Does a 1966 Chevy II with 230 Cubic Inch Straight 6 have Standard or Reverse Fan Rotation
How do I know if I need a reverse direction or not? Stock inline 6 1966 chevy II | If you are standing in front of the car facing the motor check to see which way the fan turns. If it turns clockwise then it is standard rotation. If it turns...
Trailer Hitch for a 1966 Chevy Impala
FRAME ON MY 66 CHEVY BELAIR OUTSIDE TO OUTSIDE MEASURES APPROXIMATELY 50 DO YOU HAVE A UNIVERSAL FIT HITCH THAT I CAN PUT ON THE CAR, BACK IN THE DAY PEOPLE WERE LOT DUMBER, I RECALL SEEING THESE OLD RIDES WITH THE HITCHES MOUNTED TO THE BUMPERS...
Recommendations for Cooling a C4 Transmission in a 1966 Ford Bronco Rock Crawler
I run a c4 in my 66 bronco rockcrawler. I am going to an aluminum radiator with no transmission cooler built into it. I have always ran an exterior cooler as well but feel I might need to add another or up grade. Any suggestions? I run 1 ton...
Compatibility of Derale Transmission Cooler On GM's THM-400 Turbo 400 Transmission
I have a 1966 C20 pickup with the original turbo 400 transmission .will part #D14201 fit my truck ? Will it have a hole for the drain plug and one for a transmission temp sending unit ? Thanks for your help . | The Derale Transmission Cooler...
Temporarily Mounting Trailer Valet 5X Swivel Jack/Trailer Mover on Hinged Trailer Tongue
I have the above valet and use it fine on a 63 airstream 19 footer. I was letting a neighbor use it before he bought one. He has a 17 ft Boston Whaler sitting on a slight incline. The trailer has a swivel fold away tongue. The only place...
Towing Mirror Fit for 1966 Ford F100
Will your review view side extension fit a 1966 Ford F100 pickup with original side mirrors that are round and quite small | The CIPA # 11902 you'd looked at would fit the mirror shown in the provided photo, which is found on 1999-2008 Ford...
Will the MagnaFlow Cat-Back Exhaust System Install on a 1966 Ford Mustang Convertible
Will this system work on a connvertible 66 Mustang? | I spoke with my contact at Magnaflow and he told me that the Cat-Back Exhaust System, # MF15815, will fit the convertible model of the 1966 Ford Mustang with the 4.7L V8, but a slight modification...
Recommended Hitch for a 1966 Chevy C/10 w/ Standard Bumper
I am looking for a Curt tow hitch for my 1966 C/10 chevrolet long bed step side with standard bumper. | To add a hitch to your 1966 Chevy C/10 you will want the Curt Trailer Hitch item # 13028. This hitch fits both the 6' and 8' beds with a...
Trailer Hitch Recommendation for a 1966 Ford F-100 With a Standard Bumper
What is a 10 inch bumper? The notes for this hitch say its for the 66 F-100 with the 10 inch bumper. I have no idea what that is. My truck has the original, steel/chrome, no-step bumper as installed by Ford. Will the Curt 13099 hitch work...
What is the Backspacing of the Dexstar Conventional Steel Wheel Part # AM20758
Can you provide the backspacing dimension for the #AM20758? | The Dexstar Conventional Steel Wheel part # AM20758 has a zero offset which means the mounting surface is centered in the middle of the wheel. The term backspacing refers to the distance...
Where Does Draw-Tite Max-Frame Trailer Hitch Mount on 1966 Ford F-100 Frame
I have a 66 F100 short bed fleetside with a Mustang gas tank where the spare tire was, does this hitch fit inside or outside of the frame? | The Draw-Tite Max-Frame Trailer Hitch # 75034 actually mounts to the underside of the 1966 Ford F-100...
Truck Bed Bike Rack That Isn't Fork Mounted That Works With A 1966 Dodge Pickup
I currently have the Swagman Pickup bike rack with fork mount. Im wondering if I can get the G1025 to convert it to a wheel mount so I dont have to remove the front wheel. | The Replacement Wheel Holder for Swagman G10 Bike Rack # G1025 unfortunately...
How do the Exhaust Hangers of the Magnaflow Catback System # MF15815 for a 1964 Ford Mustang Install
We are installing a 15815 kit on a 64 Mustang 289. The question is how does the rear exhaust braket in the kit attach to the exhaust pipe over the rear axle. The OEM one is completly different with rubber insulators etc. The one supplied is...
Powered Fans to Correct Cooling Issue with 427 Big Block in 1966 Chevrolet Chevelle SS
Have a 66 Chevelle SS with 450HP 427, auto trans, new 160 thermostat, and aluminum radiator and dual fan setup I believe to be by Champion. Just bought the car. Dont know the CFM of the fans, but they appear pretty small. The engine runs VERY...
Can the Aluminum J-Channel Trim for Enclosed Trailers Bend
Is this soft j-rail and easily formable | The J-Channel Trim for Enclosed Trailer part # 362415-955 is made of aluminium which is a very soft metal so yes it could be bent or conformed to a certain shape if needed. However, if you need to make...
Will Dexstar Rim AM20304 Match Existing Rims For 1966 Plymouth Satellite
Can the Dexstar AM20304 rim be used on a 1966 Satellite to match existing rims? | As long as the bolt pattern (5 on 4-1/2 inches) and offset (+.5 inches) fit then it should work. I would certainly double check your measurements and keep in...
Parts Needed to Flat Tow a 1966 Volvo 122S Wagon Behind a 2017 Honda Ridgeline
Flat Towing 1966 Volvo 122S Wagon Behind 2017 Honda Ridgeline I have an old Volvo I wish to tow behind a new Honda Ridgeline that has a tow kit, including a 2 inch ball. The journey is about 1000 miles with a vertical climb of nearly 9000...
Replacement Radiator Fan For 1966 Oldsmobile 442 To Help With Overheating on Highway
Can you explain what reverse rotation means and what it does. I’m looking for a fan that will keep my car cooler on the highway. It runs fine in the city but runs hotter on the highways. It’s only a 4 blade fan which are 4 inches wide. Will...
Dimensions of the Westin Fey Diamondstep Rear Bumper item # 20002
Will item # 20002 fit a lill 66 ford bronk? I have not measured it yet had since 82 but it takes a 53 inch long bench seat in the cab. | The Westin Fey Diamondstep Rear Bumper item # 20002 fits 30 years of Ford and Chevy Trucks from 1967-98....
Trailer Hitch Options For A 1966 Dodge Charger
Do you have a Class III trailer hitch that will fit a 1966 Dodge Charger? | Though we do not have a custom trailer hitch that is confirmed to fit your 1966 Dodge Charger we do have a universal hitch that may work for your vehicle. The Draw-Tite...
Replacement Wheels for 1966 Chevy C/K Series Pickup That Accept 10-1/8 Inch Hub Caps
I need replacement wheels for my 1966 Chevrolet C10. 15 Inch 5 inch wide I believe 6 lug on 5.5 inches. All I see on your site is 6 inch wide. I want to run my stock hubcaps which are 10 1/8 inch dog dish type hubcaps. Can you tell me what...
Will Dexstar Conventional Steel Wheels Work With Disc Brakes
do these dextar rims youre selling for the trailers clear disk brakes or are these drum brake rims? | The Dexstar Conventional Steel Wheel - 15" x 6" Rim - 6 on 5-1/2 - Black Powder Coat # AM20514 work with both drum and disc brakes. As long...
Determining Which Trailer Hitch Receiver Will Fit A 1966 Chevrolet P10 Panel Truck
Hi, I am looking for a trailer hitch for my 1966 Chevy Panel Truck P10 it has the same wheel base as a 1966 Chevy short bed C-10 pickup truck. My question is will the hitch for pickup truck work on my truck without any modifications? ...
Hitch, Brake Controller and 7-Way Trailer Connector for 1966 Ford F-250
Hello, Im needing recommendations for adding brake controller and hitch to 1966 Ford F250, Im going to be towing a 2-horse trailer that weighs 3200 lbs and tongue weight 200. It currently has 7 pin on it that is frayed and I need to replace...
Filter Your Search
Contact and Help