Right Side Trailer Lights Not Working on Trailer Towed by a 2011 Mazda CX-7
I installed this module per the instructions and the passenger side of the trailer tail lights do not work. The running light on that side works fine. I checked the light itself for functionality and it works solo. Any ideas? | This sounds like...
Hitch and Expandable Bike Rack Recommendations for a 2008 Mazda CX-7
I do not have a hitch on my car yet. Id like to get a 2-bike platform rack like the Thule T2, or Kuat NV, etc that has the option to add a 2-bike extension. The only racks Ive noticed that offer this option are the ones that mate up to Class...
Are There Any Microwave/Exhaust Fans That Will Fit My 2005 NuWa Discover America Fifth Wheel
We need to replace our microwave and fan combo. It is 23 1/2 inches wide by 19 inches tall. The unit we have is an Apollo which I understand is no longer made. | I checked the microwave/exhaust fans that we carry as well as our vendors, Way...
Will the Thule Passage 2 Trunk Mount Bike rack Fit a 2010 Mazda CX-7
Will this rack fit my 2010 Mazda CX-7 | Thule does list the Passage 2 bike rack # TH910XT as a fit for the 2010 Mazda CX-7. But, if the vehicle has a rear spoiler it is considered as a not fit application for trunk mount bike racks. I have included...
How Do You Connect 4-Way Flat Connector In Rear Cargo To Added 7-Way On a 2010 Mazda CX-7?
I am wanting to install a 7 pole harness on my 2010 Mazda cx7. Looking at the site the process requires installing a 4 pole harness and then a 4 pole to 7 pole adapter. The thing is the 4 pole looks it connects out the bottom the the back hatch...
Will the Thule OutWay 2 Bike Carrier # TH45JV Fit a 2011 Mazda CX-7
Will this fit a 2011 Mazda CX7? | The ThulOutWay 2 Bike Carrier, part # TH45JV, will fit the 2011 Mazda CX-7 as long as it does not have a spoiler. Also, the rear wiper can not be used when the bike carrier is attached to the car. I am including...
Parts Needed to Tow Trailer with 2010 Mazda CX-7
My Mazda CX7 2010 has towing capacity of 2000lb MAX. I need to buy the right towing kit to tow the trailer 5x8 I do not understand how to determine what GTW or TW I need and wither I would need a ball or standard mount. Do I need to buy the...
Recommended Replacement Idler and Drive Head Covers for a Lippert Solera Awning
Will part LC643922 fit both sides of the awning? I need a replacement cover for the left side, nearest to the rear of my trailer which is a ‘19 Keystone Bullet 1700bh. Thank you John Ellsworth 925 963-5288 [email protected] | John,...
Recommended Wheels to Go With Taskmaster 5.30 x 12 Tires on Haul Master Trailer
I recently purchased 2 TT53012C tires from you. Do you have rims that are compatible to the Haul Master heavy duty folding trailer hub. 5 hole. I believe it’s a metric size. | I may have a solution for you, but we do not have any 12" trailer...
How Does The Thule OutWay Platform Trunk Mount Bike Rack Sit on a 2010 Mazda CX-7 Bumper
hi, seeing youtube I see that the th65jv is mounted on many cars with the spoiler and anyway my car mazda cx.7 year 2010 and also in the American version is equipped with a spoiler plastic sturdy enough. I tried to put a strap and pull, as if...
Fit of SportRack Pathway Bike Rack on 2012 Mazda CX7
Will this work well with a Mazda CX7 - be back enough from bumper, rear hatch? Opening rear hatch work well when the rack is lowered? Planning on using with a Hidden Hitch 1 1/4 hitch. Thanks | When we installed the Hidden Hitch 1-1/4 on a...
Clearance From Center of Hitch Pin Hole To Rear Bumper of CURT Hitch # 12093 on 2011 Mazda CX-7
inches from center pin to clear bumper on 2011 CX-7 Mazda.my bicycle rack is just over 6inch from center pin to upright. Have purchased two hitchs from you. Also need proper wiring harness for 2011 sport no power seat, but did they wire the...
Will Exhaust Heat Cause Issues With Hitch Bike Rack Installed On 2011 Mazda CX-7
I have a 2011 Mazda CX-7. In the pictures for the CX-7, I notice the bike tires are directly behind the vehicles exhaust pipe. Can this cause heat damage to the bicycles rim/tire on a long trip?? | When the Hollywood Racks Sport Rider SE2 2-Bike...
What Is Required To Install Draw-Tite Class III 2 Inch Trailer Hitch # 75512 On A 2009 Mazda CX-7
Is there any drilling required, or moving of exhaust pipes etc. How long to install?? | There is no drilling required when installing the Draw-Tite Class III 2 Inch Trailer Hitch # 75512 on a 2009 Mazda CX-7. You will need to lower the exhaust...
Trailer Harness Wiring Harness Recommendations for a 2011 Mazda CX-7
I dont get it. I have a new CX-7 i SV. You show 2 products that are for this vehicle, #C55593 and #118405 but I read that the C55593 does not provide all the wiring necessary for trailer lighting. Can you explain what this wiring harness...
Hitch And Wiring For A 2010 Mazda CX-7.
I need to purchase a hitch and harness for my 2010 Mazda CX-7 Sport. What do I need to know to tow a 14inch fishing boat trailer using a 1 7/8 ball? | For your 2010 Mazda CX-7 I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom...
How Many Of The Dexter Nev-R-Adjust 23-468-469 Are Required For 2012 Keystone Bullet W/ Tandem Axles
How many kits do I order to do both axles on my 2012 Keystone Bullet Premier 31ft? | Each of the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K # 23-468-469 you were looking at include a left and...
Locking Hitch Pin Recommendation for the Thule Vertex Bike Rack
hello, will item HE6033 work for the thule vertex bike rack? | I do have a threaded, locking hitch pin for your Thule Vertex bike rack, but the Heininger Threaded Hitch Pin, # HE6033, will not work with the Vertex bike rack because the threaded...
Will MORryde Suspension Upgrade Kit Fit Lippert Road Armor Equalizers
Will this shackle upgrade kit work with Lippert Road Armor Equalizers on a 2022 Keystone Bullet 250BHS? Current shackles are 2 3/4” hole to hole. | Yes, the MORryde Suspension Upgrade Kit part # MR46ZR can be used with your Lippert Road Armor...
Replacement Awning Motor Options for a Lippert Solera Awning W/ A Venture Motor
I have 2016 Keystone Bullet 243BHS! They awning motor died! I need to know replacement for Lippert Solera! The old motor reads: Venture MFG co SN 8855631 | I was not able to locate anything on that part number, however...
Cushioned Equalizer Recommendation for 2014 Keystone Bullet Ultra Light
I have a 2014 Keystone Bullet ultra light with 42 inch wheelbase and want to upgrade my tandem axle equalizer...what is available? | For the wider wheelbase trailers like yours we have the Equa Flex part # LC314336 which has a distance of 14-5/8...
Trailer Drivers Side Tail Light Not Working, All Other Lights Work
Hey guys I bought a hitch and wiring for my 2010 cx7 and it plugged in fine and when I went to turn the lights on, all the lights worked beside the driver side back light aka the license plate side. If u guys can help me out in any way please...
Tow Hitch Mount Bike Rack with Good Ground Clearance for a 2011 Mazda CX-7
Just bought a 2011 Mazda CX7 and had hitch installed with a 2 inch receiver opening. Unfortunately, once the 3 bikes are put on the rack, it looks like the bike wheels are so low to the ground. Guess the body frame of the Mazda cx7 is lower...
How To Determine If Trailer Hub Bearing Is Full Of Grease
Hi ! In the video he says to fill the remainder with a grease gun , When do you know when it s full . Thanks | If you have EZ lube spindles with the grease fitting on the end, as seen in the video you are referring to for Replacement Trailer...
Filter Your Search
Contact and Help