How Would Gen-Y Horizontal Torsion Clevis and Pintle Hook Combo Connect to Pintle Setup
It says it’s Pintle hitch capable. Can you explain how? | To use the Gen-Y Horizontal Torsion Clevis and Pintle Hook Combo w/ 2-5/16" Ball # 325-GH-1124 in a pintle setup would require you to pull the ball up through the top of the clevis opening...
Can EcoHitch be Installed with Draw-Tite or Curt Front Receiver on 2019 Ford F-250
I have not looked at the installation instructions for the above front mount trailer hitch receivers, therefore I am curious if both the Ecohitch and either the Draw-Tite or Curt can both be installed together? This would allow more versatility...
Gross Towing Capacity Of The Gen-Y Phantom Adjustable 2-Ball Mount Stacked Receiver # GY48XR
At the top of the page, it shows 21K capacity but under the Specs, it shows 12K. Which is it? Thanks! | The Gen-Y Phantom Adjustable 2-Ball Mount w/ Stacked Receivers # GY48XR is rated for 12,000lbs in capacity. The 21,000 in the item description...
Solution for Trailer Hitch With 2 Inch Receiver on 1997 Pontiac Bonneville
Hi I’m looking for a class 3 2in hitch for my 97 bonneville se. Is only one curt hitch Ive found that’s fits but is 1 1/4 hitch size, I need 2in. I have small flat bed trailor weight class 2 is fine long as 2in reicever. Can you please find...
Gen-Y Iron Grip Anti-Rattle Hitch Pin for 3 Inch Receiver on 2021 Ford F-250 Super Duty
I have a 2021 F-250. The factory hitch is 3”. I use a reducer to fit my 2” ball hitch. Will you product work with my setup ? | The Gen-Y Iron Grip Anti-Rattle Hitch Pin for 2" Hitch Receivers # GY39FR won't be long enough to span the 3" receiver...
Can Gen-Y Pin Box Replace Lippert 1621 SHD 21K for Better Clearance
I have a curtA30 in bed and a Rota-flex pin box having clearance problems I would like to spec out a gen-y pin box can you help me select one I have a 2021 GMC Denali and a Vilano 394RK | Thank you for the information and photo! I was able...
How to Get 3/4 Inch Rise with Brophy Straight Ball Mount
Good Morning I have a hitch that I need 3/4” more height to level trailer out. Can I send pictures to show my challenge? Thanks for your help. | Thanks for the photos! It looks like you have the Brophy Ball Mount for 2" Hitches # BM20 which...
Help Leveling 5TH Wheel Camper After Installing GEN-Y 5TH Wheel To Gooseneck Pin Box Adapter
I purchased this hitch last fall and just had an opportunity to get it installed and hooked up to the truck this weekend. The trailer is much higher in the front than the back. Any suggestions to get it leveled? | It looks like you have the...
Ramp Set that Could be Used with 1997 Ford F-800
I change vehicle from 2001 vw jetta to the ford F250 and then to a Ford 800 and same ramp so up. The guy on the video said vehicle up to 3000# so how could it be the same size for the F800? Thanks | A 1997 Ford F-800 can be pretty heavy based...
Can 21K Gen-Y Executive 5th Wheel to Gooseneck Converter Replace 16K Lippert Turning Point
I have a 2020 Reflections 150 with the 16k Lippert turning point pin box. I pull the fifth wheel with a 2021 Chevy Silverado HD2500 Crew cap 4door 4X4. It has a 6.5 ft bed. Will the GY48GR work for me? | The Gen-Y Hitch Shock Absorbing 5th Wheel...
Gen-Y Hitch 5th Wheel to Gooseneck Pin Box for Forest River Vengeance Rogue 371 With Lippert Rhino
Is this gooseneck compatible with the Rhinobox found on the Vengeance Rogue 371a13? Ive seen that the Reese Goosebox is not compatible and looking for a similar application that will work. | Since you have a Lippert Rhino, the correct Gen-Y...
Recommended Reese Goose Box Adapter for a 5th Wheel Trailer w/ a 1621 Pin Box
I have a 2022 Keystone Cougar half ton 5th wheel, with the Road armor pin box, that has the flex head, on the stickers it shows LCI item # 7996261, RFO # 0008394225, chassis MFG 5-5-22. Will this Goose box fit my RV? I know that this pin box...
Hitch Mounted Spare Tire Carrier Which Allows For Towing a Small Trailer Behind RV Motorhome
I would like to add the spare tire carrier to my 2021 Leisure Travel Van Unity UTB and then tow a 6x10 cargo trailer 1,200 lbs with cargo 1,500 lbs. Will this work? My chassis is built on the Mercedes Sprinter 3500 dually chassis with 5,000...
Purpose of Pin Hole on Side of Gen-Y Ball Mount for 2-1/2" Hitch Receivers
Does the pin hole at the ball end serve any purpose? | Yes, the pin hole you're talking about on the Gen-Y 2-Ball Mount for 2-1/2" Hitch Receivers # 325-GH-064 is actually there so you can turn the ball mount 90-degrees in the hitch receiver...
Troubleshooting Nose-High Towing With A Grand Design Solitude 5th Wheel Trailer
I have a 22 Chevy 3500 SRW, towing a 15k GVWR Solitude 5th wheel, currently using an Andersen Ultimate hitch. My problem is that when towing, the nose of the RV sits high which lowers our clearance in the rear low point being the rear jacks....
Determining The Correct Gen-Y Gooseneck To Pin Box For A 2024 Alliance Paradigm 310
What model Gen-y Gooseneck hitch is recommended for a 2024 Alliance Paradigm 310? | There unfortunately isn't a guide that lists the bolt pattern for your 2024 Alliance Paradigm 310's pin box so you'll need to look and see if there's any stickers...
Is There a Gen-Y Torsion Shank for Weight Distribution Systems
requesting information compatible, first item # 325-GH-1301 Gen-Y Pintle Hook Mounting plate for 2-1/2 inch hitches 16-hole-21K . Question what WD weight distribution equipment is compatible with item # 325-GH-1301 for a smother ride and anti-sway...
Recommended Anti-Rattle Device for a 2 Inch Hitch Using a B&W Tow and Stow
What are the anti-rattle options for this hitch? | The Gen-Y Iron Grip Anti-Rattle Hitch Pin item # GY39FR will work out great with the B&W Tow & Stow item # BW29FR you were looking at. This can be used with any 2" ball mount or accessory. This...
Recommended 2 Inch Hitch Extender w/ a 500 lbs Tongue Weight Capacity
Is there a hitch extender maybe 8 to 12” that would have a TW at 500 lbs? My existing hitch configuration will not allow me to my tailgate it hits my pwr lift and in a tight almost 90 deg. Turn I’ll just trim my trailer with my truck cap...
Hitch Adapter and Bike Rack Recommendation for E-Bike and Flat Towing
Good morning I am looking to purchase an ebike rack 1 lectric 3.0 to carry on the back of my 2019 Winnebago view class C RV. I will need a double reciever 2” hitch with a drop so I can tow my 2018 ford c-max as will as carry the my Bike. ...
Does the Replacement Shank for Gen-Y Adjustable Ball Mount Reduce a Hitches Capacity?
Have a Class 4 hitch on RV if I install GEN-Y 5 inch for a motorcycle carrier how much will it reduce tongue weight capacity ? Thanks | It won't reduce it at all. The Replacement Shank for Gen-Y Adjustable Ball Mount item # 325-GH-503 has a...
Correct Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box for Heartland Big Horn 3250TS
I have a 2008 big country 3250ts that weighs 10500 empty gross 12850 and a tongue wt 2200. Which gen Y hitch should I order when I order? The 21000 or the 30000? | The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box part # GY58GR...
Is the Curt Multipurpose Ball Mount Offered With More Drop
Item D210 has a 2 1/4” . I need a 3 1/4” . Do you have a similar product that would work for me? | The Curt Multipurpose Ball Mount part # D210 is only offered with a 2-1/4" drop which is sort of the kicker with this product. I do have another...
Will the Convert-A-Ball Pintle Hook Combo Work With the Gen-Y Torsion Weight Distribution Shank
Does the included pintle adapter for distribution shank attachment fit on to the Gen-Y hitch? It says it does not fit on other distribution shanks but when I look at the convert a ball distribution shank it seem like it is a standard 2 inch...
Filter Your Search
Contact and Help