Which Trailer Hitches, Ball Mount, Trailer Wiring, and Hitch Balls Fit a 2007 Mazda CX-7

Published 04/30/2010

Products Featured in This Question

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(96)

$222.75

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(258)

$68.06

1-7/8" Hitch Ball - 3/4" Diameter x 2-3/8" Long Shank - Chrome - 2,000 lbs

(2621)

$14.79

2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs

(2621)

$18.47

Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs

(2330)

$30.74

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(13)

$35.56

Question:

This show a 2010 model year installation - will part 75512 fit my 2007 Mazda CX-7?

asked by: Cindy P

Expert Reply:

Yes. The Draw-Tite Trailer Hitch, # 75512, will fit on your 2007 Mazda CX-7. For many vehicles, the manufacturer will not change the chassis and/or frame platform so the same hitch can fit multiple years of the same model vehicle. I have included two links below. One is the instructions for the 75512 hitch. The other link is for all the hitches that will fit your 2007 CX-7.

I also recommend adding trailer wiring to provide a 4-Way trailer connection at the rear of the vehicle. If you do not have a factory tow package, use Tow Ready Custom Fit Vehicle Wiring, # 118405. I have included a link to the installation details below. If you do have a factory tow package, you will need the Tow Package Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, # C55593. Installation details are linked below.

The recommended ball mount is # 36061 and you can use hitch balls # 19257 (1-7/8 inch diameter) or # 19258 (2 inch diameter).