Does Curt Hitch # C13235 Fit 2001 Isuzu Rodeo Sport
Will the C13235 fit a 2001 Isuzu Rodeo Sport ? The website did not appear to mention this particular model - thanks | Yes, the Curt hitch part # C13235 that you referenced does fit your 2001 Isuzu Rodeo Sport. |
Compatible Hitch for 2001 Isuzu Rodeo Sport Amigo
Will this fit a 2001 isuzu Rodeo sport aka amigo | The Curt # C13222 is not a fit for the 2001 Isuzu Rodeo Sport. We currently do not have a hitch that fits your vehicle. If you want to carry bikes or cargo, you could add the SeaSucker Monkey...
How Do You Connect 4-Way Flat Connector In Rear Cargo To Added 7-Way On a 2010 Mazda CX-7?
I am wanting to install a 7 pole harness on my 2010 Mazda cx7. Looking at the site the process requires installing a 4 pole harness and then a 4 pole to 7 pole adapter. The thing is the 4 pole looks it connects out the bottom the the back hatch...
Fit of Thule Passage TH910XT Trunk Mount Bike Rack on 2012 Mazda 3 Sedan
Would this bike rack work for a Mazda 3 and if not could you recommend one that would work? | The Thule Passage trunk mounted 2 bike rack you referenced, part # TH910XT is indeed a fit for your 2012 Mazda 3 Sport Sedan. I have confirmed this...
Recommended Supplemental Braking System for a 2004 Isuzu Rodeo Behind an FR3 Motorhome
I just bought a 34 ft FR3 and has a 2004 Isuzu rodeo he wants to tow. Asking for suggestions/recommendations on which braking system to get. Thanks for any help. | The supplemental braking system that I recommend for your 2004 Isuzu Rodeo being...
Troubleshooting Trailer Wiring When Connecting a 4 Flat Vehicle Side to 4 Flat-5 Wire Trailer
I have a 2001 Isuzu Rodeo and was recently trying to connect the connector wires to my trailer. My Rodeo is setup to use a 4 flat female end that runs to 4 wires Ground, Tail, L Turn, R Turn to a converter that connects the 4 wires of the end...
Trailer hitch for a 2004 Isuzu Rodeo with 3.5 Liter Engine
my is 2004 rodeo 3.5 liters wish i will use | The only trailer hitch that will fit the 2004 Isuzu Rodeo with 3.5 liter motor is Curt hitch # C13235. But in order for this hitch to fit your Rodeo must have the rear door mounted spare tire. It...
Is the Curt Cam Buckle Stabilizing Strap Required for the Draw-Tite Max-Frame Trailer Hitch Receiver
Hi, I just wanted to verify if there was any requirement for a stabilizer strap for a bike rack with the Draw Tite 75512 - 2inch trailer hitch I saw that the Curt hitch did have this requirement. We will be using a Thule Hitching Post Pro and...
Which Trailer Hitches, Ball Mount, Trailer Wiring, and Hitch Balls Fit a 2007 Mazda CX-7
This show a 2010 model year installation - will part 75512 fit my 2007 Mazda CX-7? | Yes. The Draw-Tite Trailer Hitch, # 75512, will fit on your 2007 Mazda CX-7. For many vehicles, the manufacturer will not change the chassis and/or frame platform...
How to Wire 3 Function Tail Light Connection
The tail light assembly on my 5 X 10 utility trailer has a red wire and a black wire. The ground is through the mounting bolts. It uses a 2 element bulb. Black is the upper element. Red is the lower element. Which wire do I hook the signal/brake...
Better Clearance to Carry Trailer Hitch Mount Wheelchair Carrier on 2011 Mazda CX-7
I have a 2011 Mazda CX-7 with a 2 inch hitch. I have a cargo carrier with a ramp transport lawn mower, snowblower, etc that folds up from you about a year ago. When I fold-up the cargo carrier it does not quite clear my back bumper. Additionally,...
How to Carry Bike with Alternative Frame Using a 2000 Isuzu Rodeo with Spare Tire
Will this one work? The rear window is glass... The extra wheel is mounted under the vehicle. II have no trailer hitch and as a single female, cant lift bike overhead for roof rack. That pretty much leaves trunk mount, but with the glass, not...
Right Side Trailer Lights Not Working on Trailer Towed by a 2011 Mazda CX-7
I installed this module per the instructions and the passenger side of the trailer tail lights do not work. The running light on that side works fine. I checked the light itself for functionality and it works solo. Any ideas? | This sounds like...
Estimated Install Time for B & W Turnover Ball Gooseneck Hitch # BWGNRK1104
looking for install time on a BandW hitch #BWGNRK1104, usually listed on your website. Do you know how long? | The B & W Turnover Ball you mentioned, part # BWGNRK1104 has an estimated 2 hour installation time when installed by a professional....
Hitch and Expandable Bike Rack Recommendations for a 2008 Mazda CX-7
I do not have a hitch on my car yet. Id like to get a 2-bike platform rack like the Thule T2, or Kuat NV, etc that has the option to add a 2-bike extension. The only racks Ive noticed that offer this option are the ones that mate up to Class...
Can a 3-Wire to 2-Wire Trailer Wiring Harness Converter be Bypassed
can i by-pass a 3 to 2 wire taillight converter in any way | The only way to bypass a 3-wire to 2-wire trailer wiring harness converter (assuming your vehicle has a 3-wire or separate tail light system) would be to convert your trailer to a...
Largest Trailer Hitch Receiver For 2010 Mazda CX-7
Can you get a trailer hitch with a 4 inch receiver for a 2010 Mazda CX-7. | A 4 inch trailer hitch receiver is not available for a 2010 Mazda CX-7, or for any vehicle that I am aware of. The largest hitch that fits a '10 CX-7 has a 2 inch receiver: -...
Locking Hitch Pin Recommendation for the Thule Vertex Bike Rack
hello, will item HE6033 work for the thule vertex bike rack? | I do have a threaded, locking hitch pin for your Thule Vertex bike rack, but the Heininger Threaded Hitch Pin, # HE6033, will not work with the Vertex bike rack because the threaded...
Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire
I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...
Does Saris Bones Hitch Bike Rack Attach to Trailer Hitch or Ball Mount
Does this need a ball mount? | The Saris Bones Hitch 2 Bike Rack # SA882 installs directly to a trailer hitch and would not need a ball mount at all. Since there is sometimes confusion on which part is the "hitch" and which is the ball mount...
Will the SportRack Vista XL Cargo Box Fit a 2011 Mazda CX-7 with Factory Roof Rack
We have a 2011 Mazda CX7 with factory cross bars @ 27.5 inches apart. The cross bars are fixed. Will this box work with our setup? Thanks | The crossbars on your 2011 Mazda CX7 are within the mounting range, 25-7/8", 27-7/8", or 29-7/8"...
How Do Brakes Get Power With a 4-Way to 7-Way Adapter
Where does the power to the brakes come from if I only have a 4-way flat to 7 way installed? | It sounds like you have a 4-way connection on your vehicle and added a 7-way adapter like the Curt Trailer Connector Adapter # C57672. Plugging your...
How to Install the Alpena LED Fog Litz 4 Part # ALP77160 with a Toggle Switch
How do I install these so that they will work only when my low beam is in use? Thank you. | I do have a way for you to install the Alpena LED Fog Litz 4 part # ALP77160 on your 2010 Mazda CX-7 but unfortunately I cannot recommend you use them...
Correct Wiring Harness for 2010 Mazda CX-7 Without Tow Package
I have a base model CX7 sv. It does not have an optional towing package, however it does have the female port on the passenger side of the car as shown in your video for part C55593. Is this port now standard? I was looking at part 118405 until...
Filter Your Search
Contact and Help