Roadmaster XL or EX Base Plate Kit and Other Parts Needed to Flat Tow a 2010 Chevrolet HHR
I have questions about the Roadmaster XL kit over the Roadmaster EZ base plate kit? Also do you sell the wiring kit so the taillights work when towing my car behind the motor home? Thanks | The Roadmaster Crossbar-Style Base Plate Kit (XL)...
Trailer Hitch Receiver For 2011 Chevy HHR For Use With 2 Inch Bike Rack
Looking for a trailer hitch for a 2011 Chevrolet Hhr To accommodate my bike rack the trailer hitch that Etrailer recommends has a 1 1/4 opening and my bike rack needs a 2 inch opening any suggastions | The only trailer hitch receiver for your...
What Wiring Kit and Diodes are Needed When Flat Towing a 2010 Chevrolet HHR
What wiring kit and diodes do I use on my 2010 HHR? What is the cost? Where do I order them? | Your 2010 Chevrolet HHR has a 2-Way (combined) wiring system which means the brake and turn signals are sent along the same wire. If you will be...
Is Braking System Really Needed To Flat Tow Small Chevy HHR Behind Motorhome
Do I really need a brake buddy to tow a 3,000 HHR behind my F53 class A Georgie Boy. | Even for a lighter vehicle like your Chevy HHR that weighs just about 3,000 pounds, a supplemental braking system like the Brake Buddy Classic 3 # HM39494...
Recommended Trailer Wiring Harness for 2007 Chevrolet HHR
Do you have a wiring kit that goes from my 2007 Chevy HHR to the trailer if so how much | The trailer wiring harness I recommend for your 2007 Chevrolet HHR is the Tow Ready T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118407....
Will the Thule Passage 2 Bike Carrier - Trunk Mount, # TH910XT Fit a 2008 Chevy HHR
trunck bike rack for 2008 chevy hhr | According to Thule, the Passage 2 Bike Carrier - Trunk Mount, # TH910XT, will fit your 2008 Chevy HHR. I have included a link to a video review of this rack below. You might also be interested in the Alternative...
Bike Rack for Use with a Roadmaster Dual Hitch Receiver Adapter and ReadyBrake Elite Tow Bar
Towing a car behind the motorhome using a ReadyBrake Elite system. With this dual receiver, what bike rack would you recommend where I can keep the bike rack in place and still fold the ReadyBrake tow bar forward and down to put it into the...
What Comes with Blue Ox Base Plate Hardware Kit # 63-3127
hello i would like to have the confirmation that see with the kit of bolt also if it is possible in how many times could I receive it thank you | I attached a picture that shows all of the hardware that comes with the # 63-3127 that you referenced....
Does the Air Force One Brake System Come with Everything Needed for the Installation
I just want to know if SM99243 would be a complete kit with everything needed to install in a non specific vehicle, or is this just one side of the system and will still need a kit in the vehicle being towed as well. From the Photos of this...
How To Confirm Wheel Bolt Pattern for 215/75-14 Tire and Wheel
I am trying to buy a wheel and tire for a trailer. Im puzzled about the bolt pattern measurement. I currently have a Load Star ST215/75D14 tire on the trailer. The wheel is a 5 bolt. I think it is a 4.5 but am not sure. How would you recommend...
Recommended Roof Rack With Yakima HD Crossbars for 2018 Mazda CX-5
I have a 2018 CX-5 with a bare roof. Really like the Yakima with HD crossbars. The spot for a hook in the crossbars would be great for strapping down a couple pipes or 2x4 lumber. Or another brand with similar crossbars? | For your 2018 Mazda...
Correct Trailer Hitch for 2014 Mercedes-Benz CLA250 All Models and How To Convert To 2
Vehicle: 2014 Mercedes-Benz CLA-Class I am interested in a hitch for a 2014 mercedes benz CLA 250 4 matic. Before I order I want to make certain that its the proper part. Will the C12163 be the correct hitch? Also need a 1.25 to 2 adaptor to...
Correct TorkLift Frame-Mounted Camper Tie-Downs for a 2018 Ram 3500 Dually Crew Cab Factory Air
Vehicle: 2018 Ram 3500 I have a 2018 Ram 3500 8 box, dually, no boards under the box, factory hitch and max tow factory air bags. I bought a slide in camper. looking at torklift TLD2124 and TLD3109 for tie downs. However it says that the TLD3109...
Recommended Hitch Reducer for 2" to 1-1/4"
Vehicle: 2020 Subaru Forester Do you have a product that s into a 2 trailer hitch receiver and converts it down to a 1 1/4 receiver? If so, please provide me with a product number and price on the item. Thank you | Yes, the Brophy Hitch Reducer...
Parts Needed to Flat Tow 2008 Chevy HHR
Have a 2008 chevy HHR with a brake buddy have bypass switch and Hopkins wiring kit 56100 what else do I need? Do I need the brake switch 751428 and 12 volt outlet and brake relay | You will need a base plate on your 2008 Chevy HHR to flat...
Parts Needed to Flat Tow a 2011 Chevy HHR Equipped with the Roadmaster Base Plate Kit # 3141-1
I just bought a 2011 Chevrolet HHR which has the base plate 3141-1 already installed. It does not have the removable arms or cross bar. Can I purchase the arms separately and do I need the cross bar? I think Ive seen some tow bars connected...
How to Add a 4-Way Flat Connector to the Roadmaster Falcon Towing Combo Kit
CAN I get tow bar RM-522 with a 4 flat pug connector. I plan on not wiring my vehicle. I will use the portable lighting kit. | The Roadmaster Falcon towing combo kit, # RM-9243-1, includes the round 4 pin trailer connector only. For a 4 pin...
How Long Does It Take to Install Roadmaster Crossbar-Style Base Plate Kit on 2009 Chevy HHR
Could you please tell me what the estimated installation time for this base plate is? I live in Ohio, so it would need to be done locally. Thank you! | The Roadmaster Crossbar-Style Base Plate Kit part # 3141-1 which is a fit for a 2009 Chevrolet...
Replacement Hardware For A Draw-Tite Trailer Hitch For My 2009 Chevrolet HHR
i need the mounting hardware to mount the hitch on a 2009 Chevrolet HHR. Can you help me. My hitch is made by Draw Tite. | You need the replacement hardware kit for the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4",...
High Capacity Roof Rack Recommendation for 2009 Chevy HHR
Hi how are u I’m looking for a universal roof rack for a Chevrolet HHR 2009 . Please let me know which one is the the best I need it for my cargo of boxes I carry for work .. it have too be heavy duty thanks | The roof rack that fits your 2009...
Parts Needed to Flat Tow 2009 Chevy HHR
I am starting with nothing and need help choosing components. The items I am most interested in is from Blue Ox. Aventa BX 4370 Patriot BLU37TR Base Plate ???? Wiring kit so HHR lights work Safety cables Coiled wire connection ????? Motorhome...
Replacement Actuator Cable For A Demco SBS Stay-IN-Play Duo In A 2010 Chevrolet HHR
I have a Demco sbs stay-in-play DUO and the actuator cable has snapped. Is there a replacement part? | For your Demco SBS Stay-IN-Play DUO Supplemental Braking System # SM99251, you can use the: -Replacement Cylinder Cable for Demco Stay-IN-Play...
Differences Between Trailer Hitch Receivers for a 2008 Chevrolet HHR LT1
hhr 2008 hitch. what are the difference in the models i have an 2008 hhr lt1 | The differences between the Draw-Tite # 24756 and the Curt # C11447 trailer hitches for your 2008 Chevrolet HHR are that the Draw-Tite has a welded tab that keeps...
How to Use the Lights of My 2006 Chevrolet HHR on a Tow Dolly Behind an RV
I PULL A CAR TOW DOLLY which I plug into the flat 4 connector on my motorhome which is on an F 53 chassis. THE dolly has a flat 4 wired to the brake and turn signals. If I wire my 2006 chevy hhr with the C55432 and plug the flat 4 from it into...
Filter Your Search
Contact and Help