Recommended Trailer Hitch Receiver, Ball Mount and Wiring For a 2013 Chrysler 200

Published 04/23/2022

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(56)

$197.09

1-7/8" Hitch Ball - 3/4" Diameter x 1-5/8" Long Shank - Chrome - 2,000 lbs

(3914)

$12.89

2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs

(3914)

$10.70

Curt Class II Drawbar - 3-1/8" Rise - 11-1/4" Long - 3,500 lbs

(2282)

$43.24

Curt Class II Euro Style Drawbar with 1-7/8" Ball - 5-1/8" Rise - 3,500 lbs

(391)

$42.94

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(21)

$62.01

Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span

(2948)

$3.42

Question:

Im using the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4inch # C11133 purchased from etrailer.com with my 2013 Chrysler 200. Im hoping to pull a small trailer. Specifically the Uhaul 4x7 Utility Trailer with an empty weight of 630 lbs to move light furniture and supplies from the home depot on occasion. Uhaul requires a 1-7/8inch or, 2inch hitch ball 2,000 lbs. minimum. Im not sure what the correct Hitch Ball and Drawbar is to purchase. Also to be safe, what is the max load I can use in this configuration, so I dont do anything unsafe. Thanks!

asked by: Michael

Expert Reply:

With the Curt Trailer Hitch Receiver # C11133 on your 2013 Chrysler 200, Curt recommends using one of the following ball mounts.

First is the Curt Class II Drawbar # C45522 with either a 1-7/8" Ball # C40001 or 2" Ball # C40018. Or you can choose one of their Euro Style Ball Mounts with a 1-7/8" # C45591 or 2" # C45592 ball. Whichever you choose you will need a Curt Hitch Pin and Clip # F-4 to secure it in your receiver.

You will also need a Vehicle Wiring Harness # C56211 to control the tail lights on the trailer.

According to the owners manual for your Chrysler you should not tow more than 1,000lbs or exceed 100lbs of tongue weight.