Force Rating for LS10602 Atlas Lift Hood Lift Support
What is the lbs pressure on these struts? | The force rating for the Hood Lift Support # ATL32QR is 78 lbs according to my contact at Atlas Lift. |
What is Extended and Retracted Length of Universal Lift Support # ATL53BR
ATL53BR States extended length 23inch and compressed 13inch with 10inch stroke. I purchased a set on Amazon that said the same but actual compressed measure was 13.6inch not a full 10 Add: Strength: 100 lbs/445N Per Strut 2 pcs are 200lb. Super...
Availability Of 18-1/2" Gas Shock For Boat Hatch
the gas strut on my boat hatch measures 18.5 inches - I see you have 17 and 20 inches - would a 20inch work just not fully extended? | I have a better option for you, but it's possible a 20" shock would work, but you may run into issues with...
27 inch Long Strut Lift Assist with Ball End Sockets on Both Ends
I am looking for 2 100# 27” long 10mm ball lift supports for a tonneau hard cover. Could you please tell me if you carry them and how much! | For a 27 inch long strut that has ball ends on either end we have the part # ATL32QR which would work...
What Replacement Glass Hatch Rear Support Fits My 2011 Honda Pilot?
Hi, I drive a 2011 Honda Pilot Touring, 2WD and I need to replace the lift supports for the glass portion of my lift gate. According to the description of your product, it is for the hood. Is the hood another name for the glass portion of my...
Is A Replacement Gas Strut With A 100-lb Rating And Measures 27" Long Available?
How many pounds? Looking for 27” with 100# rating. Gas strut in case the page I’m looking at does not follow the question, ty. | I spoke with Atlas Lift, and the poundage rating for the Hood Lift Support # ATL45VR is not something they record. However,...
Where Are Atlas Gas Struts made?
are atlas gas struts made in usa | Atlas Gas Struts like the # ATL37ZR are not made in the USA. All of the Atlas struts are made in Asia. They do not tell us what specific country. |
Correct Rear Hatch Liftgate Supports for a 2016 Ford Edge
I need replacement hatch lift struts for my 2016 Ford Edge. I wanted to be sure that part #ATL29GR would work on either side of the hatch? I am a rookie at this | I spoke to the manufacturer for you and the Hatch Lift Support part # ATL29GR...
Availability Of Windshield Wiper And Arm For A 209 Fleetwood Pace Arrow 38P
Do you guys have a 30” wiper arm for a 2009 Fleetwood Pace Arrow 38P. I need 2 of the entire wiper. The arm and the wiper blades | We do offer wiper blades for you 2009 Fleetwood Pace Arrow Motorhome, but we do not offer the wiper arms. For...
Can Roadmaster Tow Defender Gas Strut Be Used for Older Blue Ox KarGard II
Will this strut also fit a Blue Ox Kargard II # BX88255? This item has been discontinued by Blue Ox. Their description is part # 227-0117 Gas Spring, 110#. It looks like the same part. | Carol, The Replacement Gas Strut for Roadmaster Tow...
Correct Replacement Lift Strut for 2005 Chrysler Town and Country Rear Hatch
I have a 2005 Chrysler town and country mini van I need the shock that opens the tailgate when you push the button on the key fob | The correct liftgate support shock for a 2005 Chrysler Town and Country is the Liftgate Lift Support part # ATL64RR...
Replacement Lift Support for LT08-05B 13-3/4" Strut on Toolbox
I am looking for a LT08-05B STRUT for a tool box It is 13.75 inches ~35mm from ball end center to center. | To replace your LT08-05B strut I recommend checking out the Universal Lift Support # ATL43BR which installs on a 10 mm ball socket like...
Identifying Left and Right Struts for 2013 Subaru Outback
Struts listed for 2013 Subaru Outback rear hatch don’t indicate which is left or right? | The # ATL46XR is for the right side and the # ATL47XR is the left. They have an L and an R stamped into the mounting brackets to indicate left and right. |
Option For Replacing A Contico 40231550 Strut
I have a tool box on my truck that needs new struts. The part number is Contico 40231550 it is a 10foot cylinder that extends to 15inch and it has a 3/8inch hole on each end. do you cary this or have a substitute? | Hey Albert. I do have a potential...
Does the Hood Lift Support for a 2006 Toyota 4Runner Work with Front Hood or Rear Hatch
The text of the advert. said that this part was for the hood. Is it for the hood over the engine compartment or the back door/hatch? Thanks. | The Hood Lift Support part # ATL94YR which is a fit for a 2006 Toyota 4Runner is designed to replace...
Correct Liftgate Lift Support for a 1997 Toyota 4Runner
What is the diameter? To fit a 1997 4-Runner SR5 | The correct Liftgate Lift Support for a 1997 Toyota 4Runner is part # ATL98VR. |
Lifting Capacity of Atlas Lift Gas Strut # ATL65YR
How many pounds of force does it exert? | The force per shock that the Atlas Lift Strut part # ATL65YR exerts is 118 lbs. |
Is Atlas Lift Tailgate Lift Support Meant for Rear Hatch or Back Glass
Hi I was wondering if this was meant for the trunk of a 2007 matrix xr or can it also be used for the glass window trunk on a matrix? | The Tailgate Lift Support # ATL82GR will only work for the rear hatch of the 2007 Toyota Matrix. The back...
Filter Your Search
Contact and Help