Available Sizes of Hub Dust Cap Close to 2-Inch Diameter
I have one hub that is different than the other which is 51.2 mm. I cant find a dust cap to replace the one I lost which will fit. Any ideas? | In an E-Z Lube hub dustcap like # DC200L-DCRP the size nearest to your required 51.2 mm size (2.01-inch)...
Can the Spring Seats On a Dexter 2,200 Lb Axle Be Moved and Re-Welded
I have 53.5 inches from center to center on my springs, I need 72 inches from hub face to hub face. the 2200 axle you all have has the seat at 58 inch center can I move in to the 53.5 inch center. I have to get out past an older beam that was...
Grease Cap for a Kodiak Hub-and-Rotor Assembly
What cap will fit with this hub/rotor assembly? - Item # KHR10D Should I get the EX Lube Drive in with Plug or Bearing Buddy? | For the Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs item # KHR10D you will want the 2"...
Replacement Hub and Drum Assembly and Electrics Brakes for a Dexter P-11 SLR Axle
Hello, I have a 16ft open center car trailer, dual axle, dual electric drum brake, model and brand are a little unknown. Anyway it has DEXTER P-11 SLR model axles, I measured the bolt pattern, came out as a 5 on 4 1/2. I want to replace hub...
Replacement Grease Seals for Dexter 6K Trailer Hub
I see you have this seal, but another page on you web site says use #RG06-070 . This is for a 6k dexter axle. thanks | The frustrating thing about Dexter 6k axles is that there is two possible grease seals that could be used. Sometimes the hubs...
What Torque is Needed for Bolts on Equalizer for 2" Wide Slipper Springs
TREQ1304 Do you have torque spec for pivot and spring eye bolt to install new equalizer | When installing an equalizer like the Equalizer for 2" Wide Slipper Springs - 11" Long - 7/8" Center Hole # TREQ1304 there is no specific torque setting...
Replacement Grease Seal for Lippert 5,200 lb Trailer Axle
Need correct seal for Lippert axle on Grand Design 5th Wheel 29RS.2017. Is there a chart? From the axle’s tag: CUST Pat# 120064 Variant#: V000380236 LCI52-SBSA-86.5-68.5-NOSP-OS-L-65516-7225-BRONZE-30PT Serial #: 045-004080450 | Thank...
Replacement Hub and Spindle for TDE 11033 Hub
I have a 1992 Stratos bass boat single axle the spindle and hub is broke the 5 lug hub has a part #11033 T.D.E. the spindle has a round shaft 1 and 3/4 that is welded on and looks to be maybe 6 and 3/4 or 7 inches long wondering if you have...
Picking Out Grease Seal for Ultra Tow 783927
Do you happen to offer Ultra-Tow part #783927? I am looking for rear seal replacements for hubs I bought last year and cant seem to find that kit anywhere. Thanks | We were able to determine that the correct grease seal you would need is the...
Lug Nuts that Can Fit on Wheel Studs 7-262
will the lugs 1/2 20 fit these studs 1/2 Dexter Wheel Bolt - 1/2inch Diameter - 2-11/16inch Long - Qty 1 - 7-262 match with these lugsChrome Trailer Wheel Lug Nut - 1/2inch - Qty 1 - 12CLN-L also need to know if these bearing caps will fit...
Could Spring Seat of Dexter Axle be Moved to Fit New Application
My trailer axle says its a dexter HF=89.50 SC=71.50 #5200 lb . will this axle work for this replacement ? | The Dexter axle part # 8327820 could only fit your trailer if you installed new spring seats on it since it has spring seat centers at...
Replacement Bearings for 2000-lbs Dexter Trailer Axle
I purchased a 2018 SPACE trailer Long Neck that i need to get new bearings for. The company told me they use Dexter 2000lb axles but i am still not sure which bearings i need to get as there are a couple different 2000lb axles! I tried looking...
Keystone Cougar Camper Suspension Equalizer Replacement
Good Afternoon, I am looking to purchase new shackles and bolts and if recommended, equalizer for a 2003 Keystone Cougar 5th Wheel trailer. I am confident in my ability to change the part, but am having trouble finding the right kit to purchase....
How to Determine the Correct Grease Seal for Boat Trailer
I am looking for a double lip grease seal for a boat trailer with a 1.985 inch bearing buddy. I haven't taken the wheel hub apart yet. Do you have a seal that size? | A Bearing Buddy won't be how to determine the correct grease seal, and while...
How to Choose Correct Trailer Hub Replacement
My boat plus the engine weighs around 2.300 lbs. Im assuming my trailer had minimum capacity 2.500lbs. I need to change the hubs. Should I buy a hub capacity 2.500 lbs each or 1.250 lbs each? | Axle capacity is just one of the things you will...
Recommended Trailer Hub and Spindle for Compatibility with Wheels
Hi Team. I have a little trailer and evidently the axle spindles are uncommon in diameter. I need to get another hub so that I have a spare. The two that I have are in excellent condition and I just had new tires mounted on them. Sigh....
Can Dexter Trailer Idler Axle Be Used on Trailer With Springs that Sit On Top Of Axle
i have an older caravan trailer95and the axle sits under the spring will the bend in this axle hinder the performance due to it needing to be put on with the bend facing down. | The bend in the axle needs to be installed pointing upward, not...
Trailer Hub and Wheels for Inner Bearing 25580 and Outer Bearing 14125A
Seal- 2.24. Inner bearing 1.74 inch outer bearing 1.249 inch threds .995 inch can you tell me what hub I would need, and what wheels will fit that hub thanks | We have hubs that have a seal and bearings that are very close to the measurements...
Recommended Trailer Hub and Drum Assembly for 7,000 Pound Axle
Im looking to swap my dexter axles hubs to a more modern 6x5.5 bolt pattern its a 7000 pound axles what would be the best hub for the job? | In order to find compatible hub and drums for the 7,000 pound axle on your trailer, you will need to...
Needing to Find the Correct Bearing Buddies on 7,000 Lbs Trailer Axles
I recently purchased a new trailer that has bearing buddys. The axles are 7,000 lb and it is a triple axle. I like to keep spare parts on hand as I use the trailer extensively. I have used BBs before on a lot of trailers, this one is different....
Recommended Hubs with 4 on 4 Bolt Pattern and Double Lip Seal for CE Smith 1.8K Trailer Axle Beam
Hello, I am interested in purchasing CE33201GA axel and the AKIHUB-440-20G-2K hubs and the RG06-020 double lip seals. Will these match up ? | The CE Smith Trailer Axle Beam part # CE33201GA has EZ-Lube Spindles so you will want to use the Trailer...
What Type of Bushing Comes with 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles
Can I add a grease bolt to this? Is the sleeve of bushing metal or nylon? Just want to know if I should add a bolt with grease fitting or without. Also is there anything around sleeve such as rubber/poly like a normal press in bushing. Thank...
Is There An Easy Way To Determine The Correct Replacement Spindle For a 16 Foot Enclosed Trailer?
I have an older 2 axle 16 Interstate enclosed trailer. Any easy way to determine the correct spindle for replacement? Got really hot and not sure about getting dimensions | You maybe able to locate an axle tag on your axle which will have...
How to Determine Grease Seal For 2004 Viking Saga Trailer
2004 Viking Saga 2107 pop up with 7” x 1 1/4” brakes want to know what is the right inner grease seal for this trailer. Would like to order everything together instead of having to go get the grease seals after taking the hubs off. | We can...
Filter Your Search
Contact and Help