Replacement Rear Bumper Options For A 1976 Ford F-250
Looking for rear bumper mounting kit for a 1976 Ford f250 4x4 has a narrow frame 34 | Yes, we have the following style options available for your 1976 Ford F-250 with brackets compatible with your 34" frame: Westin Fey Surestep Deluxe XLT Rear...
Correct Replacement Control Panel for a Lippert 4-Point Leveling System On a 2021 Thor Delano
Hi, did this touch pad can replace this one Item # 175225 on my thor delano 2021, thank you | The Replacement Touch Pad Control Panel for Lippert Power Gear Hydraulic RV Leveling System # LC58CJ is the correct replacement for the Lippert Power...
Recommendation To Cover Hitch Ball Holes On Westin Fey Diamondstep Rear Bumper # 20002-92230
I just ordered, received and installed the step bumper part 20002-92230, and I am EXTREMELY pleased with it I have submitted a review that hasnt published yet. I dont intend to install a hitch on the truck, its a 15-year-long restoration that...
Trailer Hitch Recommendation for a 1966 Ford F-100 With a Standard Bumper
What is a 10 inch bumper? The notes for this hitch say its for the 66 F-100 with the 10 inch bumper. I have no idea what that is. My truck has the original, steel/chrome, no-step bumper as installed by Ford. Will the Curt 13099 hitch work...
What Hitch will Work Best on my 1982 Ford F-250 with an Aftermarket 38 Gallon Fuel Tank
I have a 1982 F250 with a 38-gallon after-market rear gas tank - it hangs down below the frame rails, so any hitch that attaches to the frame rails must not encroach on this area between the frame rails in the vicinity of the tank. It looks...
Diamond Step Chrome Rear Bumper For 1977 Ford F-100
Hi I have a 1977 ford f100 I would like a diamond plate chrome rear bumper for what would fit and what installation kit would I need? Thank you. | Hey there Jason; for your 1977 Ford F-100 we do have a diamond step chrome rear bumper that fits,...
RV Door Striker Plate that is 3-7/8 inch Long by 1-1/4 inch Wide
I need a striker plate for a door that measures 3 1/4 L x 1 1/2 w Can you recomend something that will work? it is sliver and looks like fastec 6000-10 but is 1 too short. | I wish we had something that was close to what you need but I checked...
Compatibility of the Tow Ready 4-Pole Mounting Bracket and the Curt T-Connector Wiring Harness
Will product 18144 work with c55301? | Yes, the Tow Ready Mounting Harness # 18144 will wok with the Curt T-connector Harness, # C55301. The mount can connect at the bumper of your vehicle to mount the 4-flat plug of the Curt harness. |
Recommended Trailer Hitch Compatible with 1968 Ford Truck
Will the Draw-Tite - FORD VANB.Y - 75315 model hitch fit on a 1968 Ford truck..? | The Draw-Tite 75315 hitch has been discontinued, but is only a fit for Ford Full Size Vans. It will not fit a Ford Truck. For your 1968 Ford Truck, I recommend...
Will B&W Heavy-Duty Trailer Hitch # BWHDRH25122 Fit 1977 Ford F-250 with 34 Inch Frame
Will this fit the 34” frame F250 4x4? | Yes, the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25122 referenced in your question will fit the 34 inch frame width on your 1977 Ford F-250. This was the common frame width on trucks during that...
Installation of 7-Way RV Connector on 1981 Ford F-250
I have a 1981 Ford F250 and need to install a 7-pole trailer connector. What product should I buy? | If your 1981 Ford F-250 already has a 4-way connector installed simply add etrailer"s Universal Installation Kit for Trailer Brake Controller,...
Adapter for 4-Flat on Truck and 7-Way on Trailer
will this connector work for a 7 way on the trailer to a 4 way on the truck | We do have a solution for you, though the Reese Trailer Connector Adapter # 78118 will not work for you. Instead I recommend the Hopkins Endurance Quick-Install Trailer...
Distance Between Vertical Mounting Flanges of Curt Hitch C15300
what is the inside measurement between the vertical flanges of this hitch? need to know the total measure to make sure my fuel tank fits between them. Thanks | I checked with Curt and the distance between the vertical mounting flanges of the...
Why is There Only One Ground Wire on the Adapter 4-Pole to 7-Pole and 4-Pole Part # 37185
On part #37185 why is there no ground wire coming off of the Four flat connector that plugs into the existing 4 way? Is the single white wire the ground for both the 4 flat and 7 round? If so can i use the part #40105 T connector in my wiring...
Will the Camper Hold Downs, # HSSF Fit a 1969 Ford F-250
I need to know if these HSSF will fit a 1969 F250 style side bed box? I know they will fit many newer pickups,however the older boxes are made different.Thanks. | The Camper Hold Downs, # HSSF, are a universal fit item that will fit most full...
Trailer Hitch Receiver Fit For 1965 Ford F-250 With Custom Bumper
I have a 65 Ford F250 2WD truck with a unique rear bumper customized by the original owners. I need to see if you have a hitch that would work with this. | Outstanding photos thank you so much for sending them, and based on that we do have...
How Much Tire Clearance is Needed for Timbren Rear Suspension Enhancement
I have a custom truck and was looking into the #TUR350 as it is a universal fit that seems like it would work for my application. How much clearance is needed between the frame and tire for this to fit? | The Timbren Rear Suspension Enhancement...
Recommended White Spare Tire Cover for 29 Inch Tire
Will a cover for a 28 inch tire fit a 29-inch tire? My tire size is 8.75R16.5. | When it comes to covers you really don't want to get something too small and try to make it work. It would be better to get something a little too large and...
Are There U-Bolt Plates for 3" Diameter Axle and 2.25" Leaf Springs
i want a 3 inch trailer u bolt with plate kit but i have 2.25 inch wide leaf springs do you have anything that fits | The two most common size leaf spring sizes that will be used with a 3" diameter axle are 1-3/4" and 2". It's not common to...
Class V Trailer Hitch for 1973 Ford F-350 with 34 Inch Frame
I am looking for a trailer hitch that is the standard and sits right below the step bumper. The truck is a 1973 F350 and has the narrow frame which is outside to outside or 34 inches. I dont really see measurements for all of the hitches that...
Bolt Hole Spacing Drivers Side Frame Rail to Passenger Side Frame Rail B&W Heavy Duty Receiver
left to right hole spacing with hitch configured for 34inch frame | The Hole spacing for the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25198 are as follows(all measurements are for center of hole to center of hole). 34" Width Frame -Front...
Curt Gooseneck Flat Plate Installation Weight Capacity
Hello, Can I bolt this flat plate to the top of the frame? What is it rated by itself? Thanks Can this product pull a trailer with just the 6 grade 5 bolts? | Curt says the Gooseneck Flat Plate # C65500 can be installed to the frame rails...
Comparing etrailer Electric Trailer Brake Assemblies to Dexter Brakes
I have a 14k trailer has dexter axles and one axle has the self adjust dexter brakes and I want to add brakes to the second axle. I am wondering if there is any noticeable difference between the dexter brand brakes and the etrailer brand brakes....
Availability Of 2-5/16" Hitch Ball with 1-1/4" Diameter Shank That Is At Least 3" Long
I am looking for any ball hitch. But one needs to be 2 5/16 inche size with a shank width of 1 1/4 inches and a shank length of 3 inches. And I need the same hitch in 1 7/8 inch. I have been looking for a while and haven’t seen any with a long...
Filter Your Search
Contact and Help