Does the UWS Locking Handle Come with the Lock Cylinder And Keys
does the locking handle come with the core and the keys | Yes the Replacement Locking Paddle Handle for UWS Toolboxes, item # UWSLOCKING, comes with the lock cylinder and keys. |
Truxedo TonneauMate TX1117416 Toolbox Compatibility With Extang EnCore Tonneau Cover
Is the Truxedo TonneauMate tool box compatible with the Extang Encore tonneau cover installed on a 2016 Silverado short bed? What other options are available? | According to Truxedo, their # TX1117416 TonneauMate toolbox wouldn't be compatible...
Interior Dimensions of the UWS Cargo Carrier for 2" Hitches
1. What are the interior dimensions of this item? 2. Does the item have a floor. | The interior dimensions of the 23" x 51" UWS Cargo Carrier for 2" Hitches # UWS65XR is 20-1/2" x 48 1-/2". As far as a floor, there is not a traditional floor...
Replacement Lift Cylinder Strut For UWS Toolboxes
I need a LT08-19 strut for my tool box on my car trailer do you have this part or know where to find it?? Thank you | While we do not carry the LT08-19 strut, the closest thing we have is the Replacement Lift Cylinder for UWS Toolboxes # UWSLIFTCYLIND...
Replacement CH545 Keys for Trailer Mounted Toolbox
I need replacement keys for CH545 lock on a gooseneck trailer toolbox. | We carry the replacement key you're looking for as part # CHK545. |
What Colors or Finishes Are Available of the UWS Wedge Series with Offset Lid and Notched Box
does this come in a brite finish | There is a silver/bright aluminum version of the # UWS01048 available with the UWS Truck Bed Chest - Wedge Series - Offset Lid - Notched Box - 12 cu ft - Bright Aluminum # UWS01040, but this would be the only...
Will The Replacement Key For UWS Tool Box Fit Unknown Tool Box With 501 Stamped On Lock Cylinder
My box is old and doesn’t have the name brand info. On the lock it is stamped just “501”but not “CH”. Will this matter? I don’t know what the CH stands for. Everything else looks the same but I want to make sure it is the same key before...
Availability of Replacement J Bolt for Spare Tire Carrier
I have a 2004 marine master boat trailer. My spare tire lock had corroded and would not unlock, so I had to cut the J Bolt that holds the spare tire to the spare tire cradle. Can you advise if you carry a replacement J Bolt and let me know...
Replacement Lock Cylinder And Keys For UWS Truck Box
I need to know which replacement cylinder in need for UWS Model # TBC-60-W truck box. I was told CH 509 by a friend but I wanted to make sure. Thanks | The UWS truck boxes have a variety of different cylinder numbers. The replacement number...
Availability of Locking T-Handle for UWS Toolbox
I have on my kayak trailer two side open single door 60 inch uws boxex in need of lock sets. my lock set says ch508 but you say these will not fit the t-handel model. which mine are ..they look the same. do you think these will work? I am in...
Fit of UWS Replacement Locking Paddle Handle # UWSLOCKING on Kobalt Trunk Toolbox
I have a Kobalt double lid tool box. Will your replacement locking paddle handle for uws toolboxes code: uwslocking work with this box. the handles look exactly the same to me. | UWS couldn't tell me if their # UWSLOCKING replacement locking...
What is Preferred Method For Securing Truck Tool Box to Truck Bed if J-Hooks Don't Work
I have a UWS box on my Tacoma that has come loose from the original J Bolt mounts. The box is able to slide forward and back, along with side to side. What is the best way to secure the box to the bed again? | Best way is to drill a hole through...
Does BOLT Toolbox Latch Retro Fit Kit Come with Striking Plate
I am interested in this locking mechanism. I did not see in the photos if it comes with a striking plate that could be mounted to a lid of a custom box I need to make for my customers horse trailer. Does it come with a striking plate? | The...
Can You Get Multiple Replacement Locking Paddle Handle for UWS Toolboxes Keyed Alike?
Can you get multiple units keyed the same? | The Replacement Locking Paddle Handle for UWS Toolboxes, # UWSLOCKING, doesn't come keyed alike. However, you can (have them keyed)KEY THEM the same by ordering Replacement Lock Cylinder for UWS Toolboxes...
Length of Replacement Tool Box Lift Cylinder
What are the lengths of the cylinder. Both fully open an fully closed? | The Replacement Lift Cylinder for UWS toolboxes, part # UWSLIFTCYLIND measures 7 inches in length when fully retracted, and 11 inches long when fully extended. |
Recommended Storage Solutions For A 2020 Ram 2500 Short Bed With Tonneau Cover And 5th Wheel Hitch
Hey guys I have a 2020 RAM 2500 short bed with a RAM branded M20 sliding hitch and a Pace Edwards rolling cover Which of your cargo boxes would fit under tonneau cover roll, forward of the hitch and give me the most storage? Thanks! Also -...
Compatibiltiy of UWS Connector Rod with DeeZee Tool Box Latch
Will the uws connectors work with a dee zee latch. Have had to replace the latches and it doesnt come with anything to attach the to latches together. | I went out to our warehouse and tested the UWS Rod-Connector # UWSRODCONNECTOR with the...
UWS Tool Box Lock Key CH508 Recommendation
Need keys for lock CH 508, was given another when purchased my truck recently. Can you provide? Didnt find on your web site. Thanks | The correct replacement key you would want for your UWS tool box that needs a CH 503 is the part # KEYCH503. |
Recommended Truck bed Tool Box For A Ford F-250 Super Duty With BAKFlip Tonneau Cover
Will this toolbox work with a bakflip cover? | BAKFlip tonneau covers are going to interfere with opening the lid of the UWS Truck Bed Chest - Wedge Series - Offset Lid - Notched Box # UWS01048. Instead you can use a toolbox like the UWS Truck...
Installation of Replacement Lock Cylinder for UWS Toolboxes
Hi just ordered a replacement CH 502 for my Tractor Supply UWS truck tool box which i have mounted on my atv trailer. Ive never had a key for this lock, so while removing it, I didnt pay attention to the position of the latch, as it was already...
Recommended Replacement Lock Cylinder and Keys for Truck Side Box
the back is round with a small half moon knob about 3/16 th of an inch it is a older side box on a truck this slides a bar up to lock a notch in the shaft of the handle i am looking the cylinder and keys | Replacement...
Similar Box To UWS Wedge Truck Bed Chest # UWS01044 without Wedge
Hi I like the UWS Truck Bed Chest - Wedge Series - Offset Lid - 8.2 cu ft - Gloss Black Item # UWS01044. However, I am wondering if there is a similar configuration with the only difference being that it does not have the angled lower front...
Will the Mounting Hardware for UWS Truck Bed Chests Work with an Aluminum Truck Bed in a Ford
Is part# UWS08353 compatibly with a 2022 Ford Super duty aluminum truck bed to mount a UWS chest box #TBC-48-BLK? | Yes, the Mounting Hardware for UWS Truck Bed Chests # UWS08353 is compatible with the UWS 48" Standard Chest Toolbox # UWS01061...
Replacement 10-Inch Gas Strut for Lid of Husky Tool Box
Need to replace gas shocks on a Husky aluminum tool box. The shocks are Contico 4031540. They are 10inch from mount to mount. Other numbers on the shock are: 7835PB 0155N 349/02 A 2 40231035 Can you supply? | We offer a replacement heavy-duty...
Filter Your Search
Contact and Help