!Outback Wagon x > Yellowstone Motorhome x > XC60 Recharge x > Pickup x >

Installation and Fit of the Westin Diamondstep Replacement Step Bumper on a 1987 Nissan Pickup

does this bumper come with any hardware lights,wires, or bumper brackets will it fit a 1987 4wd truck? | The Westin Diamondstep Replacement Step Bumper, item # 66000, does not come with installation hardware and is designed to be installed...

Troubleshooting Trailer with Non-Functioning Turn Signal Lights Behind a 1992 Toyota Pickup

1992 Toyota pickup. Installed connector #118379, brake lights and running lights work great, however the turn signals dont transfer to the trailer. Did I order the wrong connector? Appreciate any help with this. | This is the right harness...

Trailer Hitch For A 1991 Toyota 4x4 Truck

Do you have a front receiver hitch for a 91 Toyota 4x4 truck, std cab, short bed, 4cyl, 5 speed? If you do carry them are they in stock? Thanks | We do have trailer hitches available for your 1991 Toyota Pickup but we do not have a front mount...

Installation of Trailer Tail Light Kit # TL5RK

I have never done this before and am also new to wiring/electrical and have 2 questions: 1. when I hook up the side marker lights, do I just cut one of the wires I think the brown? that runs back to the tail light, then expose each end, and...

Air Bag Helper Springs for a Lowered 1992 Toyota Pickup with 8.5 Inches Between Springs and Frame

What would be the best air bag suspension for my truck if it has a 3 inch lowering block and it is at exactly at 8.5 inches from the top of the leaf spring to the bottom of the frame? | Air Lift SlamAir kit # AL59102 is the one you will want...

Dimensions Of Universal Hand Winch Right Angle Mounting Bracket

What are the dimensions of the Universal Hand Winch Right Angle Mounting bracket and whats the best way to install it on this trailer with bolts? Are more support brackets or rods needed to attach this mounting bracket to the trailer to strengthen...

Adapting Universal Hand Winch Right Angle Mounting Bracket

I would like to mount the winch to the top rail. Do you offer this type of mounting bracket or can tell me how I can utilize this part to make a similar mounting bracket without welding? | You might be able to adapt the mounting method on your...

Base Plate Recommendation for a 1985 Toyota Pickup 4x4

Sir, Will this base plate fit my 1985 | As long as your 1985 Toyota Pickup 4x4 has front leaf springs the Roadmaster Classic Base Plate Kit # 1123-1 would be the correct base plate kit for you. If you do not have front leaf springs you would...

Wiring a 1998 Nissan Pickup for Trailer Light Wiring

How do I wire my 1998 Nissan pickup that has seprate turn signals orange lights from the tail light and brake light red lights to my trailer that has a two light system? | You will need to use a wiring harness with a converter to convert your...

Will Detail K2 Snowplow And Mounting Brackets Fit 1983 Toyota 4X4 Pickup

Am I correct in assuming that this plow/mounting brackets will work on a 83 Toyota 4x4 pickup? | The Detail K2 Rampage II Snowplow, part # K2RAMP8219, and Custom Mounting Brackets, part # K285100 are a fit for your 1983 Toyota pickup. This...

Recommended Roof Rack Compatible with 1997 Nissan Extended Cab Pickup

Will the Sport Rack # SR1004 mount to the back vent windows of a 1997 Nissan pickup extended cab? | The SportRack Semi-Custom Roof Rack SR1004 is no longer available as the manufacturer discontinued it. However, it was a confirmed fit for your...

Axle Information Needed To Find The Correct Brake Assembly For Your Axle/Trailer

Good Morning! I am trying to find good brakes for my tandam boat trailer the boat is about 4,000 lbs and would like brakes that work when in reverse what would you recommend? | When the brakes are engaged, the rotating assembly will stop or...

Ladder Rack for Bed of 1989 Toyota 4x4 Pickup

HI Will your rack fit my 1989 Toyota 4x4 Pickup? The bed is 60x77 and the 21 from the bed to the top of the cab. Thanks! | For your 1989 Toyota Pickup the closest ladder rack we have to the Erickon # EM07707 that you referenced that's a confirmed...

Snow Plow Mount Recommendation for 1991 Toyota 4x4 For Detail K2 Rampage Plow

Do I need a special mounting kit for a 1991 Toyota 4x4? How much is it? | Yes, to use the K2 snow plow part # K2RAMP8219 that you referenced on your 1992 Toyota Truck 4x4 you would need the plow install hardware part # K285105. Prices are...

Installation of SeaSucker Monkey Bar Roof Rack for Naked Roofs

Please explain to me how the rack system mounts to my 1990 2 door xtra cab toyota pickup. | The SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long # 298-SX6000B for your 1990 Toyota Pickup Roof Rack will simply attach to the naked...

Can the Detail K2 Rampage II Snowplow be Used on Gravel and with a Lifted Vehicle

Hi, Ive been trying to find a plow that will fit my small pickup and this may be it. A few questions. Will this work on a gravel road? My road is probably less than a tenth of a mile in length and about 8-10 feet wide. It has two long straight...

Towing Capacity and Parts Needed to Tow a Trailer with a 1996 Nissan Pickup XE

Dear etrailer experts: I have a 1996 Nissan XE pickup truck, its 4 cyl. 4x2, 5 speed manual transmission. Im interested in pulling a lite travel trailer. What products do I need to ready my truck and how big of a travel trailer can I pull? ...

How To Install the Advent Air RV Air Conditioner On Roof Less Than 2-1/2" Thick

Im taking out my old unit and noticed the opening is 14.5 X 14.5 and the roof is only 2- 2.5 inches thick...... Do i need an adapter for this size and thin roof ? | The Advent Air RV Air Conditioner w/ Air Distribution Box and Start Capacitor...

Can Hopkins Tail Light Converter Kit Be Used for Combined Tail Lights on Motorcycle

Would this part work as a brake light converter? I have a 74 honda cb750 and am installing new lights 2 dual brightness led lights, 3 wires each low, bright, and ground and would like a way to wire them as the tail, turn, and brake lights. Bike...

Trailer Wiring 4-Way Recommendation for 1984 Toyota Pickup

I have a 1984 4x4 pickup I am putting a flatbed on. I am wanting to run single trailer lights on the back. What conversion do I need? | Sounds like you are looking for a 4-way for your 1984 Toyota Pickup. For that we have the Curt Kit part...

Can E-Track Attach Directly to Wood Floor with Wood Screws

I have a 16inch Car trailer with a wood floor. I need to double check how to install so, that it will be the most secure it can be. I installed using wood screws in all the holes. Is there anything else I need to do? | If you wanted to install...

Troubleshooting a Pinched 4-way Trailer Wire Where Only the Running Lights Function

Installed and all worked well. Pinched/nicked the wires near the vehicle end when I cornered too tight - spliced them back and now only the running lights work. No turns, no brake, no emergency flashers. Any ideas? | It sounds like you may still...

Running Lights Not Working on Trailer

I just purchased item number 118379, the tekonsha trailer wiring kit. The turn signals work but the running lights do not work the emergency signals work also. What would you suggest I check? | For starters, you will want to turn the vehicle...