Hitch Adapter To Convert 1-/4" Hitch Receiver To 2" And Increase Ground Clearance By 5"
I have a Drawtight 24871 hitch on my 2014 chrysler 200 1-1/4 in. receiver, Thule bike rack 2”, and straight reducer/adapter to fit both sizes. Trouble is rack drags on incline! I need an adapter that curls up to avoid the drag! I saw two on...
Roof Rack, Bike Rack, and Fairing Recommendations for a 1991 Audi 200 Wagon with Factory Side Rails
1991 Audi 200 wagon The car has factory round rails from front to back. Ive been searching for a rack that would attach to the factory rails and came upon your site. I was happy to see the SR1098 and that it just may fit my oddball car. ...
Recommended Way to Tow a Electric Wheelchair with a 2013 Chrysler 200 Sedan or Convertible
I need a carrier for a electric wheelchair for a 2013 Chrysler 200. What would be my best option? | The most popular hitch for a 2013 Chrysler 200 Sedan or Convertible is the Curt Class I trailer hitch # C11133. I wouldn't recommended using...
Routing the Power Wire for Trailer Wiring Harness on a 2014 Chrysler 200
How do we get the main wiring that runs to the battery for power. Is there a pass through area.I saw a reply from another question about this product I believe where you running the power line along with the brake lines under the vehicle. My...
Is Light Kit Needed For 2015 Chrysler 200 When Using Tow Dolly
I am going to tow my 2015 chrysler200 on a tow dolly. can I tap into my tail lights or do I need a diode kit like part number 38955? what would happen if I need the kit and didnt use it? | So when using a tow dolly for your 2015 Chrysler 200,...
Parts Needed to Flat Tow 2012 Chrysler 200 Convertible
will this work on a 2012 Chrysler 200 convertible | I did check with Roadmaster and the Roadmaster EZ4 Base Plate Kit # RM-52297-4 that you referenced is only a fit for the sedan version of the Chrysler 200. It will not work with the 200 convertible....
Trailer Hitch Recommendation for a 2012 Chrysler 200 Convertible
The hitch Im looking at is for the Chrysler 200. I have the 200 convertible . Are they the same ? | There is a confirmed fit for a 2012 Chrysler 200 convertible and it is Curt Hitch # C11133. The Draw-Tite hitch is not yet a confirmed fit....
Best Trunk Bike Rack Recommendation for a 2011 Chrysler 200 Convertible
Could you please tell me what would be the best trunk bike rack for a 2011 chrysler 200 convertible. We would like one that is easy to install and one that wont scratch the paint on our car. Thank you for your help. | The best trunk rack around...
Curt Trailer Hitch Fit Recommendation for 2014 Chrysler 200
Have 2014 Chrysler 200 was trying figure out if this hitch fits | I have a hitch that is designed as a fit for your 2014 Chrysler 200, but the one you mentioned is not so it would not fit. Instead you would want the part # C11133 which is a...
How To Choose Correct Bearing Buddy for Tractor Supply Small Utility Trailer
I measured the hub and ordered the Bearing Buddy that measured 1.968. That is a little bit too small. Is Bearing Buddy that measures 1.980 the best option for this hub? | The correct Bearing Buddy Bearing Protector like part # BB1980A will be...
Trailer Hitch and Wiring Harness Recommendation for 2013 Chrysler 200
Hi I have a 2013 Chrysler 200 convertible. I would like to install and purchase a carrier of some sort for a Permobil C300 wheelchair. Are you able to help me out by letting me know what products I would need to purchase. I will need to install...
Compatibility of Curt Class I Hitch # C11133 with Dual Exhaust Model 2013 Chrysler 200 Limited
The 2013 Chrysler 200 Limited has twin exhaust pipes. Is this a problem with the installation of this hitch? | The installation instructions for the Curt Class I receiver # C11133 specifically mention the procedure for installing the hitch...
Why is the Spindle Nut Not Included with the Hub Assembly
So these hubs go directly on the existing spindles of the mobile home axle and use same spindle nut and cotter pin that was on it? What about the back behind where this new hub sets in place, are there something you need to put there so that...
Available Hitch Adapter to Allow Use of 2-Inch Bike Rack in 1-1/4-Inch Class I Hitch
P/N - MT70032 I have a 2015 Chrysler 200 that has a class 1 hitch which is 1 1/4in, my bike rake need a 2 in. will the MT70032 work for this application. Does the adapter change or increase any of the weight limits on the hitch. | Use of any...
Carrying Snowboards on a Trailer Hitch or Roof Rack for a 2012 Chrysler 200
I was contemplating the snowboard attachment for my Chrysler 200. I would need the hith, but I am not sure what bike rack I would have to purchase. I noticed tho profile on the video was quite high which is okay for an SUV but would be akward...
WeatherTech Floor Mats for 2012 Chrysler 200 and 300
You say your mats fit all cars. Does his include the Chrysler 300 - Limited? | Do you have a Chrysler 300 or a 200? The McNeil Weathertech # WT454031 front floor mats in Tan that you referenced are a fit for all models of the 2012 and 2013...
Trailer Hitch for a 2015 Chrysler 200
Do you have a pdf file I could view to determine the process for installing a Hidden Hitchinch or Draw Tight trailer hitch on a 2015 Chrysler 200? I would like to see the difficulty of this installation prior to ordering. Thank You | Yes, I...
Recommended Trailer Hitch Receiver, Ball Mount and Wiring For a 2013 Chrysler 200
Im using the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4inch # C11133 purchased from etrailer.com with my 2013 Chrysler 200. Im hoping to pull a small trailer. Specifically the Uhaul 4x7 Utility Trailer with an empty weight of...
Installation Of Curt DaLan Class I Trailer Hitch Receiver , # 257203, On 1991 Audi 200 Wagon
How much cutting, bending or modifying is there to install the hitch on my wagon. Do you have a tech sheet showing just how much will have to be done to install it? Thank you for your help. | No cutting or bending is needed to install the Curt...
Troubleshooting Carriage Bolt that Keeps Turning When Installing Draw Tite 24919
I just installed a Draw Tite hitch on my 2014 Chrysler 200 with twin exhaust pipes, when I tried to tighten one of the bolts the bolt just kept turning with the nut once it was tightened. So I could not torque it. BTW Its much harder to put...
Husky WeatherBeater Floor Mats for a 2016 Chrysler 200s
Will this Husky WeatherBeater floor mat set front and back guarantee to fit my 2016 Chrysler 200s? | For the 2016 Chrysler 200 you would need a different set of Husky Weatherbeater mats; # HL99071. They fit both convertible and sedan models...
Replacement Bike Rack Cradle For A Rhode Gear Bike Rack
Do you carry any replacement cradles that will fit a 7/8inch diameter tube as I have on an older Rhode Gear 2-bike Hitch Shuttle rack? Thanks! | When it comes to the replacement cradles for your Rhode Gear 2 Bike Rack The Replacement Cradle...
How Much of Curt Hitch part # C11133 is Visible Installed on 2011 Chrysler 200
Is the body of the hitch hidden behind the bumper so that all you see is the actual hitch? This is on a 2011 Chrysler 200 Convertible. | When the Curt hitch part # C11133 is installed on a 2011 Chrysler 200 convertible the only portion of the...
Trailer Hitch and Wiring for a 2012 Chrysler 200
Can I use this hitch on my Chrysler 200 to tow a small pop up camper? | Draw-Tite trailer hitch # 24871 for the 2012 Chrysler 200 is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight. Provided that the trailer is within...
Filter Your Search
Contact and Help