal Harness w Powered Tail Light Converter # C59236...
Are There Any Microwave/Exhaust Fans That Will Fit My 2005 NuWa Discover America Fifth Wheel
We need to replace our microwave and fan combo. It is 23 1/2 inches wide by 19 inches tall. The unit we have is an Apollo which I understand is no longer made. | I checked the microwave/exhaust fans that we carry as well as our vendors, Way...
Cargo Bag Recommendation for the Luggage Rack of a 1991 Chevy Corvette Convertible
Which bag for a 1991 corvette convertible luggage rack? | The Rightline Car Top Duffel Bag # RL100D90 measures 36" x 16" x 13" so it should work well on the luggage rack that is on the trunk of your 1991 Chevy Corvette convertible so I would...
Lift Ramp Suggestion For Loading Corvette into Car Transporting Trailer
1994 ZR-1 and 1996 GS C4 Corvettes towed in an enclosed 20ft trailer. The max trailer door height when opened is 9.25 inches to the ground. Not sure if I need the 7 inch by 74 inch or 9 inch by 96 inch ramp? | Given the low ride height of a...
What is the Approach Angle for The Race Ramps Rally Ramps # RR-30 For Use On a 2019 Chevy Corvette?
Will this race ramp rally ramp work with the clarence height of a 2019 Corvette Grand Sport . Trying to keep cost down from you long race ramp I seen in a video. | Your 2019 Chevrolet Corvette has a 18 degree approach angle. This will allow...
Can a Taillight Converter Work with a 2005 Chevy Corvette C6
Part Nr:118158. I am thinking of using this device on my Corvette C6 to be able to separate the blinker from the brake light so i can use european tail lights with separate amber blinker and brake lights. My question is does the amp load go...
Replacement Converter Options For A 1994 Fleetwood RV
My question is I have a switch on the back of my converter that switches from generator mode to Hardline mode being plugged in the park it is blowing and I have to get a new converter what converter is compatible for my 1994 Fleetwood RV that...
Magnaflow Universal Catalytic Converter, Part # MF94309 as Replacement for 1997 Chevy Corvette
I have a 97 corvette with Kooks headers with 3 cross over pipes with high flow metal cats. Will the 94309 series work for a replacement. | The MF94309 converter will work mechanically speaking, but due to the tight clearances of the Corvette...
Availability of Molded Floor and Cargo Mats for 1985 Chevrolet Corvette
Hi: i build transmissions daily. And often step in fluid ect. And i would like to buy some sort of moulded floor and cargo mats Thanks | All of the floor mats I have to fit a 1985 Chevrolet Corvette are carpeted front mats. I am including...
What is the Weight Capacity for the Roadmaster 12-Inch Safety Cable Extensions # RM-910648-12
Is the pair rated at 8000 lbs or is each cable 8000 lbs for a total capacity of 16k? I have a 15k trailer. Will this pair work or do I need to buy the 8k cables and quick links individually to meet the rating needed? | The 8000-lb rating for...
Custom Mounting the RVS-5350 Backup Camera Monitor
I would like to mount the RVS-5350 monitor into a ProClip mounting bracket that is installed along the radio chassis on the front dash, which currently holds my smartphone while I drive. I do not want to use the adhesive attached dash top mounting...
What is Coiled Length of Bargman 7-Way, RV-Style Connector w/ 6 Long Coiled Cable
Regarding Bargman WG54006-043 What is the length of the coil when fully retracted? When extended to 6, how much force in pounds of pull is there on the tow-car receptacle? I know about the 2 different color codes for RV Flat connectors and...
Replacement Installation Hardware Kit for Curt Hitch # C11705 for 1992 Chevrolet Corvette
does Curt or you offer the hardware kit separately for this hitch? | Yes, we can help you with replacement installation hardware for your Curt Hitch # C11705. Hitch hardware is single-use only, so if you will be re-installing this hitch it...
Towing Components for 2011 Chevy Corvette Grand Sport
would like to order a trailer hitch for 2011 Corvette Grand Sport. Does the mounting hardware nuts/bolts/washers come with the hitch or do I order separately? Just need simple wiring that goes from vehicle to trailer. I have a 4 round hook...
Replacing Old O2 Sensors When Replacing a Catalytic Converter
IF I CHANGE SENSORS WITH MY NEW ASSEMBLY SHOULD I RUN IT IN WITH THE OLD SENORS TO BURN OFF ANY POSSIBLE OILS THAT PIPE MAY BE COATED WITH THUS AVOIDING SENSOR CONTAIMATION? | I spoke with my contact at Magnaflow and he said it is not going...
Which JTs Strong Arm Will Fit a 2016 Flagstaff 5th Wheel Trailer 8528IKWS
Hello, I have a question in report in stabilizing tj strong arm, is which modele is made for my fifthwheel flagstaff on model 2016 8528ikws thank you | To determine which JT's Strong Arm Jack Stabilizer you need for your application you will...
Trailer Hitch for 2003 Chevy Corvette Towing a Harley Davidson on a Trailer Weighing 900 lbs Total
Should this product be ok to haul lite 150 pound motorcycle trailer and 750 pound H.D. | The Curt trailer hitch # C11034 has a gross trailer weight capacity of 2500 pounds and tongue weight capacity of 250 pounds. The weight of the trailer plus...
Can Cooler Fittings Point Down on the Cooler of the Derale Oil Cooler # D15603
i have a 67 corvette with a 1970 454 motor and a 4spd trans . the car has headman headers and no a/c the oil cooler kit1506 looks like it will fit . can i mount the cooler with the fittings on the bottom .and do you sell the an braided lines...
Brackets to Install Keel Rollers Above a Boat Trailers Frame
I am trying to add 10inch rollers to help center a 18foot boat when putting it back on a Yacht Club 1818B bunk trailer. The problem is that the cross members are too low to install the rollers . So, is there an aftermarket plate that can...
Battery Charger Option for a 2002 Corvette C5 Red Top Optima Battery and Deep Cycle Trailer Battery
will the ctek us0.8 charger be sufficient enough to maintain my red top optima battery in my 2002 c5 corvette or maintain my deep cycle travel trailer battery. I dont drive the corvette in winter,it sits alot | After doing some research on the...
How to Choose Correct Lug Nuts for 16 Inch Wheel
I have a Doolittle 16+6 EZ loader trailer with 8x6.5 lug pattern. I ordered wheels from you but need lug nuts, do you know the size of the lug I would need? It is a 2 axel 14k trailer | Thank you for your purchase of the Aluminum Viking Series...
Installation Procedure for Curt Class I Hitch # C11705 in 1991 Chevrolet Corvette
Your unit #C11507 for a 1991 Corvette, does that have a 1inch slide in or a 2inch slide in? Also is there any cutting or grinding required to install or is it a direct bolt-on? Thanks | The Curt Class I Hitch # C11705 that fits your 1991 Chevrolet...
Filter Your Search
Contact and Help